Nothing Special   »   [go: up one dir, main page]

Next Article in Journal
Design and Implementation of C-Band Large-Power Planar Butler Matrix in SRS
Previous Article in Journal
Research on Visual Perception of Speed Bumps for Intelligent Connected Vehicles Based on Lightweight FPNet
You seem to have javascript disabled. Please note that many of the page functionalities won't work as expected without javascript enabled.
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Correction

Correction: Gao et al. A Modeling Method for Thermal Error Prediction of CNC Machine Equipment Based on Sparrow Search Algorithm and Long Short-Term Memory Neural Network. Sensors 2023, 23, 3600

1
School of Computer Science and Technology, University of Chinese Academy of Sciences, Beijing 100049, China
2
Shenyang Institute of Computing Technology, Chinese Academy of Sciences, Shenyang 110168, China
3
School of Mathematics and Computer Sciences, Chifeng University, Chifeng 024000, China
*
Author to whom correspondence should be addressed.
Sensors 2024, 24(7), 2133; https://doi.org/10.3390/s24072133
Submission received: 11 March 2024 / Accepted: 20 March 2024 / Published: 27 March 2024
(This article belongs to the Section Fault Diagnosis & Sensors)

Error in Figure

In the original publication [1], there was a mistake in Figures 16 and 17. There was a calculation error in the data presented in Figures 16 and 17. The correct Figure 16 and Figure 17 appear below.
Figure 16. Evaluation results of each model at velocity V2 = 5000 mm/min.
Figure 16. Evaluation results of each model at velocity V2 = 5000 mm/min.
Sensors 24 02133 g016
Figure 17. Evaluation results of each model at velocity V3 = 8000 mm/min.
Figure 17. Evaluation results of each model at velocity V3 = 8000 mm/min.
Sensors 24 02133 g017

Text Correction

There was an error in the original publication [1]. Due to the calculation error, the seventh paragraph of the fifth section of the paper needs to be revised.
A correction has been made to Section 5. Performance Analysis of Thermal Error Prediction Model, Paragraph 7, as follows:
From the above two graphs, we can see that, at the speed of V2 = 5000 mm/min, the RMSE values of SSA-LSTMNN, PSOA-LSTMNN, LSTMNN, and TRNN are 0.8108, 1.8513, 2.4251, and 8.044, respectively; the MAE values were 0.6917,1.716, 2.0476, and 7.3467, respectively; the R-Squared values were 0.9989, 0.9943, 0.9903, and 0.9038, respectively; and the MSE values were 0.6573, 3.4274, 5.881, and 64.7054, respectively. That is to say, compared with the other three models, the RMSE value of the SSA-LSTMNN model is 56%, 66%, and 89% lower than that of PSOA-LSTMNN, LSTMNN, and TRNN, respectively; the MAE value decreased by 59%, 66%, and 90%, respectively; the R-Squared value increased by 0.46%, 0.86%, and 10.52%, respectively; and the MSE value decreased by 80%, 88%, and 98%, respectively. At the speed of V3 = 8000 mm/min, the RMSE values of SSA-LSTMNN, PSOA-LSTMNN, LSTMNN, and TRNN are 1.2489, 2.58, 4.9143, and 9.8675, respectively; the MAE values were 1.035, 2.3032, 4.7152, and 8.571, respectively; the R-Squared values are 0.9985, 0.9934, 0.9779, and 0.9404, respectively; and the MSE values were 1.5599, 6.6566, 24.1501, and 97.367, respectively. Compared with the PSOA-LSTMNN, LSTMNN, and TRNN models, the RMSE values of the SSA-LSTMNN model decreased by 51%, 74%, and 87%, respectively; the MAE value decreased by 55%, 78%, and 88%, respectively; the value of R-Squared increased by 0.51%, 2.1%, and 6.17%, respectively; and the MSE value decreased by 76%, 93%, and 98%, respectively. The average RMSE values of the SSA-LSTMNN, PSOA-LSTMNN, LSTMNN, and TRNN thermal error prediction models at two different speeds are 1.0298, 2.2156, 3.6697, and 8.9557, respectively. The average MAE values are 0.8633, 2.0096, 3.3814, and 7.9588, respectively. The average R-Squared values are 0.9987, 0.9938, 0.9841, and 0.9221, respectively. The average MSE values are 1.1086, 5.042, 15.0155, and 81.0362, respectively. Compared with the three other models, the RMSE mean value of the SSA-LSTMNN model decreased by 53%, 71%, and 88%; the mean MAE value decreased by 57%, 74%, and 89%; the mean value of R-Squared increased by 0.49%, 1.48%, and 8.3%, respectively; and the mean MSE value decreased by 78%, 92%, and 98%, respectively.
The authors state that the scientific conclusions are unaffected. This correction was approved by the Academic Editor. The original publication has also been updated.

Reference

  1. Gao, Y.; Xia, X.; Guo, Y. A Modeling Method for Thermal Error Prediction of CNC Machine Equipment Based on Sparrow Search Algorithm and Long Short-Term Memory Neural Network. Sensors 2023, 23, 3600. [Google Scholar] [CrossRef] [PubMed]
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Share and Cite

MDPI and ACS Style

Gao, Y.; Xia, X.; Guo, Y. Correction: Gao et al. A Modeling Method for Thermal Error Prediction of CNC Machine Equipment Based on Sparrow Search Algorithm and Long Short-Term Memory Neural Network. Sensors 2023, 23, 3600. Sensors 2024, 24, 2133. https://doi.org/10.3390/s24072133

AMA Style

Gao Y, Xia X, Guo Y. Correction: Gao et al. A Modeling Method for Thermal Error Prediction of CNC Machine Equipment Based on Sparrow Search Algorithm and Long Short-Term Memory Neural Network. Sensors 2023, 23, 3600. Sensors. 2024; 24(7):2133. https://doi.org/10.3390/s24072133

Chicago/Turabian Style

Gao, Ying, Xiaojun Xia, and Yinrui Guo. 2024. "Correction: Gao et al. A Modeling Method for Thermal Error Prediction of CNC Machine Equipment Based on Sparrow Search Algorithm and Long Short-Term Memory Neural Network. Sensors 2023, 23, 3600" Sensors 24, no. 7: 2133. https://doi.org/10.3390/s24072133

APA Style

Gao, Y., Xia, X., & Guo, Y. (2024). Correction: Gao et al. A Modeling Method for Thermal Error Prediction of CNC Machine Equipment Based on Sparrow Search Algorithm and Long Short-Term Memory Neural Network. Sensors 2023, 23, 3600. Sensors, 24(7), 2133. https://doi.org/10.3390/s24072133

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop