Nothing Special   »   [go: up one dir, main page]

Next Article in Journal
Stepwise Synthesis, Hydrogen-Bonded Supramolecular Structure, and Magnetic Property of a Co–Mn Heterodinuclear Complex
Next Article in Special Issue
Estimation of Absolute Spin Counts in Nitronyl Nitroxide-Bearing Graphene Nanoribbons
Previous Article in Journal
Modelling the Effect of Zero-Field Splitting on the 1H, 13C and 29Si Chemical Shifts of Lanthanide and Actinide Compounds
Previous Article in Special Issue
Self-Assembly Properties of Amphiphilic Iron(III) Spin Crossover Complexes in Water and at the Air–Water Interface
You seem to have javascript disabled. Please note that many of the page functionalities won't work as expected without javascript enabled.
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

A Clock Transition in the Cr7Mn Molecular Nanomagnet

by
Charles A. Collett
1,
Kai-Isaak Ellers
1,
Nicholas Russo
2,†,
Kevin R. Kittilstved
2,
Grigore A. Timco
3,
Richard E. P. Winpenny
3 and
Jonathan R. Friedman
1,*
1
Department of Physics and Astronomy, Amherst College, Amherst, MA 01002, USA
2
Department of Chemistry, University of Massachusetts, Amherst, MA 01003, USA
3
School of Chemistry, The University of Manchester, Manchester M13 9PL, UK
*
Author to whom correspondence should be addressed.
Current address: Department of Physics, Boston University, Boston, MA 02215, USA.
Magnetochemistry 2019, 5(1), 4; https://doi.org/10.3390/magnetochemistry5010004
Submission received: 21 November 2018 / Revised: 4 January 2019 / Accepted: 10 January 2019 / Published: 14 January 2019
(This article belongs to the Special Issue Controlling Molecular Nanomagnets)
Figure 1
<p>(<b>a</b>) energy-level diagram for a Cr<sub>7</sub>Mn molecule, showing the zero-field avoided crossing between <math display="inline"><semantics> <mrow> <mo>|</mo> <mrow> <mi>m</mi> <mo>=</mo> <mo>±</mo> <mn>1</mn> </mrow> <mo>〉</mo> </mrow> </semantics></math> states, creating the <math display="inline"><semantics> <mrow> <mo>|</mo> <mo>±</mo> <mo>〉</mo> </mrow> </semantics></math> clock states; (<b>b</b>) molecular structure of Cr<sub>7</sub>Mn; (<b>c</b>) picture of a loop-gap resonator with a Cr<sub>7</sub>Mn sample in the loop.</p> ">
Figure 2
<p>(<b>a</b>) resonator <span class="html-italic">Q</span> vs. applied magnetic field at 4.00 GHz and powers from −20 to 0 dBm; (<b>b</b>) resonator <span class="html-italic">Q</span> divided by the <span class="html-italic">Q</span> at –20 dBm to emphasize the decoupling effect. The sharp peak around zero field suggests that this decoupling is associated with the clock transition.</p> ">
Figure 3
<p>Spin echo signal as a function of the length of the extra pulse, at 4.43 GHz and 0 Oe. The resulting Rabi oscillations confirm that our signal comes from spin echo. The offset is an artifact of our background-subtraction method.</p> ">
Figure 4
<p>(<b>a</b>) background-subtracted spin echo signal at various delay times <math display="inline"><semantics> <mrow> <mn>2</mn> <mi>τ</mi> </mrow> </semantics></math>, at 4.43 GHz and 20 Oe. The time axis has been shifted such that every echo occurs at the same effective time; (<b>b</b>) spin echo signal area as a function of the delay time <math display="inline"><semantics> <mrow> <mn>2</mn> <mi>τ</mi> </mrow> </semantics></math> for 10% (blue circles) and 0.5% (orange squares) samples. The lines connecting datapoints are guides to the eye.</p> ">
Figure 5
<p><math display="inline"><semantics> <msub> <mi>T</mi> <mn>2</mn> </msub> </semantics></math> as a function of applied field for 10% (blue circles, at 4.43 GHz) and 0.5% (orange squares, at 4.50 GHz) samples. The apparent offset of the peaks from 0 Oe is due to remnant field in our magnet. The lines connecting datapoints are guides to the eye.</p> ">
Versions Notes

Abstract

:
A viable qubit must have a long coherence time T 2 . In molecular nanomagnets, T 2 is often limited at low temperatures by the presence of dipole and hyperfine interactions, which are often mitigated through sample dilution, chemical engineering and isotope substitution in synthesis. Atomic-clock transitions offer another route to reducing decoherence from environmental fields by reducing the effective susceptibility of the working transition to field fluctuations. The Cr7Mn molecular nanomagnet, a heterometallic ring, features a clock transition at zero field. Both continuous-wave and spin-echo electron-spin resonance experiments on Cr7Mn samples, diluted via co-crystallization, show evidence of the effects of the clock transition with a maximum T 2 390 ns at 1.8 K. We discuss improvements to the experiment that may increase T 2 further.

1. Introduction

The fundamental building block of a quantum computer is a qubit, a two-level system that can be in a superposition of the two levels. There are a wide variety of physical systems that can be used as qubits. Molecular nanomagnets (MNMs) have received significant attention due to their possible utility as spin qubits [1,2,3]. MNMs can be chemically engineered, allowing the design of samples with desired characteristics, and manipulation and control of the spin state can be performed through electron-spin resonance (ESR) [4,5,6]. The ideal qubit would feature a quantum state with a long lifetime that is able to be precisely controlled and measured, as well as coupled to an array of other such qubits in a controllable manner. The engineerability of MNMs affords the ability to couple multiple MNMs together to create multi-qubit systems [4,7,8,9]. In order for such systems to be viable qubits, the coherence time T 2 needs to be long compared to the time required for quantum gates. Here, we present experimental results showing an enhancement of T 2 in the Cr7Mn MNM through the use of a so-called atomic-clock transition.
Cr7Mn ([(CH3)2NH2][Cr7MnF8((CH3)3CCOO)16]) is a paramagnetic ring, shown in Figure 1b [10,11]. At low-temperature, it has a ground-state spin of S = 1 that can be described by the spin Hamiltonian
H = D S z 2 + E ( S x 2 S y 2 ) g μ B B · S ,
where D = 21 GHz, E = 1.9 GHz, g = 1.96 is the Landé g-factor and μ B is the Bohr magneton. The D term describes the longitudinal anisotropy of the molecule, and gives the | ± 1 states a lower energy than the | 0 state, while the E term describes the transverse anisotropy that breaks the zero-field degeneracy of the | ± 1 states by mixing them, as shown at the left edge of Figure 1a. Due to this mixing, the two lowest-energy levels are the superpositions | ± = ( | + 1 ± | 1 ) / 2 , forming an avoided crossing at zero field with a “tunnel splitting” energy Δ = 2 E . The application of a magnetic field along the easy axis, B z , results in an additional Zeeman splitting of the two lowest energy levels with no change in the energy of the | 0 state, as shown in Figure 1a.
Near the zero-field avoided crossing, the leading-order dependence of the tunnel splitting on the magnetic field is quadratic: Δ B z 2 . Because of this dependence, at zero field, the splitting is, to first order, insensitive to field fluctuations: d Δ d B z | B z = 0 = 0 . This type of transition is known as an atomic-clock, or just clock, transition, based on its use in the atomic clock community to achieve frequency stability [12]. A recent experiment in a Ho-based MNM has shown that clock transitions produce significant increases in quantum coherence times [13], as the main source of decoherence at low temperatures is dipolar interactions with neighboring spins, whose fluctuations cause changes in the local magnetic field seen by the central spin [14]. At a clock transition, the effect of these fluctuations is suppressed, leading to the observed increase in coherence times. Here, we show evidence of the effect of a clock transition in Cr7Mn.

2. Results

We use ESR to probe and control the state of this molecule, coupling radiation to our samples with custom loop-gap resonators (LGRs). LGRs concentrate the oscillating magnetic field in a narrow region, producing high filling factors [15].

