Berg connector is a brand of electrical connector used in computer hardware. Berg connectors are manufactured by Berg Electronics Corporation of St. Louis, Missouri, now part of Amphenol.
Overview
editBerg connectors have a 2.54 mm (0.100 in) pitch, pins are 0.64 mm (0.025 in) square, and usually come as single or double row connectors.
Many types of Berg connectors exist. Some of the more familiar ones used in IBM PC compatibles are:
- the four-pin polarized Berg connectors used to connect 3½-inch floppy disk drive units to the power supply unit, usually referred to as simply a "floppy power connector", but often also referred to as LP4. This connector has a 2.50 mm (0.098 in) pitch (not 2.54 mm).
- the two-pin Berg connectors used to connect the front panel lights, turbo switch, and reset button to the motherboard.
- the two-pin Berg connectors used as jumpers for motherboard configuration.
Floppy drive power connector
edit|
| |||
| Type | Electrical | ||
|---|---|---|---|
| Production history | |||
| Designer | Berg Electronics Corporation | ||
| General specifications | |||
| Pins | 4 | ||
| Electrical | |||
| Signal | Yes | ||
| Pinout | |||
|
| |||
| Pin | Color | Type | |
| Pin 1 | Red | +5 V | |
| Pin 2 | Black | Ground | |
| Pin 3 | Black | Ground | |
| Pin 4 | Yellow | +12 V | |
The power connector on the 3½-inch floppy drive, informally known as "the Berg connector", is 2.50 mm pitch (distance from center to center of pins).
The power cable from the ATX power supply consists of 20 AWG wire to a 4-pin female connector.[1] The plastic connector housing is most often white, as shown (TE Connectivity / AMP 171822-4), but black is also common. Other colours are rarer. The part numbers used for the female contact pins depends on the detailed design, the surface coating (for example tinned or gold plated) and the form of supply. Example part numbers are any of TE Connectivity / AMP 170204-* (loose pieces) or 170262-* (pieces supplied in strips), where * is 1 or 2 or 4.[2][3]
The male PCB connector on the 3½-inch floppy drive is normally a polarized right-angle male header, which is a TE Connectivity / AMP 171826-4,[4] the straight model is AMP 171825-4.[5]
The shape of the connector housing makes it very easy to determine the pin number allocations by visual inspection.
Company history
editIn 1998, Berg Electronics was acquired by FCI (Framatome Connectors International) for $1.85 billion.[6] In 2016, FCI Asia Pte was acquired by Amphenol.[7]
See also
editReferences
edit- ^ "ATX12V Power Supply Design Guide, v2.31 (Power Supply Design Guide for Desktop Platform Form Factors, v1.2)" (PDF). Archived from the original (PDF) on 2016-04-14. Retrieved 2016-12-25.
- ^ AMP 171822-4 Female Housing; TE Connectivity.
- ^ AMP 170204-1 Female Contact Pin for AWG 20-26 wire; TE Connectivity.
- ^ AMP 171826-4 Right-Angle Male Connector; TE Connectivity.
- ^ AMP 171825-4 Straight Male Connector; TE Connectivity.
- ^ Framatome To Acquire Berg In Connector Deal; Berg Electronics; August 28, 1998.
- ^ Amphenol Corporation Completes the Acquisition of FCI Asia Pte Ltd; Business Wire; January 08, 2016.