Nothing Special   »   [go: up one dir, main page]

November 21, 2024

Posts Comments

Archives for February 2008

pesky details with getting a voting system correct

February 29, 2008 by

Today was the last day of early voting in Texas’s primary election. Historically, I have never voted in a primary election. I’ve never felt I identified enough with a particular political party to want to have a say in selecting their candidates. Once I started working on voting security, I discovered that this also allowed me to make a legitimate claim to being “non-partisan.” (While some election officials, political scientists, and others who you might perhaps prefer to be non-partisan do have explicit partisan views, many more make a point of similarly obscuring their partisan preferences like I do.)

In Texas, you are not required to register with a party in order to vote in their primary. Instead, you just show up and ask for their primary ballot. In the big city of Houston, any registered voter can go to any of 35 early voting locations over the two weeks of early voting. Alternately, they may vote in their home, local precinct (there are almost a thousand of these) on the day of the election. There have been stories of long lines over the past two weeks. My wife wanted to vote, but procrastinating, we went on the final night to a gigantic supermarket near campus. Arriving at 5:50pm or so, she didn’t reach the head of the queue until 8pm. Meanwhile, I took care of our daughter and tried to figure out the causes of the queue.

There were maybe twenty electronic voting machines, consistently operating at between 50-70% utilization (i.e., as many as half of the voting machines were unused at any given time). Yet the queue was huge. How could this be? Turns out there were four people at the desk in front dealing with the sign-in procedure. In a traditional, local precinct, this is nothing fancier than flipping open a paper printout to the page with your name. You sign next to it, and then you go vote. Simple as can be. Early voting is a different can of worms. They can’t feasibly keep a printout with over a million names of it in each of 35 early voting centers. That means they need computers. Our county’s computers had some kind of web interface that they could use to verify the voter’s registration. They then print a sticker with your name on it, you sign it, and it goes into a book. If a voter happens to present their voter registration card (my wife happened to have hers with her), the process is over in a hurry. Otherwise, things slow down, particularly if, say, your driver’s license doesn’t match up with the computer. “What was your previous address?” Unsurprisingly, the voter registration / sign-in table was the bottleneck. I’ve seen similar effects beforehand when voting early.

How could you solve this problem? You could have an explicit “fast path” for voters who match quickly versus a “slow path” with a secondary queue for more complicated voters. You can have more registration terminals. You could have roving helpers with PDAs and battery-powered printers that try to get further back into the queue and help voters reconcile themselves with their “true” identity. There’s no lack of creativity that’s been applied to solving this class of problems outside of the domain of election management.

Now, these voter registration systems are not subject to any of the verification and testing procedures that apply to the electronic voting machines themselves. Any vendor can sell pretty much anything and the state government doesn’t have much to say about it. That’s both good and bad. It’s clearly bad because any vetting process might have tried to consider these queueing issues and would have issued requirements on how to address the problem. On the flip side, one of the benefits of the lack of regulation is that the vendor(s) could ostensibly fix their software. Quickly.

To the extent there’s a moral to this story, it’s that the whole system matters. For the most part, we computer security folks have largely ignored voter registration as being somebody else’s problem. Maybe there’s a market for some crack programmer to crank out a superior solution in the time it took to read this blog post and get us out of the queue and into the voting booth.

(Sidebar: Turns out, the Texas Democratic Party has both a primary election and a caucus. Any voter who casts a vote in the primary is elgible to caucus with the party. The caucus locations are the same as the local polling places, with caucusing starting 15 minutes after the close of the polls. Expect stories about crowding, confusion, and chaos, particularly given the crowded, small precinct rooms and relatively few people with experience in the caucusing process. Wikipedia has some details about the complex process by which the state’s delegates are ultimately selected. There may or may not be lawsuits over the process as well.)

Filed Under: Other Topics Tagged With:

Cold Boot Attacks: Vulnerable While Sleeping

February 26, 2008 by

Our research on cold boot attacks on disk encryption has generated lots of interesting discussion. A few misconceptions seem to be floating around, though. I want to address one of them today.