2.1. CW Experiments

For our continuous-wave (CW) measurements, we placed a crystal of Cr7Mn in the loop of an LGR tuned to 4.00 GHz, near the zero-field tunnel splitting where the effect of the clock transition is strongest. We then cooled it to 1.8 K and swept a magnetic field applied along the easy axis while measuring Q = ν / Δ ν of the resonator, where ν is the resonance frequency and Δ ν is the full width at half maximum of the resonance peak. When the sample is on resonance with the resonator, it absorbs energy from the radio-frequency (RF) magnetic field in the loop, increasing the loading and reducing the Q of the resonator. As such, we measure the coupling of the sample to the resonator by reduction in Q.
Figure 2a shows measured values of Q as a function of magnetic field. The lowest (purple) trace corresponds to an input power of −20 dBm, while our highest power of 0 dBm is red, with intermediate powers designated with intermediate spectral colors. The slight dip around 500 Oe is due to an impurity unrelated to the sample. At the lowest powers, we see a broad dip in Q around zero field, as expected for a transition between the two levels in the avoided crossing (cf. Figure 1a); the width of the peak is due to significant inhomogeneous broadening in the sample, as well as the fact that the transition frequency depends quadratically on field near the clock transition. As we increased the power, Q also increased over the entire field range, but with a pronounced shape change near zero field. An increase in Q indicates a decrease in the coupling between sample and resonator, so this effect shows that as power increases the sample is decoupling from the resonator preferentially around zero field. We have also done experiments at lower powers, down to −55 dBm (not shown), with results indistinguishable from the −20 dBm trace. This shows that the decoupling is a nonlinear effect, associated with the interaction between the sample and the resonator and not a feature of the resonator itself.
To isolate this power dependence, we divided the –20 dBm Q data from the higher power Q data, shown in Figure 2b as Q / Q LP . The resulting “decoupling peak” is nearly triangular, being sharply peaked at zero field; the shape change seen in the raw Q data is the result of this triangular decoupling peak superimposed with the smoother resonance dip. This plot shows that the decoupling has a smooth, monotonic power dependence and is strongest near zero field. The reduction in coupling with increasing power is consistent with saturation of the transition, but the shape of the decoupling peak suggests that the saturation is being strongly enhanced near zero field. As the main feature at zero field is the avoided crossing, we propose that this decoupling peak demonstrates saturation enhanced by the increase in T 2 produced by the clock transition [16,17].

2.2. Spin Echo Experiments

While our CW measurements suggest the existence of a clock transition in Cr7Mn, to verify it, we directly measured T 2 using a Hahn echo sequence. Using the same Cr7Mn crystal from our CW experiments, we were unable to see any echo, indicating that T 2 is too short for our apparatus to detect because of strong dipolar interactions between molecules within the crystal. To increase T 2 by increasing the average distance between molecular spins, we diluted the Cr7Mn molecules through co-crystallization with an isostructural diamagnetic analogue, [(CH3)2NH2][Ga7ZnF8((CH3)3CCOO)16] (“Ga7Zn”) [18,19]. The resulting solid solution crystal has the advantage of preserving the orientational order of the molecules. Previous measurements of dilute Cr7Mn suggest a maximum coherence time of ∼600 ns at 2 K in the dilute limit, increasing to ∼4 μs for deuterated samples [20].
With our 10% and 0.5% samples, T 2 was long enough to be measurable. To verify that we were observing a spin-echo signal, we performed nutation measurements by changing the length of the extra pulse described in the Methods section. Some results for a 10% sample, background-subtracted using the high field method described in Methods, are plotted in Figure 3, showing the expected Rabi oscillations. We used these results to determine the starting duration of our π / 2 and π pulses, which we then tuned to maximize our signal.
Spin echo results for a 10%-dilution sample at several different delay times τ , background subtracted using the third-pulse method described in Methods, are shown in Figure 4a, with each trace offset in time so the echoes occur at the same place in the plot. We measured T 2 by plotting the echo signal area vs. 2 τ , as shown in Figure 4b, and fitting to an exponential decay function to obtain T 2 = 380 ns at an applied field of 20 Oe for the 10% sample. Surprisingly, our measured T 2 value for the 0.5% sample was only slightly higher, T 2 = 390 ns at 20 Oe. Thus, different dilution levels did not produce the expected increase in T 2 , instead yielding roughly constant coherence times.
As we are near neither the dilute limit nor the expected maximum T 2 , we suspect that the co-crystallization method is limiting our value of T 2 somehow, either through spectral diffusion produced by spins in the Ga7Zn, interaction with the nuclear spin of Ga, or acoustic phonons in the crystal. Alternatively, the Cr7Mn may be aggregating in the co-crystallization, limiting the effect of dilution. The presence of an echo signal for the dilute samples shows that dilution is having some effect, but the lack of change in T 2 indicates that the effect of this method of dilution for this molecule has saturated by the time we have reached 10% dilution. This limitation should be specific to our co-crystallization method, and we expect the previously-used method of diluting Cr7Mn by dissolving it in toluene should be more effective, as that technique has yielded larger values of T 2 [20].
We performed spin echo measurements over a range of fields in order to find the field dependence. Figure 5 shows measured T 2 as a function of field for samples of both dilutions. The data exhibit a significant peak in T 2 near zero field, as we would expect for a clock transition. This peak appears slightly away from zero field due to the remnant field of our superconducting magnet, such that an applied field of 20 Oe is required to zero the field at the sample. This peak corroborates the hypothesis that the avoided crossing in Cr7Mn acts as a clock transition, agreeing with our CW results.

3. Conclusions

We have presented here results from both CW and pulsed experiments exploring a possible clock transition in the MNM Cr7Mn. The CW results suggest the presence of a clock transition through a field-dependent saturation peak at higher radiation powers, centered around zero field. These results are corroborated by spin echo experiments, which also show a peak in T 2 around zero field, where we expect the effect of the clock transition to be strongest. This agreement shows that CW saturation experiments can be useful in locating clock transitions and characterizing the field dependence of coherence times.
In addition, we found that our method of dilution via co-crystallization is ineffective past a fairly low level of dilution. This restriction in dilution limited our ability to characterize the clock transition. Experiments to work around this restriction by creating dilute solutions of Cr7Mn dissolved in toluene and measuring their properties are ongoing. Characterization of such samples will allow us to determine if the field dependence of T 2 exhibits the expected significant enhancement near zero field, the center of the avoided crossing.

4. Materials and Methods

We used custom loop-gap resonators for our ESR experiments, and tuned their frequencies by inserting a dielectric into the gap. Our sample sat in the loop of the resonator, as shown in Figure 1c, and we coupled radiation into the system through antennae above the loop and/or the gap. Continuous wave measurements were done using a vector network analyzer (KeySight E5063A, Santa Rosa, CA, USA). Pulsed experiments were performed using a homemade pulsed-ESR spectrometer, configured to perform a Hahn echo sequence. Two RF pulses were sent to the resonator, the first with a duration such that it tipped the spin state by an angle of π / 2 , followed after a time τ by a second pulse which tipped the state by an angle of π , producing a “spin echo” a time τ after the second pulse, resulting in the sequence π / 2 τ π τ echo. Fitting the dependence of the echo signal on 2 τ to an exponential decay gives a time constant of T 2 . We also performed background subtraction in one of two ways. For our preliminary experiments, we took data at a low field and a much higher field, where the sample is no longer coupled to the resonator; subtracting the two signals removes the background. For our T 2 experiments, we alternated sending in a π pulse several μs before the π / 2 pulse. This extra pulse inverts the echo; subtracting signals with this extra pulse from signals without the extra pulse removes the background while effectively doubling our echo signal.
Synthesis of Cr7Mn [21] and Ga7Zn [19] was done following published procedures. To create the dilute solution, (Me2NH2)[Ga7ZnF8(O2CtBu)16] and (Me2NH7)[Cr7MnF8(O2CtBu)16] were dissolved in anhydrous toluene while stirring at 100 °C for 10 min under an N2 atmosphere. The clear solution was cooled to ambient temperature and left undisturbed. Well-shaped green crystals were collected after several days. We produced samples volumetrically diluted to 10% and 0.5% Cr7Mn (green) in Ga7Zn (clear/white). The dilution had the qualitative effect of markedly decreasing the green tint of the crystals with increased dilution.

