The MTCL library aims to provide a common (and simple enough) interface for several back-end communication libraries. Currently we support TCP/IP, MPI, MPIP2P (i.e., dynamic MPI), UCX, MQTT. The Shared Memory (SHM) support is still experimental.

• ** MPI ** (OPTIONAL) :

  OpenMPI is required for using the MPI library as transport protocol. By default, it is disabled. It can be enabled by defining the environmental variable TPROTOCOL=MPI and by properly setting MPI_HOME to point to the OpenMPI install dir.

• ** MQTT ** (OPTIONAL) :

  For using the MQTT protocol as transport layer, Paho MQTT Cpp and a MQTT broker/server are needed. By default, MQTT is disabled. It can be enabled by defining the environmental variable TPROTOCOL=MQTT and by properly setting MQTT_HOME to point to the Paho MQTT Cpp install dir. As MQTT broker/server Mosquitto is one of the options. Under Linux Ubuntu it can be installed using 'sudo apt install mosquitto'.

  --- How to compile and install Paho MQTT Cpp ----

  Download Paho MQTT C from github: https://github.com/eclipse/paho.mqtt.c

    export MQTT_HOME=<where-you-want-to-install-paho>
    cd paho.mqtt.c
    prefix=${MQTT_HOME} make install
  

  Download Paho MQTT Cpp from github: https://github.com/eclipse/paho.mqtt.cpp

    cd paho.mqtt.cpp
    cmake -Bbuild -H. -DCMAKE_INSTALL_PREFIX=${MQTT_HOME} \
                      -DCMAKE_PREFIX_PATH=${MQTT_HOME}
    cd build
    make install
  

• ** UCX ** (OPTIONAL) :

  Download UCX from github: https://github.com/openucx/ucx

  --- How to compile and install UCX ---

  $ export UCX_HOME=<ucx-install-path>
  $ ./autogen.sh
  $ ./contrib/configure-release --prefix=${UCX_HOME} --enable-mt
  $ make -j8
  $ make install
  

• ** UCC ** (OPTIONAL, requires UCX):

  Download UCC from github: https://github.com/openucx/ucc

  --- How to compile and install UCC ---

  $ export UCC_HOME=<ucc-install-path>
  $ ./autogen.sh
  $ ./configure --prefix=${UCC_HOME} --with-ucx=<ucx-install-path> [--with-r
  6340
  ocm=no --with-ibverbs=no --with-cuda=no]
  $ make
  

• ** RapidJSON **

  We use RapidJSON to parse configuration files. If you do not want to use the config file you don't need to install it.