Nothing Special   »   [go: up one dir, main page]

skip to main content
10.1145/3102113.3102137acmconferencesArticle/Chapter ViewAbstractPublication PageseicsConference Proceedingsconference-collections
demonstration

A virtual environment with haptic feedback for better distance estimation

Published: 26 June 2017 Publication History

Abstract

This demonstration will show how a small number of wearable tactors can improve the suitability of a multimodal system for engineering design. It is well reported in the scientific literature that depth perception in virtual reality is inaccurate, yet users of VR need a high-fidelity experience in several applications, including engineering, in this case so that decisions are made based on the true design intent. The tactors' vibration in this demonstration is reconfigurable to create various vibration effects, for example: frequency value ranging from 261.0 to 523.0Hz, delay (from 3830 to 1920 microseconds) and repeat effects. The avatar can be rescaled so that decision makers can experience the design from the perspective of different percentile users. We developed an integrated full-body and finger kinematics based on a combination of Microsoft Kinect and Leap Motion (LM). We explored the collider system and examined Oriented Bounding Box (OBB) and skin mesh-based colliders. We demonstrate the ways in which low-cost technologies can be appropriated to develop a wearable and usable system that offers improvements to engineering design.

References

[1]
Adhikarla, V. K., Sodnik, J., Szolgay, P., & Jakus, G. (2015). Exploring direct 3d interaction for full horizontal parallax light field displays using leap motion controller. Sensors, 15(4), 8642--8663.
[2]
Ahmad, A., & Al-Ahmari, A. 2012. Virtual Reality in Assembly Simulation. The 2012 international conference on Industry, Engineering and Management Systems (IEMS). Cocoa, FL.
[3]
Barghout, A., Cha, J., Saddik, A.E., Kammerl, J., & Steinbach, E. (2009). Spatial resolution of vibrotactile perception on the human forearm when exploiting funneling illusion. Haptic Audio visual Environments and Games: HAVE 2009. IEEE, 2009, pp. 19--23.
[4]
Brolin, E. (2016). Anthropometric diversity and consideration of human capabilities: Methods for virtual product and production development. Doctoral dissertation, Chalmers University of Technology.
[5]
Cohen, J. D., Lin, M. C., Manocha, D., & Ponamgi, M. (1995). I-collide: An interactive and exact collision detection system for large-scale environments. In Proceedings of the 1995 symposium on Interactive 3D graphics (pp. 189--196). ACM.
[6]
Gallace, A., Tan, H. Z., & Spence, C. (2005). Tactile change detection. In Proceedings of the First Joint Eurohaptics Conference and Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems, 2005. (pp. 12--16). IEEE.
[7]
Guna, J., Jakus, G., Pogačnik, M., Tomažič, S., & Sodnik, J. (2014). An analysis of the precision and reliability of the leap motion sensor and its suitability for static and dynamic tracking. Sensors, 14(2), 3702--3720.
[8]
Lawson, G., Roper, T., & Abdullah, C. (2016). Multimodal Sensory Illusions for Improving Spatial Awareness in Virtual Environments. In Proceedings of the European Conference on Cognitive Ergonomics. ACM.
[9]
Lawson, G., Salanitri, D., & Waterfield, B. (2016). Future directions for the development of virtual reality within an automotive manufacturer. Applied ergonomics, 53, 323--330.
[10]
Loomis, J. M., & Collins, C. C. (1978). Sensitivity to shifts of a point stimulus: An instance of tactile hyperacuity. Perception & Psychophysics, 24(6), 487--492.
[11]
Matscheko, M., Ferscha, A., Riener, A., & Lehner, M. (2010). Tactor placement in wrist worn wearables. In 2010 International Symposium on Wearable Computers (ISWC), (pp. 1--8). IEEE.
[12]
Matscheko, M., Ferscha, A., Riener, A., & Lehner, M. (2010). Tactor placement in wrist worn wearables. In Wearable Computers (ISWC), 2010 International Symposium on (pp. 1--8). IEEE.
[13]
Mukherjee, A., and Armstrong, C. (2017). Proactive balance control: kinematic analysis of a reach task. In Annual Meeting of the American Society Of Biomechanics, Penn State University.
[14]
Myles, K., Binseel, M. S. (2007). The tactile modality: A review of tactile sensivity and human tactile interfaces. Aberdeen Proving Ground, MD: Army Research Laboratory.
[15]
Pasciuto, I., Valero, A., Ausejo, S., & Celigüeta, J. T. (2011). A hybrid dynamic motion prediction method with collision detection. In Proceedings of the First International Symposium on Digital Human Modeling, Lyon, France, June 14--16, 2011.
[16]
Reed, M. P., Faraway, J., Chaffin, D. B., & Martin, B. J. (2006). The HUMOSIM Ergonomics Framework: A new approach to digital human simulation for ergonomic analysis (No. 2006-01-2365). SAE Technical Paper.
[17]
Renner, R. S., Velichkovsky, B. M., & Helmert, J. R. (2013). The perception of egocentric distances in virtual environments-a review. ACM Computing Surveys (CSUR), 46(2), 23.
[18]
Schaie, K. W., & Willis, S. L. (1999). Theories of everyday competence and aging. Handbook of theories of aging, 174--195.
[19]
Scheibe, R., Moehring, M. & Froehlich, B. Tactile Feedback at the Finger Tips for Improved Direct Interaction in Immersive Environments. 2007 IEEE Symposium on 3D User Interfaces, Charlotte, NC, 2007.
[20]
Weichert, F., Bachmann, D., Rudak, B., & Fisseler, D. (2013). Analysis of the accuracy and robustness of the leap motion controller. Sensors, 13(5), 6380--6393.
[21]
Wilska, A. (1954). On the vibrational sensitivity in different regions of the body surface.Acta Physiologica Scandinavica, 31, 284--289.