As we explain in our paper, laptops are vulnerable when they are “sleeping” or (usually) “hibernating”. Frequently used laptops are almost always in these states when they’re not in active use – when you just close the lid on your laptop and it quiets down, it’s probably sleeping.

When a laptop goes to sleep, all of the data that was in memory stays there, but the rest of the system is shut down. When you re-open the lid of the laptop, the rest of the system is activated, and the system goes on running, using the same memory contents as before. (Hibernating is similar, but the contents of memory are copied off to the hard drive instead, then brought back from the hard drive when you re-awaken the machine.) People put their laptops to sleep, rather than shutting them down entirely, because a sleeping machine can wake up in seconds with all of the programs still running, while a fully shut-down machine will take minutes to reboot.

Now suppose an attacker gets hold of your laptop while it is sleeping, and suppose the laptop is using disk encryption. The attacker can take the laptop back to his lair, and then open the lid. The machine will reawaken, with the same information in memory that was there when you put the machine to sleep – and that information includes the secret key that is used to encrypt the files on your hard disk. The machine may be screen-locked – that is, it may require entry of your password before you can interact with the desktop – but the attacker won’t care. All he cares about is that the encryption key is in memory.

The attacker will then insert a special thumb drive into the laptop, yank out the laptop’s battery, quickly replace the battery, and push the power button to reboot the laptop. The encryption key will still be in memory – the memory will not have lost its contents because the laptop was without power only momentarily while the battery was out. It doesn’t matter how long the laptop takes to reboot, because the memory contents are fading only momentarily while the battery is out. When the laptop boots, software from the thumb drive will read the contents of memory, find the secret encryption key, and proceed to unlock the encrypted files on your hard drive.

In short, the adversary doesn’t need to capture your laptop while the laptop is open and in active use. All he needs is to get your laptop while it is sleeping – which it is probably doing most of the time.

Filed Under: Uncategorized Tagged With: , ,

New Research Result: Cold Boot Attacks on Disk Encryption

February 21, 2008 by

Today eight colleagues and I are releasing a significant new research result. We show that disk encryption, the standard approach to protecting sensitive data on laptops, can be defeated by relatively simple methods. We demonstrate our methods by using them to defeat three popular disk encryption products: BitLocker, which comes with Windows Vista; FileVault, which comes with MacOS X; and dm-crypt, which is used with Linux. The research team includes J. Alex Halderman, Seth D. Schoen, Nadia Heninger, William Clarkson, William Paul, Joseph A. Calandrino, Ariel J. Feldman, Jacob Appelbaum, and Edward W. Felten.

Our site has links to the paper, an explanatory video, and other materials.

The root of the problem lies in an unexpected property of today’s DRAM memories. DRAMs are the main memory chips used to store data while the system is running. Virtually everybody, including experts, will tell you that DRAM contents are lost when you turn off the power. But this isn’t so. Our research shows that data in DRAM actually fades out gradually over a period of seconds to minutes, enabling an attacker to read the full contents of memory by cutting power and then rebooting into a malicious operating system.

Interestingly, if you cool the DRAM chips, for example by spraying inverted cans of “canned air” dusting spray on them, the chips will retain their contents for much longer. At these temperatures (around -50 °C) you can remove the chips from the computer and let them sit on the table for ten minutes or more, without appreciable loss of data. Cool the chips in liquid nitrogen (-196 °C) and they hold their state for hours at least, without any power. Just put the chips back into a machine and you can read out their contents.

This is deadly for disk encryption products because they rely on keeping master decryption keys in DRAM. This was thought to be safe because the operating system would keep any malicious programs from accessing the keys in memory, and there was no way to get rid of the operating system without cutting power to the machine, which “everybody knew” would cause the keys to be erased.

Our results show that an attacker can cut power to the computer, then power it back up and boot a malicious operating system (from, say, a thumb drive) that copies the contents of memory. Having done that, the attacker can search through the captured memory contents, find any crypto keys that might be there, and use them to start decrypting hard disk contents. We show very effective methods for finding and extracting keys from memory, even if the contents of memory have faded somewhat (i.e., even if some bits of memory were flipped during the power-off interval). If the attacker is worried that memory will fade too quickly, he can chill the DRAM chips before cutting power.

There seems to be no easy fix for these problems. Fundamentally, disk encryption programs now have nowhere safe to store their keys. Today’s Trusted Computing hardware does not seem to help; for example, we can defeat BitLocker despite its use of a Trusted Platform Module.

For more details, see the paper site.

Filed Under: Uncategorized Tagged With: , ,

Comcast's Disappointing Defense

February 18, 2008 by

Last week, Comcast offered a defense in the FCC proceeding challenging the technical limitations it had placed on BitTorrent traffic in its network. (Back in October, I wrote twice about Comcast’s actions.)

The key battle line is whether Comcast is just managing its network reasonably in the face of routine network congestion, as it claims, or whether it is singling out certain kinds of traffic for unnecessary discrimination, as its critics claim. The FCC process has generated lots of verbiage, which I can’t hope to discuss, or even summarize, in this post.

I do want to call out one aspect of Comcast’s filing: the flimsiness of its technical argument.

Here’s one example (p. 14-15).

As Congresswoman Mary Bono Mack recently explained:

The service providers are watching more and more of their network monopolized by P2P bandwidth hogs who command a disproportionate amount of their network resources. . . . You might be asking yourself, why don’t the broadband service providers invest more into their networks and add more capacity? For the record, broadband service providers are investing in their networks, but simply adding more bandwidth does not solve [the P2P problem]. The reason for this is P2P applications are designed to consume as much bandwidth as is available, thus more capacity only results in more consumption.

(emphasis in original). The flaws in this argument start with the fact that the italicized segment is wrong. P2P protocols don’t aim to use more bandwidth rather than less. They’re not sparing with bandwidth, but they don’t use it for no reason, and there does come a point where they don’t want any more.

But even leaving aside the merits of the argument, what’s most remarkable here is that Comcast’s technical description of BitTorrent cites as evidence not a textbook, nor a standards document, nor a paper from the research literature, nor a paper by the designer of BitTorrent, nor a document from the BitTorrent company, nor the statement of any expert, but a speech by a member of Congress. Congressmembers know many things, but they’re not exactly the first group you would turn to for information about how network protocols work.

This is not the only odd source that Comcast cites. Later (p. 28) they claim that the forged TCP Reset packets that they send shouldn’t be called “forged”. For this proposition they cite some guy named George Ou who blogs at ZDNet. They give no reason why we should believe Mr. Ou on this point. My point isn’t to attack Mr. Ou, who for all I know might actually have some relevant expertise. My point is that if this is the most authoritative citation Comcast can find, then their argument doesn’t look very solid. (And, indeed, it seems pretty uncontroversial to call these particular packets “forged”, given that they mislead the recipient about (1) which IP address sent the packet, and (2) why the packet was sent.)

Comcast is a big company with plenty of resources. It’s a bit depressing that they would file arguments like this with the FCC, an agency smart enough to tell the difference. Is this really the standard of technical argumentation in FCC proceedings?

Filed Under: Uncategorized Tagged With: , , ,

The continuing saga of Sarasota's lost votes

February 8, 2008 by

At a hearing today before a subcommittee of Congress’s Committee on House Administration, the U.S. Government Accountability Office (GAO) reported on the results of their technical investigation into the exceptional undervote rate in the November 2006 election for Florida’s 13th Congressional District.

David Dill and I wrote a long paper about shortcomings in previous investigations, so I’m not going to present a detailed review of the history of this case. [Disclosure: Dill and I were both expert witnesses on behalf of Jennings and the other plaintiffs in the Jennings v. Buchanan case. Writing this blog post, I’m only speaking on my own. I do not speak on behalf of Christine Jennings or anybody else involved with the campaign.]

Heavily abridged history: One in seven votes recorded on Sarasota’s ES&S iVotronic systems in the Congressional race were blank. The margin of victory was radically smaller than this. If you attempt to do a statistical projection from the votes that were cast onto the blank votes, then you inevitably end up with a different candidate seated in Congress.

While I’m not a lawyer, my understanding of Florida election law is that the summary screen, displayed before the voter casts a vote, is what really matters. If the summary screen showed no vote in the race and the voter missed it before casting the ballot, then that’s tough luck for them. If, however, the proper thing was displayed on the summary screen and things went wrong afterward, then there would be a legal basis under Florida law to reverse the election.

Florida’s court system never got far enough to make this call. The judge refused to even allow the plaintiffs access to the machines in order to conduct their own investigation. Consequently, Jennings took her case directly to Congress, which has the power to seat its own members. The last time this particular mechanism was used to overturn an election was in 1985. It’s unclear exactly what standard Congress must use when making a decision like this. Should they use Florida’s standard? Should they impose their own standard? Good question.

Okay, then. On to the GAO’s report. GAO did three tests:

  1. They sampled the machines to make sure the firmware that was inside the machines was the firmware that was supposed to be there. They also “witnessed” the source code being compiled and yielding the same thing as the firmware being used. Nothing surprising was found.
  2. They cast a number of test ballots. Everything worked.
  3. They deliberately miscalibrated some iVotronic systems in a variety of different ways and cast some more test votes. They found the machines were “difficult to use”, but that the summary screens were accurate with respect to the voter’s selections.

What they didn’t do:

  • They didn’t conduct any controlled human subject tests to cast simulated votes. Such a test, while difficult and expensive to perform, would allow us to quantify the extent to which voters are confused by different aspects of the voting system’s user interface.
  • They didn’t examine any of the warehoused machines for evidence of miscalibration. They speculate that grossly miscalibrated machines would have been detected in the field and would have been either recalibrated or taken out of service. They suggest that two such machines were, in fact, taken out of service.
  • They didn’t go through any of ES&S’s internal change logs or trouble tickets. If ES&S knows more, internally, about what may have caused this problem, they’re not saying and GAO was unable to learn more.
  • For the tests that they did conduct, GAO didn’t describe enough about the test setup and execution for us to make a reasonable critique of whether their test setup was done properly.

GAO’s conclusions are actually rather mild. All they’re saying is that they have some confidence that the machines in the field were running the correct software, and that the software doesn’t seem to induce failures. GAO has no opinion on whether poor human factors played a factor, nor do they offer any opinion on what the legal implications of poor human factors would be in terms of who should have won the race. Absent any sort of “smoking gun” (and, yes, 18,000 undervotes apparently didn’t make quite enough smoke on their own), it would seem unlikely that the Committee on House Administration would vote to overturn the election.

Meanwhile, you can expect ES&S and others to use the GAO report as some sort of vindication of the iVotronic, in specific, or of paperless DRE voting systems, in general. Don’t buy it. Even if Sarasota’s extreme undervote rate wasn’t itself sufficient to throw out this specific election result, it still represents compelling evidence that the voting system, as a whole, substantially failed to capture the intent of Sarasota’s voters. Finally, the extreme effort invested by Sarasota County, the State of Florida, and the GAO demonstrates the fundamental problem with the current generation of paperless DRE voting systems: when problems occur, it’s exceptionally difficult to diagnose them. There simply isn’t enough information left behind to determine what really happened during the election.

Other articles on today’s news: CNet News, Bradeton Herald, Sarasota Herald-Tribune, NetworkWorld, Miami Herald (AP wire story), VoteTrustUSA

UPDATE (2/12): Ted Selker (MIT Media Lab) has a press release online that describes human factors experiments with a Flash-based mock-up of the Sarasota CD-13 ballot. They appear to have found undervote rates of comparable magnitude to those obvserved in Sarasota. A press release is very different from a proper technical report, much less a conference or journal publication, so it’s inappropriate to look to this press release as “proof” of any sort of “ballot blindness” effect.

Filed Under: Uncategorized Tagged With: