Computing">
COM-843 Manual
COM-843 Manual
COM-843 Manual
de 300 Mbps
COM-843
Gracias por la compra de este producto Steren.
“La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que
este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe
aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.”
2
IMPORTANTE
3
1. CARACTERÍSTICAS
La tarjeta de red inalámbrica USB 2,0 de rango extendido le permite conectar su
computadora de escritorio o portátil, a una red local de forma inalámbrica.
4
2. INSTALACIÓN DE DRIVERS Y
HARDWARE EN WINDOWS 7
Encienda la computadora e inserte el CD incluido dentro de la unidad de CD-ROM. La pan-
talla de instalación aparecerá. En caso contrario, presione el botón de Inicio, elija Ejecutar e
introduzca D:\setup.exe (si la unidad D es su unidad de CD-ROM, en caso contrario, escriba
la unidad correcta).
• Presione Siguiente.
Utilice la utilidad LAN inalámbrica para buscar redes inalámbricas disponibles, revise
información de conexión o cree perfiles que contengan los diferentes parámetros de
configuración. Puede dar doble clic al ícono en su escritorio para ejecutarlo.
De manera alternativa, presione Inicio > Programas > REALTEK 11n USB Wireless LAN
Utility > REALTEK 11n USB Wireless LAN Utility.
3.1 General
6
• Información general
• Dirección de red
• Otros
-Mostrar ícono de la bandeja: Muestra el ícono USB Wireless LAN en la barra de tareas de
Windows.
-Deshabilitar adaptador: Deshabilita la tarjeta de red inalámbrica.
-Radio desactivada: Enciende la transmisión de radio del adaptador inalámbrico.
-Virtual WiFi allowed: Permite el uso del adaptador como punto de acceso.
7
3.2. Perfil
3.2.1 Agregar
Útil para crear un nuevo perfil.
3.2.2. Quitar
Seleccione el perfil no deseado y elimínelo
con el botón “Quitar”.
3.2.3. Editar
Seleccione el perfil y presione el botón “Edit” para comenzar
la edición. Realice los cambios que necesite y confirme con
Aceptar.
9
3.2.4. Duplicar
Seleccione el perfil que desea copiar y dé clic en el botón “Duplicate”. Introduzca el
nombre del nuevo perfil en la caja de texto.
3.4. Estado
La ventana Estado muestra los datos del adaptador.
10
3.5. Estadísticas
La tabla de estadísticas muestra datos de paquetes transmitidos y recibidos durante esta
sesión. Puede hacer clic en el botón “Reset” para borrar estos valores y restaurar la cuenta.
A: Por NIP
Seleccione la pestaña de “Configuración de protección WiFi” en la utilidad del adaptador.
Para elegir el NIP WPS seleccione la caja “Input PIN from AP”,
proporcione un NIP WPS y haga clic en Configuración de entrada NIP. Este NIP generalmen-
te se imprime en una etiqueta en el ruteador. Si no se encuentra en el ruteador o ha sido
cambiado, es posible que tenga que acceder a la interfaz del ruteador.
Si lo prefiere, puede optar por utilizar el NIP que ofrece este adaptador inalámbrico, haga
clic en Configuración de entrada NIP (PIN Input Config) e introduzca el NIP en la interfaz
del ruteador.
B: Por botón
Presione y mantenga presionado el botón WPS en la parte posterior del ruteador hasta que
el LED parpadee (o como se indique en el manual del fabricante)
Presione el botón WPS en el adaptador de red inalámbrica y mantenga pulsado durante
3-5 segundos.
Si hay más de un punto de acceso cuando se utiliza el método botón, puede haber conflicto
de sesiones. Por favor, utilice el método de NIP o espere para presionar el botón de nuevo.