Supplementary Materials

Supplementary File 1

Author Contributions

Conceptualization, C.A.C. and J.R.F.; Methodology, C.A.C. and J.R.F.; Software, C.A.C. and K.-I.E.; Validation, C.A.C., K.-I.E. and J.R.F.; Formal Analysis, C.A.C. and K-I.E.; Investigation, C.A.C. and K.-I.E.; Resources, N.R., K.R.K., G.A.T. and R.E.P.W.; Sample Preparation, G.A.T.; Data Curation, C.A.C.; Writing—Original Draft Preparation, C.A.C.; Writing—Review and Editing, C.A.C., K.-I.E., K.R.K. and J.R.F.; Visualization, C.A.C.; Supervision, J.R.F.; Project Administration, J.R.F.; Funding Acquisition, J.R.F.

Funding

This research was funded by the U.S. National Science Foundation under Grant Nos. DMR-1310135 and DMR-1708692 and by the Amherst College Dean of Faculty. The research was also funded by the EPSRC(UK) via an Established Career Fellowship (EP/R011079/1) to R.E.P.W.

Acknowledgments

We thank Gajadhar Joshi, Stephen Hill, Adrian Lupascu, Jonathan Baugh and Miles Blencowe for useful conversations, and Changyun Yoo and Elizabeth Turnbull for preliminary sample characterization work.

Conflicts of Interest

The authors declare no conflict of interest.

Abbreviations

The following abbreviations are used in this manuscript:
MNMMolecular nanomagnet
ESRElectron-spin resonance
LGRLoop-gap resonator
CWContinuous-wave
RFRadio frequency

