Metaballs

This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these messages) This article includes a list of general references, but it lacks sufficient corresponding inline citations. Please help to improve this article by introducing more precise citations. (August 2014) (Learn how and when to remove this message) This article provides insufficient context for those unfamiliar with the subject. Please help improve the article by providing more context for the reader. (November 2016) (Learn how and when to remove this message) This article's lead section may be too short to adequately summarize the key points. Please consider expanding the lead to provide an accessible overview of all important aspects of the article. (June 2019) (Learn how and when to remove this message)

In computer graphics, metaballs, also known as blobby objects,^[1][2] are organic-looking n-dimensional isosurfaces, characterised by their ability to meld together when in close proximity to create single, contiguous objects.

In solid modelling, polygon meshes are commonly used. In certain instances, however, metaballs are superior. A metaball's "blobby" appearance makes them versatile tools, often used to model organic objects and also to create base meshes for sculpting.^[3]

The technique for rendering metaballs was invented by Jim Blinn in the early 1980s to model atom interactions for Carl Sagan's 1980 TV series Cosmos.^[4] It is also referred to colloquially as the "jelly effect" in the motion and UX design community,^[5] commonly appearing in UI elements such as navigations and buttons. Metaball behavior corresponds to mitosis in cell biology, where chromosomes generate identical copies of themselves through cell division.

Each metaball is defined as a function in n dimensions (e.g., for three dimensions, ${\displaystyle f(x,y,z)}$; three-dimensional metaballs tend to be most common, with two-dimensional implementations popular as well). A thresholding value is also chosen, to define a solid volume. Then,

$${\displaystyle \sum _{i}{\mbox{metaball}}_{i}(x,y,z)\leq {\mbox{threshold}}}$$

determines whether the volume enclosed by the surface defined by the metaballs is filled at ${\displaystyle (x,y,z)}$ or not.

A more Informal definition could be, That if you take 2 circles in 2D, and at point P, circle 1's influence(1/distance) is X and circle 2's influence is Y.

If X+Y>threshold. point P is part of Metaball.. And then you calculate it for all Points, obviously there are Graphing techniques to do that. Interactive Metaball with Neat Function

This section is in list format but may read better as prose. You can help by converting this section, if appropriate. Editing help is available. (June 2019)

A typical function chosen for metaballs is the inverse-square law, that is, the contribution to the thresholding function falls off in a bell-shaped curve as the distance from the centre of the metaball increases.

For the three-dimensional case,

${\displaystyle f(x,y,z)=1/{\sqrt {(x-x_{0})^{2}+(y-y_{0})^{2}+(z-z_{0})^{2}}}}$

where ${\displaystyle (x_{0},y_{0},z_{0})}$ is the center of the metaball. The fast inverse square root technique may be used in this calculation.

Various other falloff functions have historically been used for reasons of computational efficiency. Desirable properties of the function include:

• Finite support. A function with finite support goes to zero at a maximum radius. When evaluating the metaball field, any points beyond their maximum radius from the sample point can be ignored. Nearest neighbor search can ensure only adjacent metaballs need to be evaluated regardless of the total number in the field.
• Smoothness. Because the isosurface is the result of adding the fields together, its smoothness is dependent on the smoothness of the falloff curves.

More complicated models use a Gaussian potential constrained to a finite radius or a mixture of polynomials to achieve smoothness. The Soft Object model by the Wyvill brothers provides higher degree of smoothness.^{[citation needed]}

A simple generalization of metaballs is to apply the falloff curve to distance-from-lines or distance-from-surfaces.

There are a number of ways to render the metaballs to the screen. In the case of three dimensional metaballs, the two most common are brute force raycasting and the marching cubes algorithm.

2D metaballs were a very common demo effect in the 1990s. The effect is also available as an XScreensaver module.

• NURBS
• Bézier surface

• Blinn, J. F. (July 1982). "A Generalization of Algebraic Surface Drawing". ACM Transactions on Graphics. 1 (3): 235–256. doi:10.1145/357306.357310. S2CID 24838292.

• Implicit Surfaces article by Paul Bourke
• Meta Objects article from Blender wiki
• Metaballs article from SIGGRAPH website
• "Exploring Metaballs and Isosurfaces in 2D", 3 September 2008, Stephen Whitmore, gamedev.net