With the recent development of non-fullerene acceptors, power conversion efficiencies of bulk-heterojunction organic solar cells have exceeded 18%. The morphology of the BHJ active layer, including packing, ordering, orientation, and phase behavior of the donor(s) and acceptor(s), plays critical roles in determining the device performance. We characterized the morphology of active layers consisting of mixtures of a PTB7/PTB7-Th (donor) and ITIC (acceptor) using grazing incidence wide-angle X-ray scattering, resonant soft X-ray scattering, and solid-state nuclear magnetic resonance (ssNMR) to correlate the morphology with device performance. PTB7-Th/ITIC shows a better device performance than that of PTB7/ITIC due to a smaller π-πstacking distance and smaller domain size of the phase separated morphology. One of PTB7/ITIC samples, processed from mixed solvents (chlorobenzene/benzene = 1:1 by volume), shows a possible partial miscibility and smaller domain size as revealed by ssNMR T1ρ relaxation times, which is detrimental to device performance. ssNMR results showed that ITIC could crystallize into different forms depending on processing conditions, which may have implications on the manufacturing of devices using it as an ingredient, as well as its long-term stability in service.

Three fused-ring electron acceptors (FXIC-1, FXIC-2, and FXIC-3) were designed and synthesized. This FXIC series has similar electron-rich central units and the same electron-poor termini. Due to the different steric structures of fluorene, bifluorenylidene, and spirobifluorene, FXIC-1 is a one-dimensional (1D) crystal, while FXIC-2 and FXIC-3 are multidimensional (MD) amorphous materials. The conformations of the FXIC series have a slight impact on their absorption and energy levels. FXIC-1 has higher electron mobility than FXIC-2 and FXIC-3. When blending with different polymer donors (PTB7-Th, J71, and PM7), the FXIC-1-based organic solar cells have efficiencies higher than those of the FXIC-2/FXIC-3-based cells. Meanwhile, the ternary-blend cells based on PTB7-Th:F8IC with FXIC-1, FXIC-2, and FXIC-3 show similar efficiencies, which are all better than those of the binary-blend devices.

The unidirectional extension of a smaller fused-ring system into a larger one in a single direction will increase the conjugation length, allowing a fine-tuning of electronic properties. Here, we designed and synthesized a unidirectionally extended fused-8-ring-based nonfullerene acceptor, AOIC, and a bidirectionally extended fused-11-ring electron acceptor, IUIC2, and compared these with the parent fused-5-ring electron acceptor, F5IC. They share the same electron-accepting groups and alkylphenyl side chains but have different fused-ring electron-donating units. Core extension from 5 to 11 rings up-shifts the energy levels, red shifts the absorption spectra, and reduces bandgaps. The unidirectionally extended AOIC has the highest mobility (2.1 × 10^-3 cm² V^-1 s^-1) relative to the parent F5IC (1.0 × 10^-3 cm² V^-1 s^-1) and the bidirectionally extended IUIC2 (4.7 × 10^-4 cm² V^-1 s^-1). Upon blending with the donor PTB7-Th, AOIC-based organic photovoltaic cells show an efficiency of 13.7%, much better than that of F5IC-based cells (5.61%) and IUIC2-based cells (4.48%).

We designed and synthesized a series of fused-ring electron acceptors (FREAs) based on naphthalene-fused octacyclic cores end-capped by 3-(1,1-dicyanomethylene)-5,6-difluoro-1- indanone (NOICs) using a bottom-up approach. The NOIC series shares the same end groups and side chains, as well as similar fused-ring cores. The butterfly effects, arising from different methoxy positions in the starting materials, impact the design of the final FREAs, as well as their molecular packing, optical and electronic properties, charge transport, film morphology, and performance of organic solar cells. The binary-blend devices based on this NOIC series show power conversion efficiencies varying from 7.15% to 14.1%, due to the different intrinsic properties of the NOIC series, morphologies of blend films, and voltage losses of devices.

The subplate is a transient brain structure which plays a key role in the maturation of the cerebral cortex. Altered brain growth and cortical development have been suggested in fetuses with complex congenital heart disease (CHD) in the third trimester. However, at an earlier gestation, the putative role of the subplate in altered brain development in CHD fetuses is poorly understood. This study aims to examine subplate growth (i.e., volume and thickness) and its relationship to cortical sulcal development in CHD fetuses compared with healthy fetuses by using 3D reconstructed fetal magnetic resonance imaging. We studied 260 fetuses, including 100 CHD fetuses (22.3-32 gestational weeks) and 160 healthy fetuses (19.6-31.9 gestational weeks). Compared with healthy fetuses, CHD fetuses had 1) decreased global and regional subplate volumes and 2) decreased subplate thickness in the right hemisphere overall, in frontal and temporal lobes, and insula. Compared with fetuses with two-ventricle CHD, those with single-ventricle CHD had reduced subplate volume and thickness in right occipital and temporal lobes. Finally, impaired subplate growth was associated with disturbances in cortical sulcal development in CHD fetuses. These findings suggested a potential mechanistic pathway and early biomarker for the third-trimester failure of brain development in fetuses with complex CHD.

Significance statement

Our findings provide an early biomarker for brain maturational failure in fetuses with congenital heart disease, which may guide the development of future prenatal interventions aimed at reducing neurological compromise of prenatal origin in this high-risk population.