11
3.7. Easy Sharing
Puede configurar carpetas para que se compartan fácilmente de manera inalámbrica con
otros dispositivos de la red. Seleccione “Manage Shared Folder(s)”. Seleccione la carpeta
que desee compartir con el botón “Select” y agrégela a la lista con “Add”. Utilice el botón
“Delete” para borrar una carpeta de la lista y presione “OK” para cerrar los ajustes.
B: Haga clic en Modo en la barra de menú y seleccione Punto de Acceso. Cambiará a Modo
de Punto de Acceso automáticamente.
12
5. PROBLEMAS Y SOLUCIONES
PROBLEMA SOLUCIÓN
Vuelva a conectar el Adaptador USB Inalámbrico 11N en la
entrada para USB de su computadora.
Haga clic Derecho en Mi computadora y seleccione
Propiedades. Seleccione el administrador de dispositivos y
haga clic en el Adaptador de Red. Encontrará el Adaptador
si es instalado exitosamente. Si observa la marca de
exclamación amarilla, los recursos están en conflicto.
Observará el estado del Adaptador. Si hay una marca
de interrogación amarilla, por favor revise lo siguiente:
El adaptador no trabaja
adecuadamente. - Asegúrese de que su PC tiene un libre IRQ (Interrupt
ReQuest) (Solicitud Interrumpida) (un hardware interrumpido
en una PC).
- Asegúrese de que ha insertado el adaptador correcto
e instale el disco adecuado. Si el Adaptador no funciona
después de intentar los pasos anteriores, remueva el
adaptador y realice lo siguiente:
- Desinstale el software del disco de su PC.
- Reinicie su PC y repita el hardware y la instalación del
software como se especifica en esta Guía de Usuario.
- Asegúrese de que todos los dispositivos relacionados están
No se puede encendidos.
comunicar con otras
computadoras - Asegúrese de que su adaptador está configurado en el
vinculadas en la mismo canal y con las mismas opciones de seguridad
configuración de la como con las otras computadoras en la Configuración de la
infraestructura. Infraestructura.
13
- Revise que los indicadores del LED para el módem de
banda ancha estén indicando una actividad normal. Si no,
hay un problema con la conexión de banda ancha.
- Revise que los indicadores del LED en el ruteador
inalámbrico están funcionando adecuadamente. Si no es
así, revise que el cable de corriente y los cables de Ethernet
estén firmemente conectados.
- Revise que la dirección IP, la máscara de subred, la puerta
de entrada y los ajustes del DNS están correctamente
introducidos en la red.
¿Qué puede hacer En el modo de Infraestructura, asegúrese de que el mismo
cuando la computadora SSID está especificado en los ajustes para los visitantes
con el adaptador inalámbricos y los puntos de acceso.
instalado no está
conectado a la red En el modo ad hoc, ambos visitantes inalámbricos necesitarán
inalámbrica y/o el tener el mismo SSID. Por favor, note que será necesario
Internet? configurar un cliente para establecer un BSS (Basic service
Set) (Ajuste de Servicio Básico) y espere brevemente antes
de configurar otros visitantes. Esto previene a varios visitantes
para tratar de establecer un BSS al mismo tiempo, el cual
puede resultar en un múltiple BSS siendo establecido en
lugar de un BSS individual con múltiples visitantes asociados.
Revise que la conexión de red para los visitantes inalámbricos
esté configurada adecuadamente.
Si la seguridad está activada, asegúrese de que las
coincidencias de las claves de cifra están introducidas tanto
en el adaptador como en el punto de acceso.
14
6. ESPECIFICACIONES
IEEE 802,11n (draft 2,0); IEEE 802,11g;
Estándares:
IEEE 802,11b; CSMA/CA con ACK
OFDM/CCK/16-QAM/64-QAM/BPSK/QPSR/
Tecnología de modulación:
DQPSR/DBPSK
15
Tipo de antena: Antenas internas omni-direccionales
El diseño del producto y las especificaciones pueden cambiar sin previo aviso.