References

  1. Leuenberger, M.N.; Loss, D. Quantum computing in molecular magnets. Nature 2001, 410, 789–793. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  2. Tejada, J.; Chudnovsky, E.M.; Del Barco, E.; Hernandez, J.M.; Spiller, T.P. Magnetic qubits as hardware for quantum computers. Nanotechnology 2001, 12, 181. [Google Scholar] [CrossRef]
  3. Friedman, J.R.; Sarachik, M.P. Single-Molecule Nanomagnets. Annu. Rev. Condens. Matter Phys. 2010, 1, 109–128. [Google Scholar] [CrossRef] [Green Version]
  4. Ardavan, A.; Bowen, A.M.; Fernandez, A.; Fielding, A.J.; Kaminski, D.; Moro, F.; Muryn, C.A.; Wise, M.D.; Ruggi, A.; McInnes, E.J.L.; et al. Engineering coherent interactions in molecular nanomagnet dimers. NPJ Quantum Inf. 2015, 1, 15012. [Google Scholar] [CrossRef] [Green Version]
  5. Wedge, C.J.; Timco, G.A.; Spielberg, E.T.; George, R.E.; Tuna, F.; Rigby, S.; McInnes, E.J.L.; Winpenny, R.E.P.; Blundell, S.J.; Ardavan, A. Chemical Engineering of Molecular Qubits. Phys. Rev. Lett. 2012, 108, 107204. [Google Scholar] [CrossRef] [PubMed]
  6. Timco, G.A.; Carretta, S.; Troiani, F.; Tuna, F.; Pritchard, R.J.; Muryn, C.A.; McInnes, E.J.L.; Ghirri, A.; Candini, A.; Santini, P.; et al. Engineering the coupling between molecular spin qubits by coordination chemistry. Nat. Nanotechnol. 2009, 4, 173–178. [Google Scholar] [CrossRef]
  7. Chiesa, A.; Whitehead, G.F.S.; Carretta, S.; Carthy, L.; Timco, G.A.; Teat, S.J.; Amoretti, G.; Pavarini, E.; Winpenny, R.E.P.; Santini, P. Molecular nanomagnets with switchable coupling for quantum simulation. Sci. Rep. 2015, 4, 7423. [Google Scholar] [CrossRef]
  8. Timco, G.A.; Faust, T.B.; Tuna, F.; Winpenny, R.E.P. Linking heterometallic rings for quantum information processing and amusement. Chem. Soc. Rev. 2011, 40, 3067. [Google Scholar] [CrossRef]
  9. Ferrando-Soria, J.; Moreno Pineda, E.; Chiesa, A.; Fernandez, A.; Magee, S.A.; Carretta, S.; Santini, P.; Vitorica-Yrezabal, I.J.; Tuna, F.; Timco, G.A.; et al. A modular design of molecular qubits to implement universal quantum gates. Nat. Commun. 2016, 7, 11377. [Google Scholar] [CrossRef] [Green Version]
  10. Piligkos, S.; Weihe, H.; Bill, E.; Neese, F.; El Mkami, H.; Smith, G.M.; Collison, D.; Rajaraman, G.; Timco, G.A.; Winpenny, R.E.P.; et al. EPR Spectroscopy of a Family of CrIII7MII (M = Cd, Zn, Mn, Ni) “Wheels”: Studies of Isostructural Compounds with Different Spin Ground States. Chem. A Eur. J. 2009, 15, 3152–3167. [Google Scholar] [CrossRef]
  11. Lancaster, T.; Blundell, S.J.; Pratt, F.L.; Franke, I.; Steele, A.J.; Baker, P.J.; Salman, Z.; Baines, C.; Watanabe, I.; Carretta, S.; et al. Relaxation of muon spins in molecular nanomagnets. Phys. Rev. B 2010, 81, 140409R. [Google Scholar] [CrossRef]
  12. Bollinger, J.J.; Prestage, J.D.; Itano, W.M.; Wineland, D.J. Laser-Cooled-Atomic Frequency Standard. Phys. Rev. Lett. 1985, 54, 1000–1003. [Google Scholar] [CrossRef] [PubMed]
  13. Shiddiq, M.; Komijani, D.; Duan, Y.; Gaita-Ariño, A.; Coronado, E.; Hill, S. Enhancing coherence in molecular spin qubits via atomic clock transitions. Nature 2016, 531, 348–351. [Google Scholar] [CrossRef] [PubMed]
  14. Takahashi, S.; Tupitsyn, I.S.; van Tol, J.; Beedle, C.C.; Hendrickson, D.N.; Stamp, P.C.E. Decoherence in crystals of quantum molecular magnets. Nature 2011, 476, 76–79. [Google Scholar] [CrossRef] [PubMed]
  15. Froncisz, W.; Hyde, J.S. The loop-gap resonator: A new microwave lumped circuit ESR sample structure. J. Magn. Reson. 1982, 47, 515–521. [Google Scholar] [CrossRef]
  16. Portis, A.M. Electronic Structure of F Centers: Saturation of the Electron Spin Resonance. Phys. Rev. 1953, 91, 1071–1078. [Google Scholar] [CrossRef]
  17. Castner, T.G., Jr. Saturation of the paramagnetic resonance of a V center. Phys. Rev. 1959, 115, 1506. [Google Scholar] [CrossRef]
  18. Henderson, J.J.; Ramsey, C.M.; del Barco, E.; Stamatatos, T.C.; Christou, G. Control of the inhomogeneity degree by magnetic dilution in crystals of antiferromagnetic molecular rings. Phys. Rev. B 2008, 78, 214413. [Google Scholar] [CrossRef]
  19. Moro, F.; Kaminski, D.; Tuna, F.; Whitehead, G.F.S.; Timco, G.A.; Collison, D.; Winpenny, R.E.P.; Ardavan, A.; McInnes, E.J.L. Coherent electron spin manipulation in a dilute oriented ensemble of molecular nanomagnets: Pulsed EPR on doped single crystals. Chem. Commun. 2013, 50, 91–93. [Google Scholar] [CrossRef] [PubMed]
  20. Ardavan, A.; Rival, O.; Morton, J.J.L.; Blundell, S.J.; Tyryshkin, A.M.; Timco, G.A.; Winpenny, R.E.P. Will Spin-Relaxation Times in Molecular Magnets Permit Quantum Information Processing? Phys. Rev. Lett. 2007, 98, 057201. [Google Scholar] [CrossRef]
  21. Larsen, F.K.; McInnes, E.J.L.; El Mkami, H.; Overgaard, J.; Piligkos, S.; Rajaraman, G.; Rentschler, E.; Smith, A.A.; Smith, G.M.; Boote, V.; et al. Synthesis and Characterization of Heterometallic Cr7M Wheels. Angew. Chem. Int. Ed. 2003, 42, 101. [Google Scholar] [CrossRef]
Figure 1. (a) energy-level diagram for a Cr7Mn molecule, showing the zero-field avoided crossing between | m = ± 1 states, creating the | ± clock states; (b) molecular structure of Cr7Mn; (c) picture of a loop-gap resonator with a Cr7Mn sample in the loop.
Figure 1. (a) energy-level diagram for a Cr7Mn molecule, showing the zero-field avoided crossing between | m = ± 1 states, creating the | ± clock states; (b) molecular structure of Cr7Mn; (c) picture of a loop-gap resonator with a Cr7Mn sample in the loop.
Magnetochemistry 05 00004 g001
Figure 2. (a) resonator Q vs. applied magnetic field at 4.00 GHz and powers from −20 to 0 dBm; (b) resonator Q divided by the Q at –20 dBm to emphasize the decoupling effect. The sharp peak around zero field suggests that this decoupling is associated with the clock transition.
Figure 2. (a) resonator Q vs. applied magnetic field at 4.00 GHz and powers from −20 to 0 dBm; (b) resonator Q divided by the Q at –20 dBm to emphasize the decoupling effect. The sharp peak around zero field suggests that this decoupling is associated with the clock transition.
Magnetochemistry 05 00004 g002
Figure 3. Spin echo signal as a function of the length of the extra pulse, at 4.43 GHz and 0 Oe. The resulting Rabi oscillations confirm that our signal comes from spin echo. The offset is an artifact of our background-subtraction method.
Figure 3. Spin echo signal as a function of the length of the extra pulse, at 4.43 GHz and 0 Oe. The resulting Rabi oscillations confirm that our signal comes from spin echo. The offset is an artifact of our background-subtraction method.
Magnetochemistry 05 00004 g003
Figure 4. (a) background-subtracted spin echo signal at various delay times 2 τ , at 4.43 GHz and 20 Oe. The time axis has been shifted such that every echo occurs at the same effective time; (b) spin echo signal area as a function of the delay time 2 τ for 10% (blue circles) and 0.5% (orange squares) samples. The lines connecting datapoints are guides to the eye.
Figure 4. (a) background-subtracted spin echo signal at various delay times 2 τ , at 4.43 GHz and 20 Oe. The time axis has been shifted such that every echo occurs at the same effective time; (b) spin echo signal area as a function of the delay time 2 τ for 10% (blue circles) and 0.5% (orange squares) samples. The lines connecting datapoints are guides to the eye.
Magnetochemistry 05 00004 g004
Figure 5. T 2 as a function of applied field for 10% (blue circles, at 4.43 GHz) and 0.5% (orange squares, at 4.50 GHz) samples. The apparent offset of the peaks from 0 Oe is due to remnant field in our magnet. The lines connecting datapoints are guides to the eye.
Figure 5. T 2 as a function of applied field for 10% (blue circles, at 4.43 GHz) and 0.5% (orange squares, at 4.50 GHz) samples. The apparent offset of the peaks from 0 Oe is due to remnant field in our magnet. The lines connecting datapoints are guides to the eye.
Magnetochemistry 05 00004 g005

