The rapid evolution of passive optical network (PON) technologies has been driven by the necessity to accommodate 5th-generation system requirements. This research introduces a PON wavelength division multiplexing-based optical transmitter that is ...

Transverse dynamics of a broad-area semiconductor surface-emitting laser with a vertical resonator (VCSEL) with еxternal optical injection was investigated above threshold. It is obtained that two types of instabilities can develop in system: ...

Wavelength division multiplexing (WDM) technique plays a vital role in optical fiber communication. In this paper, a 4 × 1 WDM system has been developed with Vertical Cavity Surface Emitting LASER as optical source for each input. The performance ...

This paper presents numerical modeling on the noise properties and signal distortion associated with millimeter-frequency modulation of vertical-cavity surface-emitting laser VCSEL under with a transverse-coupled cavity. The study is based on a time-...

This paper describes the design of a high speed semiconductor laser diode driver for driving 0.5 to 2mW diodes at full optical power modulation up to 50MHz for use in a quantum random number generator. The output current is in a hyperbolic time-...

Flat wideband chaos has been experimentally demonstrated using low-cost components, VCSEL and a semiconductor optical amplifier in fibre ring resonator. The bandwidth is about 3 times greater than that achieved without the fibre ring resonator.

Two types of polarization switching (PS): simple (with two minima) and double PS, are found injecting to the suppressed linear polarization and to the linear polarization of the solitary VCSEL respectively, under orthogonal optical injection.

In the present paper, the performance characteristics of high speed laser diodes (based on vertical cavity surface emitting laser (VCSEL) are deeply and parametrically investigated under thermal-irradiated operating conditions. The processed ...

We present the design parameter variations of multi quantum wells (MQW) in the active region of an InP-based vertical-cavity surface emitting laser (VCSEL) utilizing an air-post design. The MQW and barrier thickness were varied and their effect on the ...

In this paper, using a rigorous quasi 3-D electro-opto-thermal numerical model, we simulate the effect of gain-cavity offset on different performance characteristics of a gain-guided vertical-cavity surface-emitting laser (VCSEL). For the first time, we ...

In this work, the simulation of the single-mode stability in vertical-cavity surface-emitting lasers (VCSELs) is presented using a microscopic electro-opto-thermal model. Experimental data for oxide-confined VCSELs emitting at 850 nm with ...

The integration of thousands of optical input/output (I/O) devices and large electronic crossbar switching elements onto a single optoelectronic integrated circuit (IC) can place stringent power demands on the CMOS substrates. Currently, there is no ...

An ultra dense optical interconnection network is proposed for massively parallel processors. Using two dimensional arrays of beam steering vertical cavity surface emitting lasers (VCSEL) as space division switching elements, a single chip, free space ...