Nothing Special   »   [go: up one dir, main page]
Wikipedia

Steelmaking

Steelmaking is the process of producing steel from iron ore and/or scrap. Steel has been made for millennia, and was commercialized on a massive scale in the 1850s and 1860s, using the Bessemer and Siemens-Martin processes.

Steel mill with two arc furnaces

Two major commercial processes are used. Basic oxygen steelmaking uses liquid pig-iron from a blast furnace and scrap steel as the main feed materials. Electric arc furnace (EAF) steelmaking uses scrap steel or direct reduced iron (DRI). Oxygen steelmaking has become more popular over time.[1]

Steelmaking is one of the most carbon emission-intensive industries. As of 2020, steelmaking was responsible for about 10% of greenhouse gas emissions.[2] The industry is seeking significant emission reductions.[3]

Steel

edit

Steel is made from iron and carbon. Cast iron is a hard, brittle material that is difficult to work, whereas steel is malleable, relatively easily formed and versatile. On its own, iron is not strong, but a low concentration of carbon – less than 1 percent, depending on the kind of steel – gives steel strength and other important properties. Impurities such as nitrogen, silicon, phosphorus, sulfur, and excess carbon (the most important impurity) are removed, and alloying elements such as manganese, nickel, chromium, carbon, and vanadium are added to produce different grades of steel.

History

edit
 
Bethlehem Steel in Bethlehem, Pennsylvania, was one of the world's largest manufacturers of steel before its 2003 closure.
Main article: Ferrous metallurgy

Early history

edit

Early processes evolved during the classical era in China, India, and Rome. The earliest means of producing steel was in a bloomery.

For much of human history, steel was made only in small quantities. Early modern methods of producing steel were often labor-intensive and highly skilled arts. The Bessemer process and subsequent developments allowed steel to become integral to the global economy.[4]

China

edit

A system akin to the Bessemer process originated in the 11th century in East Asia.[5][6] Hartwell wrote that the Song dynasty (960–1279 CE) innovated a "partial decarbonization" method of repeated forging of cast iron under a cold blast.[7] Needham and Wertime described the method as a predecessor to the Bessemer process.[5][8][9] This process was first described government official Shen Kuo (1031–1095) in 1075, when he visited Cizhou.[7] Hartwell stated that the earliest center where this was practiced was perhaps the great iron-production district along the Henan–Hebei border during the 11th century.[7]

Europe

edit
 
Johan Albrecht de Mandelslo described the Japanese use of the Bessemer process.[10]

In the 15th century, the finery process, which shares the air-blowing principle with the Bessemer process, was developed in Europe.

High-quality steel was also made by the reverse process of adding carbon to carbon-free wrought iron, usually imported from Sweden. The manufacturing process, called the cementation process, consisted of heating bars of wrought iron together with charcoal for periods of up to a week in a long stone box. This produced blister steel. The blister steel was put in a crucible with wrought iron and melted, producing crucible steel. Up to 3 tons of (then expensive) coke was burnt for each ton of steel produced. When rolled into bars such steel was sold at £50 to £60 (approximately £3,390 to £4,070 in 2008)[11] a long ton. The most difficult and laborious part of the process was the production of wrought iron in finery forges in Sweden.

In 1740, Benjamin Huntsman developed the crucible technique for steel manufacture at his workshop in Handsworth, England. This process greatly improved the quantity and quality of steel production. It added three hours firing time and required large quantities of coke. In making crucible steel, the blister steel bars were broken into pieces and melted in small crucibles, each containing 20 kg or so. This produced higher quality metal, but increased the cost.

The Bessemer process reduced the time needed to make lower-grade steel to about half an hour while requiring only enough coke needed to melt the pig iron. The earliest Bessemer converters produced steel for £7 a long ton, although it initially sold for around £40 a ton.

Japan

edit

The Japanese may have made use of a Bessemer-type process, as observed by 17th century European travellers.[10] Adventurer Johan Albrecht de Mandelslo described the process in a book published in English in 1669. He wrote, "They have, among others, particular invention for the melting of iron, without the using of fire, casting it into a tun done about on the inside without about half a foot of earth, where they keep it with continual blowing, take it out by ladles full, to give it what form they please." Wagner stated that Mandelslo did not visit Japan, so his description of the process is likely derived from other accounts. Wagner stated that the Japanese process may have been similar to the Bessemer process, but cautions that alternative explanations are plausible.[10]

 
Bessemer converter at Högbo Bruk, Sandviken.

By the early 19th century the puddling process was widespread. At the time, process heat was too low to entirely remove slag impurities, but the reverberatory furnace made it possible to heat iron without placing it directly in the fire, offering some protection from impurities in the fuel source. Coal then began to replace charcoal as fuel.

The Bessemer process allowed steel to be produced without fuel, using the iron's impurities to create the necessary heat. This drastically reduced costs, but raw materials with the required characteristics were not always easy to find.[12]

Industrialization

edit

Modern steelmaking began at the end of the 1850s when the Bessemer process became the first successful method of steelmaking in high quantity, followed by the open-hearth furnace.

Processes

edit
 
Distribution of world steel production by methods

Modern steelmaking consists of three steps: primary, secondary, and tertiary.

Primary steelmaking involves smelting iron into steel. Secondary steelmaking involves adding or removing other elements such as alloying agents and dissolved gases. Tertiary steelmaking casts molten metal into sheets, rolls or other forms. Multiple techniques are available for each step.[13]

Primary step

edit
Main articles: Basic oxygen steelmaking and Electric arc furnace

Basic oxygen

edit

Basic oxygen steelmaking (BOS)involves melting carbon-rich pig iron and converting it into steel. Blowing oxygen through molten pig iron oxidizes some of the carbon into CO−
 and CO
2, turning the iron into steel. Refractories (materials resistant to decomposition under high temperatures)—calcium oxide and magnesium oxide—line the smelting vessel to withstand the heat, corrosive molten metal, and slag. The chemistry is controlled to remove impurities such as silicon and phosphorus.

The basic oxygen process was developed in 1948 by Robert Durrer, as a refinement of the Bessemer converter that replaced air with (more efficient) pure oxygen. It reduced plant capital costs and smelting time, and increased labor productivity. Between 1920 and 2000, labour requirements decreased by a factor of 1000, to 3 man-hours per thousand tonnes.[citation needed] In 2013, 70% of global steel output came from the basic oxygen furnace.[14] Furnaces can convert up to 350 tons of iron into steel in less than 40 minutes, compared to 10–12 hours in an open hearth furnace.[15]

Electric arc

edit

Electric arc furnaces make steel from scrap or direct reduced iron. A "heat" (batch) of iron is loaded into the furnace, sometimes with a "hot heel" (molten steel from a previous heat). Gas burners may assist with the melt. As in BOS, fluxes are added to protect the vessel lining and help impurity removal. The furnaces are typically 100 tonne-capacity that produce steel every 40 to 50 minutes.[15] This process allows larger alloy additions than the basic oxygen method.[16]

HIsarna

edit
Main article: HIsarna ironmaking process

In HIsarna ironmaking, iron ore is processed almost directly into liquid iron or hot metal. The process is based around a cyclone converter blast furnace, which makes it possible to skip making the BOS-required pig iron pellets. Skipping this preparatory step makes the HIsarna process more energy-efficient and lowers the carbon footprint.[citation needed]

Hydrogen reduction

edit

Direct-reduced iron can be produced from iron ore as it reacts with atomic hydrogen. Renewable hydrogen allows steelmaking without fossil fuels. Direct reduction occurs at 1,500 °F (820 °C). The iron is infused with carbon (from coal) in an electric arc furnace. Hydrogen electrolysis requires approximately 2600 kWh per ton of steel. Hydrogen production raises costs by an estimated 20–30% over conventional methods.[17][18][19]

Second step

edit

The next step commonly uses ladles. Ladle operations include de-oxidation (or "killing"), vacuum degassing, alloy addition, inclusion removal, inclusion chemistry modification, de-sulphurisation, and homogenisation. It is common to perform ladle operations in gas-stirred ladles with electric arc heating in the furnace lid. Tight control of ladle metallurgy produces high grades of steel with narrow tolerances.[13]

Tertiary step

edit

Carbon dioxide emissions

edit

As of 2021, steelmaking was estimated to be responsible for around 11% of global CO
2 emissions and around 7% of greenhouse gas emissions.[20][21] Making 1 ton of steel emits about 1.8 tons of CO
2.[22] The bulk of these emissions are from the industrial process in which coal provides the carbon that binds with the oxygen from the iron ore in a blast furnace in:[23]

Additional CO
2 emissions result from mining, refining and shipping ore, basic oxygen steelmaking, calcination, and the hot blast. Proposed techniques to reduce CO
2 emissions in the steel industry include reduction of iron ore using green hydrogen rather than carbon, and carbon capture and storage.[24]

Mining and extraction

edit

Coal and iron ore mining are energy intensive, and damage their surroundings, leaving pollution, biodiversity loss, deforestation, and greenhouse gas emissions behind.

Blast furnace

edit
Main article: Blast furnace

Blast furnaces remove oxygen and trace elements from iron and add a tiny amount of carbon by melting the iron ore at 1,700 °C (3,090 °F) in the presence of ambient oxygen and coke (a type of coal). The oxygen from the ore is carried away by the carbon from the coke in the form of CO
2. The reaction:

Fe
2O
3(s) + 3 CO(g) → 2 Fe(s) + 3 CO
2(g)

The reaction occurs due to the lower (favorable) energy state of CO
2 compared to iron oxide, and the high temperatures are needed to achieve the reaction's activation energy. A small amount of carbon bonds with the iron, forming pig iron, which is an intermediary before steel, as its carbon content is too high – around 4%.[25]

Decarburization

edit
Main articles: Decarburization and Basic oxygen steelmaking

To reduce the carbon content in pig iron and obtain the desired carbon content of steel, it is re-melted and oxygen is blown through in basic oxygen steelmaking. In this step, the oxygen binds with the undesired carbon, carrying it away in the form of CO
2 gas, an additional emission source. After this step, the carbon content in the pig iron is lowered sufficiently to obtain steel.

Calcination

edit
Main articles: Calcination and Slag

Further CO
2 emissions result from the use of limestone, which is melted at high temperatures in a reaction called calcination, according to:

CaCO
3(s) → CaO(s) + CO
2(g)

The resulting CO
2 is an additional source of emissions. Calcium oxide (CaO, quicklime) can be used as a replacement to reduce emissions.[26] It acts as a chemical flux, removing impurities (such as sulfur or phosphorus (e.g. apatite or fluorapatite)[27]) in the form of slag and lowers CO
2 emissions according to reactions such as:

SiO2 + CaO → CaSiO3

This use of limestone to provide a flux occurs both in the blast furnace (to obtain pig iron) and in the basic oxygen steel making (to obtain steel).

Hot blast

edit
Main article: Hot blast

CO
2 emissions result from the hot blast, which increases blast furnace temperatures. The hot blast pumps hot air into the blast furnace. The hot blast temperature ranges from 900 to 1,300 °C (1,650 to 2,370 °F) depending on the design and condition. Oil, tar, natural gas, powdered coal and oxygen can be injected to combine with the coke to release additional energy and increase the percentage of reducing gases present, increasing productivity. Hot blast air is typically heated by burning fossil fuels, an additional emission source.[28]

Strategies for reducing carbon emissions

edit

The steel industry produces 7-8% of anthropogenic CO
2 emissions and is one of the most energy-intensive industries.[29][30] Emissions abatement and decarbonization strategies vary by manufacturing process. Options fall into three general categories: using a non-fossil energy source; increasing processing efficiency; and evolving the manufacturing process. They may be used individually or in combination.[citation needed]

"Green steel" describes steelmaking without fossil fuels.[31] Some companies that claim to produce green steel reduce, but do not eliminate, emissions.[32]

Australia

edit

Australia produces nearly 40% of the world's iron ore. The Australian Renewable Energy Agency (ARENA) is funding research projects involving direct reduced ironmaking (DRI) to reduce emissions. Companies such as Rio Tinto, BHP, and BlueScope are developing green steel projects.[33]

Europe

edit

European projects from HYBRIT, LKAB, Voestalpine, and ThyssenKrupp are pursuing strategies to reduce emissions.[34] HYBRIT claims to produce green steel.[32]

Top gas recovery in BF/BOF

edit

Top gas from the blast furnace is normally expelled into the air. This gas contains CO
2, H2, and CO. The top gas can be captured, the CO
2 removed, and the reducing agents reinjected into the blast furnace.[citation needed] A 2012 study suggested that this process can reduce blast furnace CO
2 emissions by 75%,[35] while a 2017 study showed that emissions are reduced by 56.5% with carbon capture and storage, and reduced by 26.2% if only the recycling of the reducing agents is used.[36] To keep the carbon captured from entering the atmosphere, a method of storing it or using it would have to be found.

Another way to use the top gas is in a top recovery turbine which generates electricity, which thereby reduces external energy needs if electric arc smelting is used.[34] Carbon could also be captured from coke oven gases. As of 2022, separating the CO2 from other gases and components in the system, and the high cost of the equipment and infrastructure changes needed, have prevented adoption, but the emission reduction potential has been estimated to be up to 65% to 80%.[37][34]

Hydrogen direct reduction

edit

Hydrogen direct reduction (HDR) using hydrogen produced from emission-free power (green hydrogen) offers emission-free iron-making, because water is the only by-product of the reaction between iron oxide and hydrogen.[38]

As of 2021, ArcelorMittal, Voestalpine, and TATA had committed to using green hydrogen to smelt iron.[39] In 2024 the HYBRIT project in Sweden was using HDR.[40]

For the European Union, it is estimated that the hydrogen demand for HDR would require 180 GW of renewable capacity.[41]

Iron ore electrolysis

edit

Another developing possible technology is iron ore electrolysis, where the reducing agent is electrons.[34] One method is molten oxide electrolysis. The cell consists of an inert anode, a liquid oxide electrolyte (CaO, MgO, etc.), and molten ore. When heated to ~1.600 °C, the ore is reduced to iron and oxygen. As of 2022 Boston Metal was at the semi-industrial stage for this process, with plans to commercialize by 2026.[42][43]

The Siderwin research project involved Arcelormittal was testing a different type of electrolysis.[44] It operates at around 110 °C.[45]

Scrap-use in BF/BOF

edit

Scrap steelmaking refers to steel that has either reached its end-of-life use, or is excess metal from the manufacture of steel components. Steel is easy to separate and recycle due to its magnetism. Using scrap avoids the emissions of 1.5 tons of CO
2 for every ton.[46] As of 2023, steel had one of the highest recycling rates of any material, with around 30% of the world's steel coming from recycled components. However, steel cannot be recycled endlessly,[clarification needed] and the recycling processes, using arc furnaces, use electricity.[29]

H2 enrichment in BF/BOF

edit

In a blast furnace, iron oxides are reduced by a combination of CO, H2, and carbon. Only around 10% of the iron oxides are reduced by H2. With H2 enrichment, the proportion of iron oxides reduced by H2 is increased, consuming less carbon is consumed and emitting less CO
2.[47] This process can reduce emissions by an estimated 20%.[citation needed]

Other strategies

edit

The HIsarna ironmaking process is a way of producing iron in a cyclone converter furnace without the pre-processing steps of choking/agglomeration, which reduces the CO
2 emissions by around 20%.[48]

One speculative idea is a project by SuSteel to develop a hydrogen plasma technology that reduces the ore with hydrogen at high operating temperatures.[34]

Biomass such as charcoal or wood pellets are a potential alternative blast furnace fuel, that does not involve fossil fuels, but still emits carbon. Emissions are reduced by 5% to 28%.[34]

See also

edit

References

edit
  1. ^ Turkdogan, E.T. (1996). Fundamentals of Steelmaking. London: Institute of Materials. ISBN 9781907625732. OCLC 701103539.
  2. ^ Pooler, Michael (11 November 2020). "Europe leads the way in the 'greening' of steel output". Financial Times. Archived from the original on 2022-12-10. Retrieved 2020-11-20.
  3. ^ "Decarbonization in steel". McKinsey. Retrieved 2021-04-03.
  4. ^ Sass, Stephen L. (August 2011). The Substance of Civilization: Materials and Human History from the Stone Age to the Age of Silicon. New York City: Arcade Publishing. ISBN 9781611454017. OCLC 1078198918.
  5. ^ a b Needham, Joseph (2008). Science and civilisation in China, Volume 5, Part 7 (1. publ. ed.). Cambridge, UK: Cambridge University Press. pp. 261–5. ISBN 9780521875660.
  6. ^ Tanner, Harold (2009). China: A History. Hackett Publishing. p. 218. ISBN 978-0-87220-915-2.
  7. ^ a b c Hartwell, Robert (March 1966). "Markets, Technology, and the Structure of Enterprise in the Development of the Eleventh-Century Chinese Iron and Steel Industry". The Journal of Economic History. 26 (1): 54. doi:10.1017/S0022050700061842. ISSN 0022-0507. JSTOR 2116001. S2CID 154556274.
  8. ^ Wertime, Theodore A. (1962). The coming of the age of steel. University of Chicago Press.
  9. ^ Temple, Robert K.G. (1999). The Genius of China: 3000 years of science, discovery and invention. London: Prion. p. 49. ISBN 9781853752926.
  10. ^ a b c Wagner, Donald (2008). Science and Civilisation in China: Vol. 5, Part 11: Ferrous Metallurgy. Cambridge University Press. pp. 363–5. ISBN 978-0-521-87566-0.
  11. ^ "Purchasing Power of British Pounds from 1264 to Present". 2009. Retrieved 14 January 2011.
  12. ^ Peter Temin (1963). "The Composition of Iron and Steel Products, 1869–1909". The Journal of Economic History. 23 (4): 447–471. doi:10.1017/S0022050700109179. JSTOR 2116209. S2CID 154397900.
  13. ^ a b Ghosh, Ahindra. (December 13, 2000). Secondary Steelmaking: Principles and Applications (1st ed.). Boca Raton, Fla.: CRC Press. ISBN 9780849302640. LCCN 00060865. OCLC 664116613.
  14. ^ Remaking the global steel industry (PDF), Deloitte, June 2013
  15. ^ a b Fruehan, Richard J., ed. (1998). The Making, Shaping and Treating of Steel: Steelmaking and Refining Volume (11th ed.). Pittsburgh: AIST. ISBN 978-0-930767-02-0. LCCN 98073477. OCLC 906879016.
  16. ^ "Steel – Electric-arc steelmaking | Britannica".
  17. ^ "HYBRIT: The world's first fossil-free steel ready for delivery". vattenfall.com. Vattenfall. 2021-08-18. Retrieved 2021-08-21.
  18. ^ Pei, Martin; Petäjäniemi, Markus (2020-07-18). "Toward a Fossil Free Future with HYBRIT: Development of Iron and Steelmaking Technology in Sweden and Finland". Metals. 10 (7): 972. doi:10.3390/met10070972.
  19. ^ Hutson, Matthew (2021-09-18). "The Promise of Carbon-Neutral Steel". The New Yorker. Retrieved 2021-09-20.
  20. ^ Rossi, Marcello (2022-08-04). "The Race to Remake the $2.5 Trillion Steel Industry With Green Steel". Singularity Hub. Retrieved 2022-08-06.
  21. ^ "Global Steel Industry's GHG Emissions". Global Efficiency Intelligence. 6 January 2021. Retrieved 2022-08-06.
  22. ^ "Direct CO2 intensity of the iron and steel sector in the Net Zero Scenario, 2010–2030 – Charts – Data & Statistics". IEA.
  23. ^ "Blast Furnace". Science Aid. Archived from the original on 17 December 2007. Retrieved 2007-12-30.
  24. ^ De Ras, Kevin; Van De Vijver, Ruben; Galvita, Vladimir V.; Marin, Guy B.; Van Geem, Kevin M. (2019-12-01). "Carbon capture and utilization in the steel industry: challenges and opportunities for chemical engineering". Current Opinion in Chemical Engineering. 26: 81–87. doi:10.1016/j.coche.2019.09.001. hdl:1854/LU-8635595. ISSN 2211-3398. S2CID 210619173.
  25. ^ Camp, James McIntyre; Francis, Charles Blaine (1920). The Making, Shaping and Treating of Steel (2nd ed.). Pittsburgh: Carnegie Steel Co. pp. 174. OCLC 2566055.
  26. ^ Vola, G; Sarandrea, L; Mazzieri, M; Bresciani, P; Ardit, M; Cruciani, G (2019). "Reactivity and overburning tendency of quicklime burnt at high temperature" (PDF). Italy.
  27. ^ Pereira, Antônio Clareti; Papini, Rísia Magriotis (September 2015). "Processes for phosphorus removal from iron ore – a review". Rem: Revista Escola de Minas. 68 (3): 331–335. doi:10.1590/0370-44672014680202. ISSN 0370-4467.
  28. ^ American Iron and Steel Institute (2005). How a Blast Furnace Works. steel.org.
  29. ^ a b Allen, Jessica; Honeyands, Tom (17 November 2023). "'Green steel' is hailed as the next big thing in Australian industry. Here's what the hype is all about". The Conversation. Retrieved 23 April 2024.
  30. ^ "Green steel: a material ready for industrial decarbonisation and widening the horizons of electrification". Iberdrola. 22 April 2021. Retrieved 23 April 2024.
  31. ^ "What is green steel and how can it help us reach net zero?". World Economic Forum. 11 July 2022. Retrieved 23 April 2024.
  32. ^ a b "Not all green steel is fossil-free steel – here is why – Fossil free steel". SSAB. 10 July 2023. Retrieved 23 April 2024.
  33. ^ Simmons, David (22 April 2024). "Research centre lands $6.2 million for green iron and steel". InDaily. Retrieved 23 April 2024.
  34. ^ a b c d e f European Parliament. Directorate General for Parliamentary Research Services. (2021). Carbon-free steel production: cost reduction options and usage of existing gas infrastructure. LU: Publications Office. doi:10.2861/01969. ISBN 978-92-846-7891-4.
  35. ^ Afanga, Khalid; Mirgaux, Olivier; Patisson, Fabrice (2012-02-07). "Assessment of Top Gas Recycling Blast Furnace: A Technology To Reduce CO2 Emissions in the Steelmaking Industry". Carbon Management Technology Conference. OnePetro. doi:10.7122/151137-MS.
  36. ^ Jin, Peng; Jiang, Zeyi; Bao, Cheng; Hao, Shiyu; Zhang, Xinxin (2017-02-01). "The energy consumption and carbon emission of the integrated steel mill with oxygen blast furnace". Resources, Conservation and Recycling. Resource Efficiency in Chinese Industry. 117: 58–65. doi:10.1016/j.resconrec.2015.07.008. ISSN 0921-3449.
  37. ^ "CCS: a necessary technology for decarbonising the steel sector". Global CCS Institute. Retrieved 2022-11-14.
  38. ^ "The Potential of hydrogen in decarbonising steel production" (PDF). European parliament.
  39. ^ Zhou, Tuyu; Gosens, Jorrit; Xu, Hongzhang; Jotzo, Frank (2 Aug 2022). "China's green steel plans: Near-term policy challenges & Australia-China links indecarbonisation" (PDF). ANU Crawford School of Public Policy, with National Foundation for Australia-China Relations. p. 4–5.
  40. ^ "Hybrit". Home. 31 August 2023. Retrieved 23 April 2024.
  41. ^ "How To Decarbonize The Steel Sector". Renewable Reads. December 2023. Retrieved December 13, 2023.
  42. ^ "Transforming Metal Production". Boston Metal. Retrieved 2022-11-14.
  43. ^ Ed Davey (January 26, 2023). "Boston Metal gets $120 million boost to make 'green steel'". The Associated Press.
  44. ^ "Siderwin". Retrieved 2023-09-18.
  45. ^ Böck, Hanno (2023-03-24). "Making Steel with Electricity". Industry Decarbonization Newsletter. Retrieved 2023-09-18.
  46. ^ "Fact sheet: Scrap use in the steel industry" (PDF). Wordsteel. 2021. Retrieved November 14, 2022.
  47. ^ Lan, Chenchen; Hao, Yuejun; Shao, Jiannan; Zhang, Shuhui; Liu, Ran; Lyu, Qing (November 2022). "Effect of H2 on Blast Furnace Ironmaking: A Review". Metals. 12 (11): 1864. doi:10.3390/met12111864. ISSN 2075-4701.
  48. ^ "HISARNA: Building a sustainable steel industry" (PDF). Tata Steel. February 2022. Retrieved November 14, 2022.
edit
Retrieved from "https://en.wikipedia.org/w/index.php?title=Steelmaking&oldid=1263711699"