Share and Cite

MDPI and ACS Style

Collett, C.A.; Ellers, K.-I.; Russo, N.; Kittilstved, K.R.; Timco, G.A.; Winpenny, R.E.P.; Friedman, J.R. A Clock Transition in the Cr7Mn Molecular Nanomagnet. Magnetochemistry 2019, 5, 4. https://doi.org/10.3390/magnetochemistry5010004

AMA Style

Collett CA, Ellers K-I, Russo N, Kittilstved KR, Timco GA, Winpenny REP, Friedman JR. A Clock Transition in the Cr7Mn Molecular Nanomagnet. Magnetochemistry. 2019; 5(1):4. https://doi.org/10.3390/magnetochemistry5010004

Chicago/Turabian Style

Collett, Charles A., Kai-Isaak Ellers, Nicholas Russo, Kevin R. Kittilstved, Grigore A. Timco, Richard E. P. Winpenny, and Jonathan R. Friedman. 2019. "A Clock Transition in the Cr7Mn Molecular Nanomagnet" Magnetochemistry 5, no. 1: 4. https://doi.org/10.3390/magnetochemistry5010004

APA Style

Collett, C. A., Ellers, K. -I., Russo, N., Kittilstved, K. R., Timco, G. A., Winpenny, R. E. P., & Friedman, J. R. (2019). A Clock Transition in the Cr7Mn Molecular Nanomagnet. Magnetochemistry, 5(1), 4. https://doi.org/10.3390/magnetochemistry5010004

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop