Nature">
522 GPMR72
522 GPMR72
522 GPMR72
1. SERVICIO MANUAL
Sí durante 30 seg. no se pulsa “START” se desactiva “GPMR 72”, quedando sin consumo
la batería. Solamente se permite una orden de arranque. Para repetir arranque se deberá pulsar
“OFF” y de nuevo “ON”
Retirada orden de arranque:
Se produce al detectar las señales de “Presión de aceite” y “Carga de batería”. Caso de
disponer de una sola de ellas “GPMR 72” funcionará igualmente.
Conexión contactor de generador:
Con señal de motor en marcha y una vez transcurridos 10 seg., ordena conexión de contactor de
generador
Orden de parada durante 20 seg., y una vez transcurridos estos se desactiva
el equipo. (queda sin consumo de batería) se apaga el led
OFF Si no se ha ordenado arranque desactiva “GPMR 72”
2. SERVICIO AUTOMATICO
Al puentear las bornas 9 y 10 se activa el equipo y se ilumina el led GPMR 72 ordena
arranque (hasta tres intentos de arranque con pausa).
Al abrirse las bornas 9 y 10 y después de un minuto de marcha en vacío, manda parar (20 seg.)
Transcurridos 20 seg., de parada “GPMR 72” queda desactivado.(sin consumo de batería).
Se apaga el led
PULSAR
ESQUEMA DE CONEXIONES
CARACTERISTICAS TECNICAS
R1
R2
S5
S6
E1
E5
S4
S3
S2
S1
E2
Contacto
O. CONEX. CONT. GRUPO
PARADA ELECTROVAL.
Arranque
PARADA EMERGENCIA
ALARMA ALTA TEMP. AGUA
PARADA ELCTRIMAN
ALARMA BAJA Pr. ACEITE
CONTACTO (+Vcc)
Electroválvula de parada
BATERIA (+Vcc)
BATERIA (-Vcc)
Electroimán de parada
ARRANQUE / PARO
ARRANQUE
potencial).
1. MANUAL OPERATION
PRESS
GPM-R 72
CONNECTION DIAGRAM
E3
E4
R1
R2
S5
S6
E1
E5
S4
S3
S2
S1
E2
+
TECHNICAL DETAILS
O. CONEX. CONT. GRUPO
PARADA ELECTROVAL.
PARADA EMERGENCIA
ALARMA ALTA TEMP. AGUA
PARADA ELCTRIMAN
ALARMA BAJA Pr. ACEITE
CONTACTO (+Vcc)
ARRANQUE / PARO
ARRANQUE
Contact
Start
+
Electrically operated valve for stop 230V 50/60Hz
Electro-magnet for stop TESION GENERADOR
BATERIA
+
TAKE CARE! SINCE THE BATTERY CHARGER
GENERATORS, WHEN THE BATTERY IS DISCONNECTED
WHILE THE UNIT IS RUNNING, GENERATE BETWEEN 50 AND
200 VOLTS (WHICH WILL DESTROY ELECTRONICS),
ABSOLUTELY NO OPERATIONS MUST TAKE PLACE ON THE
CONNECTIONS WHILE THE UNIT IS RUNNING.
Si durant 30 sec on n’appuie pas sur “START”, “GPMR ” se désactive et la batterie reste sans
consommation. Seul un ordre de démarrage est permis. Pour répéter le démarrage il faudra appuyer
sur “OFF” et à nouveau sur “ON”.
La led s’éteint.
APPUYER
CARACTÉRISTIQUES TECHNIQUES
Fax: 34 - 94 620 33 34
www.abamotor.com