Sesion 9 2 Redes WAN
Sesion 9 2 Redes WAN
Sesion 9 2 Redes WAN
REDES WAN
LAN 1 LAN 2
WAN
REDES WAN
• Redes formada para la integración de computadores
localizados geográficamente distantes.
• Normalmente utilizan líneas de comunicación de dados
ofrecidas por empresas de telecomunicaciones ( Telefónica,
AT&T, Óptica ip, Bellsoutht etc).
TCP/IP
WAN
CARACTERISTICAS REDES WAN
Ejm:
RED WAN
RED WAN
WAN - COMPONENTES
Módem
WAN
Módem
WAN - COMPONENTES
Satélite
UPLINK DOWLINK
EARTH EARTH
STATION STATION
WAN - COMPONENTES
Frequency
Modulated Signal
RF Signal
Modulator
Demodulator
Microware Tower Amplifier
RF Signal
• Línea dedicada.
• Conmutación de circuitos.
• Conmutación de paquetes.
LINEA DEDICADA
Serie síncrono
CONMUTACION DE CIRCUITOS
La conmutación de circuitos es un método de conmutación para
una red WAN en la cual debe existir una ruta dedicada entre el
emisor y el receptor durante la duración de la llamada.
Serie asíncrono,
RDSI Capa 1
Compañía
Telefónica
CONMUTACION DE PAQUETES
La conmutación de paquetes es un método de conmutación para
WAN en la cual los dispositivos de red comparten un enlace
individual punto a punto para transportar paquetes desde un
origen a un destino, a través de una red.
Serie síncrono
Proveedor
de Servicio
ENCAPSULAMIENTO WAN
Cuando subimos de capa en el modelo OSI, los dispositivos serie
deben encapsular los datos en un formato de trama de Capa 2.
Diferentes servicios pueden utilizar diferentes formatos de trama.
Para asegurar que se utiliza el protocolo correcto, es necesario
configurar el tipo apropiado de encapsulado de Capa 2. La elección
del protocolo depende de la tecnología WAN y del equipo de
comunicaciones.
Conmutación Proveedor
de paquetes de Servicio
Conmutación
Compañía
de circuitos
Telefónica
ENRUTAMIENTO ESTATICO
192.168.6.0/24
F0/0 R1
S0/1
F0/1
DCE 200.3.3.0/2
4
192.168.2.0/24
S0/0 192.168.4.0/24
R3 F0/0
DTE
ROUTER 1
Router> enable
Router# configure terminal
Router(config)# hostname R1
R1(config)# interface fastethernet 0/0
R1(config-if)# ip address 192.168.1.1 255.255.255.0
R1(config-if)# no shutdown
R1(config-if)# exit
Router> enable
Router# configure terminal
Router(config)# hostname R2
R2(config)# interface fastethernet 0/0
R2(config-if)# ip address 192.168.3.1 255.255.255.0
R2(config-if)# no shutdown
R2(config-if)# exit
Router> enable
Router# configure terminal
Router(config)# hostname R3
R3(config)# interface fastethernet 0/0
R3(config-if)# ip address 192.168.4.1 255.255.255.0
R3(config-if)# no shutdown
R3(config-if)# exit
Router> enable
Router# configure terminal
Router(config)# hostname R4
R4(config)# interface fastethernet 0/0
R4(config-if)# ip address 192.168.5.1 255.255.255.0
R4(config-if)# no shutdown
R4(config-if)# exit
192.168.1.0/24
MIRAFLORES
F0/0
DCE
PPP
.1
.2 R3
R1 200.1.1.0/24
F0/1 S0/0 DTE F0/1 F0/0
LIMA .1
200.3.1.0/24
.2
S0/0 .1
192.168.2.0/24 F0/1 192.168.5.0/24
S0/1 RC
.2
F0/0
200.2.1.0/24
DCE DTE F0/1
.1 PPP .3
S0/0 192.168.4.0/24
R4
R2 F0/0 .1
F0/0
192.168.3.0/24 192.168.6.0/24
SAN ISIDRO
TRUJILLO
.2 .3 .4
SERVER SERVER SERVER
WEB MAIL APLICATIVOS
ROUTER 1 (TACNA)
Router> enable
Router# configure terminal
Router(config)# hostname R1
R1(config)# interface fastethernet 0/0
R1(config-if)# ip address 192.168.1.1 255.255.255.0
R1(config-if)# no shutdown
R1(config-if)# exit
Router> enable
Router# configure terminal
Router(config)# hostname R2
R2(config)# interface fastethernet 0/0
R2(config-if)# ip address 192.168.3.1 255.255.255.0
R2(config-if)# no shutdown
R2(config-if)# exit
Router> enable
Router# configure terminal
Router(config)# hostname R3
R3(config)# interface fastethernet 0/0
R3(config-if)# ip address 192.168.5.1 255.255.255.0
R3(config-if)# no shutdown
R3(config-if)# exit
Router> enable
Router# configure terminal
Router(config)# hostname R4
R4(config)# interface fastethernet 0/0
R4(config-if)# ip address 192.168.6.1 255.255.255.0
R4(config-if)# no shutdown
R4(config-if)# exit