16
Producto: Tarjeta de red inalámbrica USB 2,0 de 300 Mbps
Modelo: COM-843
Marca: Steren
PÓLIZA DE GARANTÍA
Esta póliza garantiza el producto por el término de un año en todas sus partes y mano de obra, contra
cualquier defecto de fabricación y funcionamiento, a partir de la fecha de entrega.
CONDICIONES
1.- Para hacer efectiva la garantía, presente esta póliza y el producto, en donde fue adquirido o en
Electrónica Steren S.A. de C.V.
2.- Electrónica Steren S.A de C.V. se compromete a reparar el producto en caso de estar defectuoso sin
ningún cargo al consumidor. Los gastos de transportación serán cubiertos por el proveedor.
3.- El tiempo de reparación en ningún caso será mayor a 30 días, contados a partir de la recepción del
producto en cualquiera de los sitios donde pueda hacerse efectiva la garantía.
4.- El lugar donde puede adquirir partes, componentes, consumibles y accesorios, así como hacer válida esta
garantía es en cualquiera de las direcciones mencionadas posteriormente.
This manual includes all the feature operations and troubleshooting necessary
to install and operate your new Steren´s 300 Mbps wireless
USB adapter.
www.steren.com
The instructions of this manual are for reference about the product. There may
be differences due to updates.
Please check our website (www.steren.com) to obtain the latest version of the
instruction manual.
“The operation of this equipment is subject to the following two conditions: (1) it is possible that
this equipment or device may not cause harmful interference, and (2) this device or device must
accept any interference, including interference that may cause undesired operation .”
2
IMPORTANT
• Do not try to open the device, may cause damages and warranty will be void.
• To prevent fire or shock hazard, do not expose the device to rain or moisture.
• Do not mix electric and electronics products with domestic garbage. Help to avoid adverse
effects on human health and the environment. Contact your local authority for detailed
reports on the collection of electrical and electronic equipment.
3
1. HIGHLIGHTS
The Wireless –N USB 2.0 adapter allows you to connect your desktop or laptop to a local
network, wirelessly.
- USB port.
4
2. DRIVERS AND HARDWARE
INSTALLATION WINDOWS 7
Turn on the computer and insert the included CD into your CD-ROM drive. The installation
screen appears. Otherwise, press the Start button and choose Run, enter D:\setup.exe (if
drive D is your CD-ROM drive if not, enter the correct drive).
• Press Next.
5
3. SYSTEM CONFIGURATION
This wireless adapter has two modes of use: station and access point. The default mode is
station. You can choose a router or wireless remote access point to connect in station mode.
In access point mode, the USB adapter acts as a wireless access point that wireless clients
can connect and share a connection.
Use the wireless LAN utility to search for available wireless networks, check connection
information or create profiles that contain different configuration parameters. You can give
double clicking the icon on your desktop to run it.
Alternatively, press start > programs > COM-844 USB Wireless LAN Utility > COM-844 USB
wireless LAN utility.
3.1 General
6
• General information
• Network address
• Other
-Show tray icon: Shows the USB Wireless LAN icon in the Windows taskbar.
-Disable adapter: Disable the wireless network card.
-Radio disabled: Turn on the wireless adapter radio transmission.
-Virtual WiFi allowed: Allows the use of the adaptor as access point.
7
3.2 Profile
3.2.1 Add
Useful to create a new profile.
Select OK.
8
• Create a new ad hoc profile.
and select the operation channel for the network from the channel drop-down menu.
Select network authentication mode and the type of data entry, confirm the network key.
Select OK.
3.2.2 Remove
Select the unwanted profile and delete it
with the “Remove” button.
3.2.3 Edit
Select profile and press the “Edit” button to start editing. Make
the changes you require and confirm with OK.
9
3.2.4 Duplicate
Select the profile that you want to copy and select the “Duplicate” button. Enter the name of
the new profile in the text box.
3.4 Status
The status window displays data from the adapter.
10
3.5 Statistics
The statistics table shows data packets transmitted and received during this session. You
can click the “Reset” button to clear these values and restore the account.