Cited By

View all
  • (2020)Real-World and Virtual-World Practices for Virtual Reality Games: Effects on Spatial Perception and Game PerformanceMultimodal Technologies and Interaction10.3390/mti40100014:1(1)Online publication date: 1-Jan-2020

Index Terms

  1. A virtual environment with haptic feedback for better distance estimation

    Recommendations

    Comments

    Please enable JavaScript to view thecomments powered by Disqus.

    Information & Contributors

    Information

    Published In

    cover image ACM Conferences
    EICS '17: Proceedings of the ACM SIGCHI Symposium on Engineering Interactive Computing Systems
    June 2017
    164 pages
    ISBN:9781450350839
    DOI:10.1145/3102113
    Permission to make digital or hard copies of part or all of this work for personal or classroom use is granted without fee provided that copies are not made or distributed for profit or commercial advantage and that copies bear this notice and the full citation on the first page. Copyrights for third-party components of this work must be honored. For all other uses, contact the Owner/Author.

    Sponsors

    Publisher

    Association for Computing Machinery

    New York, NY, United States

    Publication History

    Published: 26 June 2017

    Check for updates

    Author Tags

    1. distance estimation
    2. kinect
    3. leap motion
    4. tactor

    Qualifiers

    • Demonstration

    Funding Sources

    • Engineering and Physical Science Research Council

    Conference

    EICS '17
    Sponsor:

    Acceptance Rates

    Overall Acceptance Rate 73 of 299 submissions, 24%

    Upcoming Conference

    Contributors

    Other Metrics

    Bibliometrics & Citations

    Bibliometrics

    Article Metrics

    • Downloads (Last 12 months)10
    • Downloads (Last 6 weeks)0
    Reflects downloads up to 22 Nov 2024

    Other Metrics

    Citations

    Cited By

    View all
    • (2020)Real-World and Virtual-World Practices for Virtual Reality Games: Effects on Spatial Perception and Game PerformanceMultimodal Technologies and Interaction10.3390/mti40100014:1(1)Online publication date: 1-Jan-2020

    View Options

    Login options

    View options

    PDF

    View or Download as a PDF file.

    PDF

    eReader

    View online with eReader.

    eReader

    Media

    Figures

    Other

    Tables

    Share

    Share

    Share this Publication link

    Share on social media