A: By NIP
Select the “Protection WiFi settings” tab in the adaptor utility.
To choose the WPS NIP select “Input NIP from AP” box, provide WPS NIP and click “Input
pin configuration”. This PIN is usually printed on a label on the router. If it is not on the router
or has been changed, it is possible you may need to access the router interface.
If you prefer, you can choose to use the NIP that offers this wireless adapter, click input pin
configuration (PIN Input Config) and insert the PIN in the router interface.
B: By button
Press and hold the WPS button on the back of the router until the LED blinks (or as marked
on the manufacturer’s manual).
Press the WPS button on your wireless network adapter and hold for 3-5 seconds.
It can also be used in reverse order - press and hold the WPS button on the adapter briefly,
then press and hold the WPS button on the router.
If there is more than one access point when using the method button, it can be session
conflict. Please use the PIN method or wait to press the button again.
11
3.7 Easy Sharing
You can configure folders so that they are easily shared wirelessly with other devices on the
network. Select “Manage Shared Folder(s)”. Select the folder that you want to share with the
“Select” button and confirm with “Add”. Use the “Delete” button to delete a folder from the list
and press “OK” to close the settings.
A: Select the “Virtual WiFi allowed”checkbox. The Virtual WiFi tab will appear.
To start the access point mode, select the “Start flexible Virtual WiFi AP” box. Use the
“Settings” button to assign the network name and key. Click OK to save the data.
Check the “Set Internet connection sharing (ICS)” box to share a connection to the Internet
from your computer. The public network automatic mode is selected by default. If you want
to share another connection, uncheck “Automatic public network” and select the connection
from the drop-down menu.
B: Click on mode in the menu bar and select access point. Automatically switches to access
point mode.
12
5. TROUBLESHOOTING
PROBLEM SOLUTION
Reconnect the wireless USB adapter 11N to your computer’s
USB.
The adapter does not -Make sure that your PC has a free IRQ (Interrupt ReQuest)
work properly. (interrupted request) (a hardware interrupted in a PC).
- Make sure that you have inserted the correct adapter and
install the appropriate disk. If the adapter is not working
after trying the above steps, remove the adapter and do the
following:
You can not -Make sure that all related devices are switched on.
communicate with other
computers linked in the -Make sure that your adapter is configured on the same
infrastructure channel and the same security options as with the other
configuration. computers in the configuration of the infrastructure.
13
-Check that LED indicators to the broadband MODEM are
indicating normal activity. If there is a problem with band
connection broadband.
14
6. SPECIFICATIONS
IEEE 802.11n (draft 2.0); IEEE 802.11g;
Standards:
IEEE 802.11b; CSMA/CA with ACK
OFDM/CCK/16-QAM/64-QAM/BPSK/QPSR/
Modulation type:
DQPSR/DBPSK
15
Antenna type: Internal omni-directional antennas
16
Product: 300 Mbps wireless USB 2.0 adapter
Part number: COM-843
Brand: Steren
WARRANTY
This Steren product is warranted under normal usage against defects in workmanship
and materials to the original purchaser for one year from the date of purchase.
CONDITIONS
1. This warranty card with all the required information, invoice, product box or
package, and product, must be presented when warranty service is required.
2. If the product is in the warranty time, the company will repair it free of charge.
3. The repairing time will not exceed 30 natural days, from the day the claim was
received.
4. Steren sell parts, components, consumables and accessories to customer, as well
as warranty service, at any of the addresses mentioned later.
If the product has been damaged by an accident, acts of God, mishandling, leaky
batteries, failure to follow enclosed instructions, improper repair by unauthorized
personnel, improper safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase
ticket.
RETAILER INFORMATION
Name of the retailer In case your product fails
Address or have questions, please
Product contact your nearest dealer.
Brand If you are in Mexico, please
Part number call to our Call Center.
Serial number 01 800 500 9000
Date of delivery
17