Nothing Special   »   [go: up one dir, main page]
Next Article in Journal
A Deep-Learning Approach for Identifying a Drunk Person Using Gait Recognition
Next Article in Special Issue
DeepBreastCancerNet: A Novel Deep Learning Model for Breast Cancer Detection Using Ultrasound Images
Previous Article in Journal
Digitalization Trend and Its Influence on the Development of the Operational Process in Production Companies
You seem to have javascript disabled. Please note that many of the page functionalities won't work as expected without javascript enabled.
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Applied Sciences
Volume 13
Issue 3
10.3390/app13031394
applsci-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles thumb_up
...
Endorse textsms
...
Comment
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

AI-Enabled Wearable Medical Internet of Things in Healthcare System: A Survey

by
Fazli Subhan
1,2,
Alina Mirza
3,
Mazliham Bin Mohd Su’ud
2,*,
Muhammad Mansoor Alam
2,
Shibli Nisar
3,
Usman Habib
4 and
Muhammad Zubair Iqbal
1
1
Department of Computer Science, National University of Modern Languages-NUML, Islamabad 44000, Pakistan
2
Faculty of Computer and Information, Multimedia University, Cyberjaya 63100, Malaysia
3
Department of Electrical Engineering, National University of Sciences and Technology, Islamabad 44000, Pakistan
4
Department of Computer Science, National University of Computer and Emerging Sciences, Islamabad 44000, Pakistan
*
Author to whom correspondence should be addressed.
Appl. Sci. 2023, 13(3), 1394; https://doi.org/10.3390/app13031394
Submission received: 12 December 2022 / Revised: 1 January 2023 / Accepted: 6 January 2023 / Published: 20 January 2023
(This article belongs to the Special Issue Artificial Intelligence and Robotics in Healthcare)
Browse Figures
Figure 1
<p>Applications of Internet of Medical Things (IoMT).</p> "> Figure 2
<p>Categorization of wearable devices.</p> ">
Review Reports Versions Notes

Abstract

:
Technology has played a vital part in improving quality of life, especially in healthcare. Artificial intelligence (AI) and the Internet of Things (IoT) are extensively employed to link accessible medical resources and deliver dependable and effective intelligent healthcare. Body wearable devices have garnered attention as powerful devices for healthcare applications, leading to various commercially available devices for multiple purposes, including individual healthcare, activity alerts, and fitness. The paper aims to cover all the advancements made in the wearable Medical Internet of Things (IoMT) for healthcare systems, which have been scrutinized from the perceptions of their efficacy in detecting, preventing, and monitoring diseases in healthcare. The latest healthcare issues are also included, such as COVID-19 and monkeypox. This paper thoroughly discusses all the directions proposed by the researchers to improve healthcare through wearable devices and artificial intelligence. The approaches adopted by the researchers to improve the overall accuracy, efficiency, and security of the healthcare system are discussed in detail. This paper also highlights all the constraints and opportunities of developing AI enabled IoT-based healthcare systems.

1. Introduction

The needs of traditional healthcare institutions for the general public are being impacted by population expansion [1]. Medical healthcare services are neither cheap nor accessible to the general public, despite robust infrastructure and sophisticated technology. The expense of healthcare is rising globally as the world’s population ages. According to the most recent data, China spent over 4634 billion yuan in 2016, accounting for around 6.36 percent of total GDP, and 7231 billion yuan in 2021, accounting for 7.1 percent of total GDP [2]. To overcome these obstacles, an intelligent healthcare system is essential to educate the public about their medical concerns and keep them up to date on their medical diseases in real time.
Users with smart healthcare can tackle various medical situations on their own. It provides for remote monitoring and tracking of the patient, which lowers the patient’s healthcare expenses. It also helps clinicians offer their amenities without being constrained by location. Over the previous 10 years, the trend has turned toward smart wearable devices, smart homes, smart cities, and a functioning smart healthcare system that can help an aging person live a healthy life [3]. The Internet of Things (IoT) is a rapidly growing interactive model, where large linked devices interact to enable communication between people and objects in today’s digital age [4,5,6]. IoT in terms of healthcare means any device that accumulates health-related information about people via phones, smart wearable devices, bands, implanted surgical instruments, or other portable devices that can monitor health.
The IoT is used in hospitals and households to remotely monitor patients. By recognizing and treating hazardous illnesses and issues at an early stage, remote patient monitoring in the healthcare sector may dramatically minimize needless visits to medical professionals, hospital stays, re-admissions, and medical care expenditures [7]. Currently, our healthcare system is very expensive due to the patient’s hospitalization until treatment duration. Smart technology that can remotely monitor patients can help solve these challenges. The Internet of Medical Things (MIoT) reduces healthcare costs by gathering and exchanging real-time patient health data with clinicians. This enables the treatment of health issues before they become major illnesses [8]. The MIoT will undoubtedly improve people’s quality of life. Integrated tool development can result in a variety of useful enhancements in integrated information system services, system processing, and communications with a wide range of control. As a result, in the realm of healthcare, multiple IoT-based digital, wearable devices and applications (as depicted in Figure 1) are required to identify, track, and prevent various chronic and viral illnesses [9].
Wearable devices are one of the most important IoT technologies in the present era [10]. Wearable devices are at the center of every conversation in IoT-related healthcare systems, as they have the potential to bring about a major transformation. They are also seen to be the ideal strategy for monitoring, tracking, and detecting chronic and viral illnesses in the healthcare sector. Wearable devices, which are considered an essential aspect of the IoTs, let patients get the proper medical care at the right moment [11,12]. They have the potential to transform the standard of human existence in the current era in ways that cannot be achieved exclusively through smartphones, and customers have shown a strong desire to purchase and wear these devices. In hospitals, medical equipment along with the medical staff deployment can be tracked by IoT devices with sensors [13,14]. These devices are extensively employed in the healthcare industry to monitor patients and produce alerts for individuals who have dangerous conditions.
In the last two decades, researchers have invented various wearable devices that can monitor vital health constraints such as pulse rate, breathing, blood pressure, lungs sound, body actions, temperature, etc., as shown in Figure 2. Due to the variety of wearable devices in the market for monitoring different health parameters, it is difficult to select the appropriate smart wearables from the market. Hence, there is a real need to investigate the existing wearable in terms of their performance and identify their discrepancies. Therefore, in this paper, the authors aimed to focus on and discuss the most trending wearables in the medical field for the purpose of detection and prevention of multiple diseases. A comparison of the most widely available wearable devices for monitoring the vital health signs of humans and infectious diseases such as COVID-19 is carried out in this paper [15,16,17,18,19,20]. Moreover, the importance of improved healthcare services due to IOT technology is highlighted. In Section 2, the different IoT healthcare applications are explored. Smart wearables for healthcare are presented in Section 3. Section 4 presents the challenges and issues related to smart wearables devices, followed by the conclusion in Section 5.

2. Literature Review

Internet of Things in Healthcare

IoT based health monitoring solutions and medical wearables are enabling the creation of hospitals “without walls”, where medical healthcare professionals from different fields provide their healthcare services remotely to outpatients, thus freeing up vital bed space for patients who require extra care and minimizing the cost burden. It also allows people to have extra control over their fitness all the time. Before COVID-19, remote health monitoring systems had already gained popularity. During the COVID-19 pandemic, the demand for smart technology and wearable medical devices increased for remote patient monitoring [21]. It is assumed that demand for the devices in the market will double over the next 5 years. According to the Royal College of General Practitioners, 71 percent of regular consultations were conducted remotely in the four weeks leading up to 12 April 2020, compared to only 25% in the same period in 2019 [21]. This is a massive change.
An IoT based health supervising system has multiple advantages in the medical field, but a few drawbacks are also present: the need to regularly reconfigure individual sensors to maintain supervising process accuracy; connectivity loss in case of device battery failure, and occurrence of security hazards due to massive storage of data in a single database. IoT healthcare has been developed for several purposes, such as diabetes sensing, BP monitoring, rehabilitation systems, electrocardiogram supervision, assisted ambient living (AAL), etc. Blood sugar monitoring shows individual patterns of change and facilitates making diet plans and prescribing medicines [22]. A system for monitoring heart activities, i.e., IoT-based ECG monitoring, was proposed in [23]. A few IoT- based healthcare applications are listed in Table 1.
In [44], an instrument for gathering and conveying blood pressure data over an IoT network was presented. Monitoring human body temperature is an important aspect of healthcare, as it is considered a dynamic sign in controlling homeostasis [27].

3. Wearable Technologies for Different Body Parts

Different aspects, such as optical, electrical, piezoelectric effects, and electrochemical all have a vital part in the operation of sensors in the healthcare sector. Different parts of the human body have their own wearable devices. Wearable devices are designed to provide useful information to their users while they are wearing them. These wearable devices are categorized by their position and material as shown in Figure 2.
In this section, a few of the most significant wearables worn on the human body for the purpose of healthcare monitoring are summarized.

3.1. Smart Thermometer

There are a variety of IOT based thermometers developed that are low cost, small in size, and wearable [10] and available in different forms, such as touch, patch, and radiometric [45]. A very popular type of thermometer was developed by a US-based company called KINSA to detect whether people had a high fever in the pandemic; this thermometer is connected to the Internet as well. This thermometer was launched for the purpose of detecting people having symptoms of flu with fever, and the developer can now determine the most suspected sectors of the states of the USA on the basis of recorded temperature [46,47]. Another thermometer is Temp Traq, which is a wearable wireless thermometer that monitors temperature continuously for 24 h and is waterproof [48]. Tucky is also a prominent type of smart thermometer that performs well in dangerous infections and febrile seizure conditions [49]. A variety of small size smart thermometers are also available in the market, such as iSense, iFever, and Tempdrop, which are reliable and helpful for monitoring chronic and viral diseases.

3.2. Smart Helmet

During pandemics such as COVID-19, the wearable smart helmet has gained popularity, and it has proved to be safer and gives good results as compared to an infrared thermometer gun. This helmet is a combination of a smart helmet and a thermal camera [50]. When the individual body temperature rises, the person’s location and image are captured by an optical camera, and this information is sent to the relevant authorities so that they can make timely decisions and locate the suspected individual. In this scenario, Google locates the person and enhances the performance by also locating the places visited by the person. Currently, Italy, China, the USA, and the UAE have used this wearable helmet to observe gatherings within a distance of 2 m for the purpose of crowd control during the COVID-19 pandemic [20]. Another commercially available product, the KC N901 smart helmet, has the ability to detect high temperatures in gatherings, trace 200 individuals within a minute, and achieve an accuracy of near to 96% [51].

3.3. Wrist Band

A wrist band is a wearable that is worn on the wrist or perhaps on the forearm. Currently, this wearable is also used by researchers for different purposes in the field of healthcare to monitor diseases. The E4 wristband is deployed for run-time streaming and investigation of physiological data. Research conducted by [52] applied the E4 wristband to detect the early symptoms of influenza and rhinovirus. The authors measured the individual movement, body temperature, daily life activity, and pulse rate with the help of the E4 wristband. It was found that this wearable wristband is simple and feasible for monitoring the individual during a viral disease spreading period, and it also makes a good contribution to limiting the spread of infections related to respiratory systems, such as during the COVID-19 pandemic. In [53], a wristband IoT based healthcare kit was designed that monitored the vital signs of a person’s health such as pulse rate, temperature, BP, and sent them to the specific medical practitioner with an alert.

3.4. Smart Watches

According to the Garter report, smartwatches are considered the most prevalent wearable devices [54]. Based on their functionality, smartwatches are divided into two categories: first, for communication purposes such as sending messages, emails, and phone calls; and second, for healthcare related services, such as sending human biometric data to healthcare centers (e.g., pulse rate and body temperature [32]), tracking heart rate, and tracking burned calories and step count [55]. After several studies, it was found that smart watches are mainly applied in healthcare applications that are related to health monitoring or for monitoring senior citizens [56], such as fall detection, and also for chronic diseases monitoring and medication [57]. In the current period of the pandemic, these watches are used to control and prevent infectious diseases from spreading; for example, hand washing can effectively control the spread of viral diseases. Moreover, in [58], a handwashing assessment system was developed that is based on a smartwatch with Bluetooth beacons to control the spread.

3.5. Smart Glasses

Smart glasses are also significant IoT based wearables that play an important role in the healthcare IoT. As compared to other thermometers, these glasses do not have much interaction with humans. In these glasses, optical or thermal cameras are applied to monitor the activity of crowds [59] or to detect and trace a suspected person with high temperature, and its detection technology makes it more reliable. There are several smart glasses present in the market that can monitor different numbers of people, such as Rokid smart glasses [60], that can trace and monitor a group of 200 people. These glasses are used in combination with a camera as well. These glasses are helpful for authorities and healthcare staff during the spread of viral diseases such as Ebola, which is spread from person to person by body fluids via the eyes and other body parts [61]. Similarly, these glasses were helpful in monitoring crowds and assisting doctors and patients in order to protect them from COVID-19 and other diseases.

3.6. Smart Jacket

A smart jacket is also an important wearable from the intelligent garments category. It contains a combination of sensors and a wireless platform that are used to monitor oxygen saturation, breathing rate, and some other safety purposes. In [62], a smart sensor-based outdoor jacket was designed that is connected to a smartphone application system to monitor fall detection, emergency calls, heartbeat monitoring, body temperature, and breathing rate. The first COVID fight jacket available in the market is Covest [18], which has a built-in mask, sensors for social distancing, and a built-in thermometer for monitoring body temperature. Similarly, a new smart jacket is also available in the market named Mamaope [19], which monitors individuals affected by pneumonia in a more accurate way. This wearable consists of several sensors to monitor the heartbeat, body temperature, lung sounds, O 2 sats, and breathing. The smart jacket is also widely used in industrial environments for workers’ safety. The research in [63] developed a sensor-based jacket that worked with wireless technologies to monitor the workers and hazards that occur during working and ensured safety in advance.

3.7. Smart Socks

The word smart socks was initially used in the literature in 2005, and it has gained popularity in smart wearable devices as a way to capture motion-related information [64]. Foot wearables are embedded with one or a combination of sensors for the purpose of collecting data and communicating between these devices for the analysis of data. Smart IOT based socks are comfortable and easy to wear [65]. Currently, these socks are widely used in healthcare and fitness-related services. According to research, every 1.2 s, diabetic foot wounds cause an infection in patients [66]. For such patients, the SirenCare Company developed smart socks that help to detect diabetic injury and control wound infection and also monitor the user movements [67]. Smart socks are also used to monitor the temperature of the human body; the authors in [68] presented a smart socks system that monitored diabetic patients’ body temperature. Smart socks are also very useful for Parkinson’s patients. Other commercially available smart socks are Owlet and Baby Vida, which are worn on a baby’s feet to monitor the pulse rate and oxygen level with the application of Bluetooth technology [69,70].

3.8. Data Gloves

Gloves are the most crucial and commonly used hand wearables that provide safety to hands from different hazardous conditions. Smart gloves are armed with different sensors and technologies. The use of technology in these hand wearables is not new; the concept started approximately four decades ago [71]. The main task of these gloves is to help people manipulate and touch things in a more safe and direct way. There are different types of devices that are applied with these smart gloves that are small, lightweight, and easy to carry. Smart gloves are also applied in the healthcare sector for different purposes, such as patient rehabilitation, vital surgery, etc. The authors in [72] presented smart gloves that were composed of electrochemical biosensors and used as screening tools and defense tools. The most important use of these gloves is for patients that are affected by joint and movement related diseases such as rheumatoid arthritis and Parkinson’s. Rheumatoid arthritis is a joint disease that mainly affects the older population who need therapies and regular medication. For such types of patients [73], a smart gloves system was developed to observe and monitor the joints of such patients. During COVID-19, Keltic developed the anti-COVID touchscreen smart gloves, also known as COVID-19 gloves. According to Keltic, these touchscreen smart gloves are not only antiviral but also anti-bacterial [15,20].

3.9. Smart Mask

Face masks are considered as as primary measure to fight against airborne pathogens, similar to other precautions [74]. In order to avoid the spread of infectious diseases, distancing, washing hands, and quarantine are required [75]. For this purpose, the digitalization of a mask during a pandemic plays a vital role in personal safety in the present connected IOT era. In the current scenario of a pandemic, the smart mask has gained popularity. The authors in [76] present an idea to digitalize the smart mask, making it safer, improving the wearable safety to fight against infectious disease spreading from respiratory or aerosol droplets, and performing real-time data analysis to enhance the individual safety in a timely manner. The smart wearable mask in general is a combination of several technologies, such as filtering mechanisms, sensors, and material [77]. Similarly, the smart mask developed in [76] is also a mix of changeable filters, wireless sensors, rechargeable batteries, mobile applications, and real-time analysis mechanisms. A mask was developed by a research team at the University of California for the detection of proteases that are mainly enzymes and enhance the breakage of COVID-19 virus proteins [78]. A variety of smart masks are available in the market, such as Xiaomi Purely Mask, G-Volt mask, and Pure care smart mask; among all of these, the G-Volt mask gives the best filtration efficiency, at 99%.

3.10. Smart Stethoscope

A stethoscope is a medical device that is applied to the human body for the purpose of auscultation and transmits these data to the healthcare provider. The stethoscope is utilized to trace out a variety of health-related issues, such as flu, heart beat, stomach sounds, and many more. For this technology, the correct position for application to the human body is very important. For this purpose, the authors in [79] developed a smart stethoscope that only gives sounds when it is applied correctly on the body. Another smart wearable stethoscope, designed in [80], is a combination of sensors, with a Littmann 3200 stethoscope, embedded in a vest and placed on the human torso to hear breathing and cough sounds, and it was very helpful during COVID-19 type pandemics in which human respiratory system monitoring is a major issue. Lungs auscultation is a very crucial task during a respiratory-type pandemic. Similarly, in [81], a smart stethoscope system takes and merges different sensing parameters, such as sense background noise, breathing rate, ECG, and individual actigraphy. This wearable stethoscope patch is very helpful to perform auscultation without any gaps, and it does not need any type of sensors on different body parts for the purpose of auscultation. Another smart AI-based smart stethoscope developed by the Johns Hopkins University team that listens to lung sounds has the ability to detect pneumonia. A large variety of smart stethoscopes are available on the market, such as RESP, Stemoscope [82].

3.11. Smart Ring

The smart ring is a digital wearable that was first launched in 2013 [83] and is used with integrated functions of mobile phones, similar to a common wearable ring, or it may be large in size. It is used for several purposes such as activity monitoring, payments, home appliances control, and making phone calls and also plays a significant role in the healthcare sector by monitoring vital health signs, such as pulse rate, body temperature, respiration rate [84], sleep, movements, oxygen level, and many more. A variety of smart rings are available on the market, such as the Oura Ring, which monitors individual sleep and helps the wearer to make appropriate adjustments to sleep. Oura is a wearable metallic ring, a combination of very small sensors, used to observe health-related information such as breathing, temperature, and pulse rate [85]. For the most part, such parameters are observed for viral diseases such as cold, flu, and COVID-19. The first outbreak of SARS was in 2003, MERS was in 2012, and SARS-Cov-2 is the most recent viral disease wave, with worldwide approximately 340 million cases and 5.57 million deaths [86]. For such types of parameters as cited above, the Oura ring has the potential to trace out symptoms of COVID-19 at the home level and detect common symptoms of COVID-19 virus with an accuracy of near to 90%. It has a battery timing of 1 week with a one-time charging of 20–28 min [85].

3.12. Smart Belt

One more generally used wearable sensor and IOT based medical device [87] for the healthcare sector is the smart belt. It is applied to different body parts for several monitoring purposes, such as for movement, ECG, body temperature, respiratory rate, heartbeat [87,88], breathing rate, fall detection, sleep, body parts postures, distance, and many more. The authors in [89] proposed a smart belt-based system to estimate social distance and temperature in order to mitigate COVID-19 effects and reduce the spread from person to person by keeping a social distance of 1 m. When an individual is near to 1 m or less, the smart belt generates an alarm and sends the distance and temperature of the nearer body to another system via Blynk software with help of IoT. These cost-effective sensor-based belt help to reduce COVID-19 spread. Similarly, other work done in [90] helps to monitor the heartbeat and respiration rate while the user is sitting, standing, or walking.

3.13. Smart Patches

Smart patches, or E-patches, are wearable sensors that are commonly used in healthcare and applied to the patient’s skin [91]. These are tiny in size, lightweight, and can monitor the pulse rate, respiration rate, oxygen level, body temperature, and ECG [92]. The authors in [93] presented a smart patch that is a combination of different wireless, self-powered technologies for the purpose of recording body temperature and activities. Another smart patch was developed in [94] that monitors blood pressure by applying ECG and FPS sensors, giving real-time results. Similarly, the wearable patch is also used for glucose sampling purposes. During a pandemic, the main symptoms are high temperature, BP, respiratory rate, pulse rate, and breathing, among others. In order to monitor symptoms of COVID-19, a variety of patches are available on the market. Examples include the RespiraSense patch that monitors respiratory rate; the Life Signals patch that detects parameters such as respiratory rate, heart beat, temperature, and ECG; and the VitalConnect patch that can detect falling pulse rate, respiratory rate, temperature, and body activities [92].

3.14. Smart Contact Lens

Soft or smart contact lenses are the most prominent eye wearables that help to monitor the eyes’ physiological functions. In recent years, these eye wearables have gained great attention in the healthcare sector for monitoring purposes commercially [95,96]. The first smart contact lens named Triggerfish was commercially available in 2016 for the purpose of monitoring glaucoma patients continuously for 24 h [96]. Various soft contact lenses are available that work on the base of optical or electrical mechanisms, embedded with sensors to observe eye fluids. Other work [97] helped to continuously monitor glucose and diabetic retinopathy. The smart lens is also used to provide continuous delivery of drugs in the eyes for glaucoma patients; for example, the Leo Lens smart drug delivery system for eyes. Smart lenses are also applied to overcome and decrease eye allergies [98].

3.15. Smart Nutrition System

Wearable technology is also used to monitor diabetic patients’ dietary intake. A piezoelectric necklace nutrition monitoring system uses an algorithm to distinguish between liquid and solid intake and identify swallows [11]. Based on the outcome, this device can distinguish between solid and liquid meals. In [99], a new method for predicting future glucose concentration levels is described, employing data from a continuous glucose monitoring (CGM) device and a recurrent neural network (RNN). Using these predicted glucose levels, early hypoglycemia/hyperglycemia warnings can be issued to establish acceptable dosages of insulin.

3.16. Smart Mood Monitoring System

A smart monitoring device can be utilized to keep track of a patient’s emotional condition. Moreover, it assists health specialists to treat mental ailments such as depression, bipolar disorder, etc. According to [100], a CNN network is used to analyze six different person’s moods. Other research [101] demonstrated the significance of happiness in making decisions and helped policymakers discover the critical elements that define a person’s pleasure. With the integration of advanced and machine learning systems, stress may now be identified in advance using heart rate, and the system can determine patient‘s stress level [102].

3.17. Smart Rehabilitation System

IoT devices also play a vital role in the rehabilitation of patients. In [103], a clever framework called Smart Pants was proposed for the home rehabilitation of post-stroke patients. In order to determine how the patient’s weight was distributed, four biosensors were fastened to the patient’s body with plastic bands, and a pressure sensor was fastened to the patient’s feet. With the help of this sensor’s arrangement, patients’ correct posture for exercises was supervised and alerts were generated if necessary. Five of the most popular types of exercise for stroke survivors can be measured and processed by the suggested approach. The framework can then use ML techniques such as random forest, random tree, naive Bayes, and multilayer perceptron to categorize the 64 attributes that were gathered from the sensors.

3.18. COVID-19 Detection System

With the use of IoT devices, difficult circumstances can be managed and controlled, such as the one in 2020 when the coronavirus epidemic (COVID-19) swept the globe [104]. The wearable sensor connected to an edge node in the IoT cloud to determine the condition of the body’s health. The suggested system is constructed with three layered functionalities: an Android web layer for mobile devices, a cloud layer using application peripheral interface (API), and a layer of wearable IoTs sensors. Data are processed for determining symptoms from the IoT sensor layer. For precautions, warnings, and immediate answers, the information is kept in the cloud database. Finally, the patient’s family is informed through alarms sent by the Android mobile application layer [18,19,47]. The brief comparison of wearable devices for monitoring, detection, and prevention of diseases and products is shown in Table 2.

4. Issues and Challenges in Medical Wearable Devices

Issues and Challenges in Medical Wearable Devices. These advancements have a tremendous impact on ordinary people’s lives and habits [110]. As the popularity of these devices increases day by day and becomes a part of daily life, there arise some issues and challenges that need to be discussed here before investing or purchasing.

4.1. Environment Condition

Extreme temperature and humidity values should not affect the wearable device’s performance, function, and durability [111]. For example, the device should be waterproof and also respond to sunshine or rainfall. In the design and development phase, perspiration of users should be considered.

4.2. Comfort

The presence of the wearable device on the user’s body should never be felt. The device should conform only those body parts where it is planted and should be flexible enough to allow the user to move freely.

4.3. Self-Governing

The device modules should work independently without human participation. These intelligent devices should be able to make their own decisions and are linked to the internet.

4.4. Compact

To make the wearable smart device easier to carry, it should be made as small as possible. The device should not be heavyweight and inconvenient for the user.

4.5. Ergonomics

While making the design of smart wearables, their physical appearance and their connection with the human body in motion must be considered carefully. The device should not obstruct the movement of the body. Headsets, finger rings, glasses, arm bands, fabrics, wrist bands, and smart patches are all worn on the body.

4.6. Size/Weight

Wearable devices should be small, light-weight, optimized, and reliable [32]. The weight should not exceed more than a few grams. Moreover, flexibility issues in units should be considered so that they can easily bend. For this purpose, flexible printed circuit board (PCB) designs with all of the circuitry well integrated into the PCB have been adopted. PCBs that are flexible exhibit good robustness and are heat-resistant.

4.7. Attachment to Body

This refers to the unit’s attachment to the body. It should not hurt the person or cause any adverse effects. For example, smart devices should not be detached in case of accidental impacts. The use of biocompatible adhesives that do not irritate the user is required. Biocompatibility is required for every piece of medical equipment that comes into contact with the body. Biocompatible materials must be stable in a physiological environment and show no signs of degradation. They must be coated with non-toxic substances to behave as an insulator. In order to prevent tissue and nerve damage, materials must have smooth surfaces. They should be flexible but not stiff for easy adhesion to soft body tissues. Surgical steel, gold, some types of ceramics, glasses, and molding plastics are considered biocompatible materials. In addition, implanted devices should be hermetically sealed to prevent the entrance of body liquids and the escape of chemicals [112]. In addition, biocompatible materials must be used for the device’s outer shell. Biocompatibility is required to safeguard both the device and the patient.

4.8. Device and Body Safety

The user should not be harmed by the device nor should the device itself be damaged. The system must have built-in safety procedures. Some of the potential risks associated with wearable technology are discussed in Table 3. Although smart wearable technology-based devices have the potential to significantly improve a user’s lifestyle, they also carry a number of hazards.

4.9. Accessibility

The device should be accessible to both users and healthcare professionals for monitoring, maintenance, and data readings. This also refers to the device’s ability to get data from the body with ease.

4.10. Sensory Interaction

Sensors should be simple and easy to use and apply [113].

4.11. Heat Effects

The device may be damaged if it becomes too hot. As a result, the device must be protected from excessive heat. Safety measures shall be noted in the way so that the user can be safe from any type of harm.

4.12. Reliability

Malfunctions and false alarms are important problems that must be avoided in the long term [114]. Before the device is put to use, endurance tests must be performed. Medical devices, especially those that are life-sustaining, must be extremely reliable. The product’s life can be extended to almost 5 years. However, implantable devices cannot be repaired but replaced in case of failure. With more patient wearable devices, the requirement for device robustness is growing. Many of these devices are used continuously, 24/7. Shock, vibration, dropping, overuse, perspiration, filth, pollutants, and water are among the factors that they face (shower, bath, or pool). As these medical devices are mostly used by patients themselves, the operational commands must be simple and non-technical for patients to operate the products safely and successfully. The mechanism itself must be simple to use, similar to child-resistant closures on pharmaceutical bottles. Patients with limited hand, eyesight, or mental capacity must be able to operate the device independently.

4.13. Side Effects

The human organs shall be safe and secured from wearable devices, which means there should be no side effects. In the long term, the device shall not harm the users.

4.14. High Power Consumption

Almost all of these devices run on batteries. Therefore, it is better to use small rechargeable battery cells in a device, and it must have wireless connectivity. Low-power CMOS and high-efficiency mechanical pumps can help reduce power consumption by continuously keeping equipment in sleep mode.

4.15. Wearable/Implantable

Batteries are commonly used as the primary power source for wearable or implanted medical devices. The cost of wearable devices depends on battery life. Although rechargeable batteries are available for wearable devices, implanted devices rely on batteries as their primary source of power, and their replacement is done through a surgical procedure. However, an alternative approach is inductive charging, but the user/patient needs to be in contact with a charging device at all times, which is itself dangerous. Normally, a rechargeable battery must last for at least 8 h of normal use before needing to be recharged [115].

4.16. Normalization

There is a very large number of manufacturers working on a wide range of wearable devices. These manufacturers have set their own set of rules and designs for a device. As a result, they are incompatible with one another. This is a serious issue that requires attention. All devices should be normalized or standardized.

4.17. Information Privacy and Security

Almost all wearable devices, such as Bluetooth, Zigbee, and NFC, function in a network. These networks are vulnerable to cyber-attacks when connected normally. These wearable devices do not provide security for personal information such as identification and health status [116]. As a result, a secure technique must be built on these devices and networks in order to protect any information.

5. Conclusions

The implementation of Internet of Things technology in healthcare systems is one viable technique for alleviating the aforementioned challenges. The Medical Internet of Things is predicted to bridge many technologies in the next years to enable new applications by linking physical items to enhance intelligent decision-making in the medical sector. The IoT has the ability to reduce the burden on sanitary systems while also offering customized health services to expand people’s quality of life. Smart medical device-based health management systems have the potential to improve healthcare’s overall performance. Therefore, in this paper, the most trending IoT applications and medical wearables utilized in the modern era for the detection and prevention of multiple diseases are discussed and compared. Moreover, the authors have thoroughly elaborated on the challenges associated with these medical wearables that must be considered for designing better wearable devices and achieving improved healthcare services in the future. The paper has also thoroughly covered the latest diseases such as COVID-19 and monkeypox.

Author Contributions

Conceptualization, A.M. and S.N.; Methodology, U.H. and M.Z.I.; Software, S.N. and F.S.; Validation, U.H. and S.N.; Formal analysis, A.M. and S.N.; Case studies, M.B.M.S. and A.M.; Resources, M.Z.I. and M.B.M.S.; Data curation, M.M.A. and F.S.; Writing—original draft preparation, F.S. and A.M.; Writing—review and editing, S.N. and M.Z.I.; Visualization, M.B.M.S.; Supervision, M.M.A. All authors have read and agreed to the published version of the manuscript.

Funding

This research received no external funding.

Institutional Review Board Statement

Not applicable.

Informed Consent Statement

Not applicable.

Data Availability Statement

Not applicable.

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. Tahir, H.; Tahir, R.; McDonald-Maier, K. On the security of consumer wearable devices in the Internet of Things. PLoS ONE 2018, 13, e0195487. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  2. Ye, S. Omdia: China’s healthcare equipment market to hit 600USD by 2025. Omnia Health 2021, 1. Available online: https://insights.omnia-health.com/market-updates/omdia-chinas-healthcare-equipment-market-hit-600bn-2025 (accessed on 6 September 2021).
  3. Yuehong, Y.; Zeng, Y.; Chen, X.; Fan, Y. The internet of things in healthcare: An overview. J. Ind. Inf. Integr. 2016, 1, 3–13. [Google Scholar]
  4. Saarikko, T.; Westergren, U.H.; Blomquist, T. The Internet of Things: Are you ready for what’s coming? Bus. Horizons 2017, 60, 667–676. [Google Scholar] [CrossRef]
  5. Dang, L.M.; Piran, M.J.; Han, D.; Min, K.; Moon, H. A survey on internet of things and cloud computing for healthcare. Electronics 2019, 8, 768. [Google Scholar] [CrossRef] [Green Version]
  6. Mistry, I.; Tanwar, S.; Tyagi, S.; Kumar, N. Blockchain for 5G-enabled IoT for industrial automation: A systematic review, solutions, and challenges. Mech. Syst. Signal Process. 2020, 135, 106382. [Google Scholar] [CrossRef]
  7. Chehri, A.; Mouftah, H.T. Internet of Things-integrated IR-UWB technology for healthcare applications. Concurr. Comput. Pract. Exp. 2020, 32, e5454. [Google Scholar] [CrossRef]
  8. Farahat, I.; Tolba, A.; Elhoseny, M.; Eladrosy, W. A secure real-time internet of medical smart things (IOMST). Comput. Electr. Eng. 2018, 72, 455–467. [Google Scholar] [CrossRef]
  9. Hiremath, S.; Yang, G.; Mankodiya, K. Wearable Internet of Things: Concept, architectural components and promises for person-centered healthcare. In Proceedings of the 2014 4th International Conference on Wireless Mobile Communication and Healthcare-Transforming Healthcare Through Innovations in Mobile and Wireless Technologies (MOBIHEALTH), Athens, Greece, 3–5 November 2014; pp. 304–307. [Google Scholar]
  10. Poongodi, T.; Krishnamurthi, R.; Indrakumari, R.; Suresh, P.; Balusamy, B. Wearable devices and IoT. In A Handbook of Internet of Things in Biomedical and Cyber Physical System; Springer: Berlin/Heidelberg, Germany, 2020; pp. 245–273. [Google Scholar]
  11. Surantha, N.; Atmaja, P.; Wicaksono, M. A review of wearable internet-of-things device for healthcare. Procedia Comput. Sci. 2021, 179, 936–943. [Google Scholar] [CrossRef]
  12. Schrader, L.; Vargas Toro, A.; Konietzny, S.; Rüping, S.; Schäpers, B.; Steinböck, M.; Krewer, C.; Müller, F.; Güttler, J.; Bock, T. Advanced sensing and human activity recognition in early intervention and rehabilitation of elderly people. J. Popul. Ageing 2020, 13, 139–165. [Google Scholar] [CrossRef] [Green Version]
  13. Cao, Z.; Zhu, R.; Que, R.Y. A wireless portable system with microsensors for monitoring respiratory diseases. IEEE Trans. Biomed. Eng. 2012, 59, 3110–3116. [Google Scholar] [PubMed]
  14. Channa, A.; Popescu, N.; Skibinska, J.; Burget, R. The rise of wearable devices during the COVID-19 pandemic: A systematic review. Sensors 2021, 21, 5787. [Google Scholar] [CrossRef] [PubMed]
  15. Ali, A.; Nisar, S.; Khan, M.A.; Mohsan, S.A.H.; Noor, F.; Mostafa, H.; Marey, M. A Privacy-Preserved Internet-of-Medical-Things Scheme for Eradication and Control of Dengue Using UAV. Micromachines 2022, 13, 1702. [Google Scholar] [CrossRef] [PubMed]
  16. Liu, X. Real-world data for the drug development in the digital era. J. Artif. Intell. Technol. 2022, 2, 42–46. [Google Scholar] [CrossRef]
  17. Masood, F.; Masood, J.; Zahir, H.; Driss, K.; Mehmood, N.; Farooq, H. Novel Approach to Evaluate Classification Algorithms and Feature Selection Filter Algorithms using Medical Data. J. Comput. Cogn. Eng. 2022, 1, 1. [Google Scholar] [CrossRef]
  18. Nisar, S.; Zuhaib, M.A.; Ulasyar, A.; Tariq, M. A privacy-preserved and cost-efficient control scheme for coronavirus outbreak using call data record and contact tracing. IEEE Consum. Electron. Mag. 2020, 10, 104–110. [Google Scholar] [CrossRef]
  19. Nisar, S.; Wakeel, A.; Tahir, W.; Tariq, M. Minimizing Viral Transmission in COVID-19 Like Pandemics: Technologies, Challenges, and Opportunities. IEEE Sens. J. 2022. [Google Scholar] [CrossRef]
  20. Nisar, S.; Zuhaib, M.A.; Ulasyar, A.; Tariq, M. A robust tracking system for COVID-19 like pandemic using advanced hybrid technologies. Computing 2021, 1–15. [Google Scholar] [CrossRef]
  21. Giovanni, P. Francesco Pegreffi1, Ivan Julio Salce Cutipa2; Michael Anthonius Lim3, Domenico Topa4, Angela Maietta Latessa5. In Quaderni di Diritto delle Attività motorie e Sportive; Bononia University Press: Bologna, Italy, 2022; p. 39. [Google Scholar]
  22. Istepanian, R.S.; Hu, S.; Philip, N.Y.; Sungoor, A. The potential of Internet of m-health Things “m-IoT” for non-invasive glucose level sensing. In Proceedings of the 2011 Annual International Conference of the IEEE Engineering in Medicine and Biology Society, Boston, MA, USA, 30 August–3 September 2011; pp. 5264–5266. [Google Scholar]
  23. Drew, B.J.; Califf, R.M.; Funk, M.; Kaufman, E.S.; Krucoff, M.W.; Laks, M.M.; Macfarlane, P.W.; Sommargren, C.; Swiryn, S.; Van Hare, G.F. Practice standards for electrocardiographic monitoring in hospital settings: An American Heart Association scientific statement from the Councils on Cardiovascular Nursing, Clinical Cardiology, and Cardiovascular Disease in the Young: Endorsed by the International Society of Computerized Electrocardiology and the American Association of Critical-Care Nurses. Circulation 2004, 110, 2721–2746. [Google Scholar]
  24. Islam, S.R.; Kwak, D.; Kabir, M.H.; Hossain, M.; Kwak, K.S. The internet of things for health care: A comprehensive survey. IEEE Access 2015, 3, 678–708. [Google Scholar] [CrossRef]
  25. Alshamrani, M. IoT and artificial intelligence implementations for remote healthcare monitoring systems: A survey. J. King Saud-Univ.-Comput. Inf. Sci. 2021, 34, 4687–4701. [Google Scholar] [CrossRef]
  26. Kang, J.J.; Larkin, H. Intelligent personal health devices converged with internet of things networks. J. Mob. Multimed. 2017, 12, 197–212. [Google Scholar]
  27. Zhang, L.Z. Patient Body Temperature Monitoring System and Device Based on Internet of Things. Chinese Patent CN103577688A, 12 February 2014. [Google Scholar]
  28. Jian, Z.; Zhanli, W.; Zhuang, M. Temperature Measurement System and Method Based on Home Gateway. Chinese Patent CN201110148247, 5 December 2012. [Google Scholar]
  29. Milacski, Z.Á.; Ludersdorfer, M.; Lőrincz, A.; Smagt, P.v.d. Robust detection of anomalies via sparse methods. In Proceedings of the International Conference on Neural Information Processing, Istanbul, Turkey, 9–12 November 2015; pp. 419–426. [Google Scholar]
  30. Jara, A.J.; Zamora-Izquierdo, M.A.; Skarmeta, A.F. Interconnection framework for mHealth and remote monitoring based on the internet of things. IEEE J. Sel. Areas Commun. 2013, 31, 47–65. [Google Scholar] [CrossRef]
  31. Larson, E.C.; Goel, M.; Boriello, G.; Heltshe, S.; Rosenfeld, M.; Patel, S.N. SpiroSmart: Using a microphone to measure lung function on a mobile phone. In Proceedings of the 2012 ACM Conference on Ubiquitous Computing, Pittsburgh, PA, USA, 5–8 September 2012; pp. 280–289. [Google Scholar]
  32. Pang, Z.; Tian, J.; Chen, Q. Intelligent packaging and intelligent medicine box for medication management towards the Internet-of-Things. In Proceedings of the 16th International Conference on Advanced Communication Technology, Pyeongchang, Republic of Korea, 16–19 February 2014; pp. 352–360. [Google Scholar]
  33. Laranjo, I.; Macedo, J.; Santos, A. Internet of Things for medication control: E-health architecture and service implementation. Int. J. Reliab. Qual. Healthc. 2013, 2, 1–15. [Google Scholar] [CrossRef]
  34. Fan, Y.J.; Yin, Y.H.; Da Xu, L.; Zeng, Y.; Wu, F. IoT-based smart rehabilitation system. IEEE Trans. Ind. Inform. 2014, 10, 1568–1577. [Google Scholar]
  35. Yang, G.; Deng, J.; Pang, G.; Zhang, H.; Li, J.; Deng, B.; Pang, Z.; Xu, J.; Jiang, M.; Liljeberg, P.; et al. An IoT-enabled stroke rehabilitation system based on smart wearable armband and machine learning. IEEE J. Transl. Eng. Health Med. 2018, 6, 2100510. [Google Scholar] [CrossRef]
  36. Nazir, S.; Ali, Y.; Ullah, N.; García-Magariño, I. Internet of things for healthcare using effects of mobile computing: A systematic literature review. Wirel. Commun. Mob. Comput. 2019, 2019, 5931315. [Google Scholar] [CrossRef]
  37. Green, M.S.; Mathew, J.J.; Gundigi Venkatesh, A.; Green, P.; Tariq, R. Utilization of smartphone applications by anesthesia providers. Anesthesiol. Res. Pract. 2018, 2018, 8694357. [Google Scholar] [CrossRef] [Green Version]
  38. Dsouza, D.J.; Srivatsava, S.; Prithika, R. IoT based smart wheelchair for HealthCare. Int. J. Recent. Technol. Eng. 2019, 8, 534–539. [Google Scholar] [CrossRef]
  39. Taiwo, O.; Ezugwu, A.E. Smart healthcare support for remote patient monitoring during COVID-19 quarantine. Inform. Med. Unlocked 2020, 20, 100428. [Google Scholar] [CrossRef]
  40. Qadri, Y.A.; Nauman, A.; Zikria, Y.B.; Vasilakos, A.V.; Kim, S.W. The future of healthcare internet of things: A survey of emerging technologies. IEEE Commun. Surv. Tutor. 2020, 22, 1121–1167. [Google Scholar] [CrossRef]
  41. Cosoli, G.; Spinsante, S.; Scardulla, F.; D’Acquisto, L.; Scalise, L. Wireless ECG and cardiac monitoring systems: State of the art, available commercial devices and useful electronic components. Measurement 2021, 177, 109243. [Google Scholar] [CrossRef]
  42. Okazaki, K.; Okazaki, K.; Uesugi, M.; Matsusima, T.; Hataya, H. Evaluation of the accuracy of a non-invasive hemoglobin-monitoring device in schoolchildren. Pediatr. Neonatol. 2022, 63, 19–24. [Google Scholar] [CrossRef]
  43. Lu, L.; Zhang, J.; Xie, Y.; Gao, F.; Xu, S.; Wu, X.; Ye, Z. Wearable health devices in health care: Narrative systematic review. JMIR mHealth uHealth 2020, 8, e18907. [Google Scholar] [CrossRef]
  44. Zhang, G.J. Internet-of-Things Human Body Data Blood Pressure Collecting and Transmitting Device. Chinese Patent CN202821362U, 27 March 2013. [Google Scholar]
  45. Chamberlain, S.D.; Singh, I.; Ariza, C.; Daitch, A.; Philips, P.; Dalziel, B.D. Real-time detection of COVID-19 epicenters within the United States using a network of smart thermometers. MedRxiv 2020. [Google Scholar] [CrossRef]
  46. Grande, D.; Mitra, N.; Marti, X.L.; Merchant, R.; Asch, D.; Dolan, A.; Sharma, M.; Cannuscio, C. Consumer views on using digital data for COVID-19 control in the United States. JAMA Netw. Open 2021, 4, e2110918. [Google Scholar] [CrossRef]
  47. Javaid, M.; Khan, I.H. Internet of Things (IoT) enabled healthcare helps to take the challenges of COVID-19 Pandemic. J. Oral Biol. Craniofacial Res. 2021, 11, 209–214. [Google Scholar] [CrossRef]
  48. Sampson, M.; Hickey, V.; Huber, J.; Davila, P.; Eager, J.; Davies, S.; Dandoy, C. Continuous Temperature Monitoring in the Inpatient Setting Using Temptraq. In Pediatric Blood & Cancer; Wiley: Hoboken, NJ, USA, 2018; Volume 65. [Google Scholar]
  49. Tamura, T.; Huang, M.; Togawa, T. Current developments in wearable thermometers. Adv. Biomed. Eng. 2018, 7, 88–99. [Google Scholar] [CrossRef] [Green Version]
  50. Mohammed, M.; Syamsudin, H.; Al-Zubaidi, S.; AKS, R.R.; Yusuf, E. Novel COVID-19 detection and diagnosis system using IOT based smart helmet. Int. J. Psychosoc. Rehabil. 2020, 24, 2296–2303. [Google Scholar]
  51. Nasajpour, M.; Pouriyeh, S.; Parizi, R.M.; Dorodchi, M.; Valero, M.; Arabnia, H.R. Internet of Things for current COVID-19 and future pandemics: An exploratory study. J. Healthc. Inform. Res. 2020, 4, 325–364. [Google Scholar] [CrossRef]
  52. Grzesiak, E.; Bent, B.; McClain, M.T.; Woods, C.W.; Tsalik, E.L.; Nicholson, B.P.; Veldman, T.; Burke, T.W.; Gardener, Z.; Bergstrom, E.; et al. Assessment of the feasibility of using noninvasive wearable biometric monitoring sensors to detect influenza and the common cold before symptom onset. JAMA Netw. Open 2021, 4, e2128534. [Google Scholar] [CrossRef] [PubMed]
  53. Masood, A.; Khan, K.B.; Younas, T.; Khalid, A.R. Design of wearable prototype smart wristband for remote health monitoring using Internet of things. In Proceedings of the International Conference on Intelligent Technologies and Applications, Durham, UK, 10–12 July 2019; pp. 3–13. [Google Scholar]
  54. Bohr, A.; Memarzadeh, K. Current healthcare, big data, and machine learning. In Artificial Intelligence in Healthcare; Elsevier: Amsterdam, The Netherlands, 2020; pp. 1–24. [Google Scholar]
  55. Gruenerbl, A.; Pirkl, G.; Monger, E.; Gobbi, M.; Lukowicz, P. Smart-watch life saver: Smart-watch interactive-feedback system for improving bystander CPR. In Proceedings of the 2015 ACM International Symposium on Wearable Computers, Osaka, Japan, 7–11 September 2015; pp. 19–26. [Google Scholar]
  56. Issa, B.A.; Thabit, Q.Q. Review in IoT for Healthcare in Our Life. Iraqi J. Electr. Electron. Eng. 2021, 18, 9–20. [Google Scholar] [CrossRef]
  57. Sriramalakshmi, P.; Vondivillu, S.T.; Govind, A.S.K. Role of IoT, AI, and Big Data Analytics in Healthcare Industry. In Transformation in Healthcare with Emerging Technologies; Chapman and Hall/CRC: Boca Raton, FL, USA, 2022; pp. 19–43. [Google Scholar]
  58. Samyoun, S.; Shubha, S.S.; Mondol, M.A.S.; Stankovic, J.A. iWash: A smartwatch handwashing quality assessment and reminder system with real-time feedback in the context of infectious disease. Smart Health 2021, 19, 100171. [Google Scholar] [CrossRef] [PubMed]
  59. Udgata, S.K.; Suryadevara, N.K. Advances in sensor technology and IOT framework to mitigate COVID-19 challenges. In Internet of Things and Sensor Network for COVID-19; Springer: Berlin/Heidelberg, Germany, 2021; pp. 55–82. [Google Scholar]
  60. Steindler, D. Protection of Personal Data in Healthcare and New Technologies; Právnická Fakulta, Univerzita Karlova: Stare Mesto, Czech Republic, 2022. [Google Scholar]
  61. Mohammed, H.M. Ebola virus disease: Effects of respiratory protection on healthcare workers. Egypt. J. Chest Dis. Tuberc. 2015, 64, 639–644. [Google Scholar] [CrossRef] [Green Version]
  62. Lee, H.; Baek, K. Developing a smart multifunctional outdoor jacket with wearable sensing technology for user health and safety. Multimed. Tools Appl. 2021, 80, 32273–32310. [Google Scholar] [CrossRef]
  63. Gorli, R. Smart Jacket for Industrial Employee Health and Safety. Int. J. Sci. Res. Comput. Sci. Eng. Inf. Technol. 2017, 2, 390–392. [Google Scholar]
  64. Jovanov, E.; Milenkovic, A.; Otto, C.; De Groen, P.C. A wireless body area network of intelligent motion sensors for computer assisted physical rehabilitation. J. Neuroeng. Rehabil. 2005, 2, 6. [Google Scholar] [CrossRef]
  65. Oks, A.; Katashev, A.; Bernans, E.; Abolins, V. Smart socks system as an equipment to analyze temporal parameters of human gait and running. In Proceedings of the Environment. Technologies. Resources, Proceedings of the International Scientific and Practical Conference, Rezekne, Latvia, 15–17 June 2017; Volume 3, pp. 238–241. [Google Scholar]
  66. Armstrong, D.G.; Boulton, A.J.; Bus, S.A. Diabetic foot ulcers and their recurrence. N. Engl. J. Med. 2017, 376, 2367–2375. [Google Scholar] [CrossRef]
  67. Balmain, B.N.; Tuttle, N.; Bailey, J.; Cheng, K.; Duryea, M.; Houlihan, J.; Wotherspoon, J.; Morris, N. Using smart socks to detect step-count at slow walking speeds in healthy adults. Int. J. Sport. Med. 2019, 40, 133–138. [Google Scholar] [CrossRef] [Green Version]
  68. Torreblanca González, J.; Gómez-Martín, B.; Hernández Encinas, A.; Martín-Vaquero, J.; Queiruga-Dios, A.; Martínez-Nova, A. The use of infrared thermography to develop and assess a wearable sock and monitor foot temperature in diabetic subjects. Sensors 2021, 21, 1821. [Google Scholar] [CrossRef]
  69. Dangerfield, M.I.; Ward, K.; Davidson, L.; Adamian, M. Initial experience and usage patterns with the owlet smart sock monitor in 47,495 newborns. Glob. Pediatr. Health 2017, 4, 2333794X17742751. [Google Scholar] [CrossRef] [Green Version]
  70. Bonafide, C.P.; Jamison, D.T.; Foglia, E.E. The emerging market of smartphone-integrated infant physiologic monitors. JAMA 2017, 317, 353–354. [Google Scholar] [CrossRef] [PubMed]
  71. Caeiro-Rodríguez, M.; Otero-González, I.; Mikic-Fonte, F.A.; Llamas-Nistal, M. A systematic review of commercial smart gloves: Current status and applications. Sensors 2021, 21, 2667. [Google Scholar] [CrossRef] [PubMed]
  72. Mishra, R.K.; Hubble, L.J.; Martín, A.; Kumar, R.; Barfidokht, A.; Kim, J.; Musameh, M.M.; Kyratzis, I.L.; Wang, J. Wearable flexible and stretchable glove biosensor for on-site detection of organophosphorus chemical threats. ACS Sens. 2017, 2, 553–561. [Google Scholar] [CrossRef] [PubMed]
  73. Raad, M.W.; Deriche, M.A.; Hafeedh, A.B.; Almasawa, H.; Jofan, K.B.; Alsakkaf, H.; Bahumran, A.; Salem, M. An IOT based Wearable Smart Glove for Remote Monitoring of Rheumatoid Arthritis Patients. Biosignals 2019, 2019, 224–228. [Google Scholar]
  74. Kalavakonda, R.R.; Masna, N.V.R.; Mandal, S.; Bhunia, S. A smart mask for active defense against airborne pathogens. Sci. Rep. 2021, 11, 19910. [Google Scholar] [CrossRef]
  75. Cheng, K.K.; Lam, T.H.; Leung, C.C. Wearing face masks in the community during the COVID-19 pandemic: Altruism and solidarity. Lancet 2022, 399, e39–e40. [Google Scholar] [CrossRef]
  76. Hyysalo, J.; Dasanayake, S.; Hannu, J.; Schuss, C.; Rajanen, M.; Leppänen, T.; Doermann, D.; Sauvola, J. Smart mask–Wearable IoT solution for improved protection and personal health. Internet Things 2022, 18, 100511. [Google Scholar] [CrossRef]
  77. Ghatak, B.; Banerjee, S.; Ali, S.B.; Bandyopadhyay, R.; Das, N.; Mandal, D.; Tudu, B. Design of a Self-powered Smart Mask for COVID-19. arXiv 2020, arXiv:2005.08305. [Google Scholar]
  78. Yim, W.; Cheng, D.; Patel, S.H.; Kou, R.; Meng, Y.S.; Jokerst, J.V. KN95 and N95 respirators retain filtration efficiency despite a loss of dipole charge during decontamination. ACS Appl. Mater. Interfaces 2020, 12, 54473–54480. [Google Scholar] [CrossRef]
  79. Abdallah, M.; Hassan, R.; Jeremy, E. A novel smart stethoscope for health-care providers. In Proceedings of the 2017 IEEE MIT Undergraduate Research Technology Conference (URTC), Cambridge, MA, USA, 3–5 November 2017; pp. 1–4. [Google Scholar]
  80. Yilmaz, G.; Rapin, M.; Pessoa, D.; Rocha, B.M.; de Sousa, A.M.; Rusconi, R.; Carvalho, P.; Wacker, J.; Paiva, R.P.; Chételat, O. A wearable stethoscope for long-term ambulatory respiratory health monitoring. Sensors 2020, 20, 5124. [Google Scholar] [CrossRef]
  81. Klum, M.; Urban, M.; Tigges, T.; Pielmus, A.G.; Feldheiser, A.; Schmitt, T.; Orglmeister, R. Wearable cardiorespiratory monitoring employing a multimodal digital patch stethoscope: Estimation of ECG, PEP, LVET and respiration using a 55 mm single-lead ECG and phonocardiogram. Sensors 2020, 20, 2033. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  82. Zhang, P.; Wang, B.; Liu, Y.; Fan, M.; Ji, Y.; Xu, H.; Xu, M.; Chen, S.; Li, Q.; Zhang, Z. Lung auscultation of hospitalized patients with SARS-CoV-2 pneumonia via a wireless stethoscope. Int. J. Med. Sci. 2021, 18, 1415. [Google Scholar] [CrossRef] [PubMed]
  83. Lomas, N. NFC Ring Puts Wireless Transfer Tech On Your Finger So You Can Fist-Bump Phones. Join TechCrunch 2013, 1, 1. [Google Scholar]
  84. Shenoy, M. Sensor information processing for wearable iot devices. In Principles of Internet of Things (IoT) Ecosystem: Insight Paradigm; Springer: Berlin/Heidelberg, Germany, 2020; pp. 177–200. [Google Scholar]
  85. Iqbal, S.; Mahgoub, I.; Du, E.; Leavitt, M.A.; Asghar, W. Advances in healthcare wearable devices. NPJ Flex. Electron. 2021, 5, 9. [Google Scholar] [CrossRef]
  86. Chu, D.T.; Vu Ngoc, S.M.; Vu Thi, H.; Nguyen Thi, Y.V.; Ho, T.T.; Hoang, V.T.; Singh, V.; Al-Tawfiq, J.A. COVID-19 in Southeast Asia: Current status and perspectives. Bioengineered 2022, 13, 3797–3809. [Google Scholar] [CrossRef]
  87. Piuzzi, E.; Pisa, S.; Pittella, E.; Podestà, L.; Sangiovanni, S. Wearable Belt With Built-In Textile Electrodes for Cardio—Respiratory Monitoring. Sensors 2020, 20, 4500. [Google Scholar] [CrossRef]
  88. Sardini, E.; Serpelloni, M. Instrumented wearable belt for wireless health monitoring. Procedia Eng. 2010, 5, 580–583. [Google Scholar] [CrossRef] [Green Version]
  89. Wang, Q.; Su, M.; Zhang, M.; Li, R. Integrating digital technologies and public health to fight COVID-19 pandemic: Key technologies, applications, challenges and outlook of digital healthcare. Int. J. Environ. Res. Public Health 2021, 18, 6053. [Google Scholar] [CrossRef]
  90. Nakamura, Y.; Matsuda, Y.; Arakawa, Y.; Yasumoto, K. Waistonbelt x: A belt-type wearable device with sensing and intervention toward health behavior change. Sensors 2019, 19, 4600. [Google Scholar] [CrossRef]
  91. Kim, H.; Kim, S.; Lee, M.; Rhee, Y.; Lee, S.; Jeong, Y.R.; Kang, S.; Naqi, M.; Hong, S. Smart patch for skin temperature: Preliminary study to evaluate psychometrics and feasibility. Sensors 2021, 21, 1855. [Google Scholar] [CrossRef] [PubMed]
  92. Affordable Smart Patches Can Revolutionise Patient Monitoring. Available online: https://www.vttresearch.com/en/news-and-ideas/affordable-smart-patches-can-revolutionise-patient-monitoring (accessed on 16 March 2021).
  93. Shi, M.; Wu, H.; Zhang, J.; Han, M.; Meng, B.; Zhang, H. Self-powered wireless smart patch for healthcare monitoring. Nano Energy 2017, 32, 479–487. [Google Scholar] [CrossRef]
  94. Luo, N.; Dai, W.; Li, C.; Zhou, Z.; Lu, L.; Poon, C.C.; Chen, S.C.; Zhang, Y.; Zhao, N. Flexible piezoresistive sensor patch enabling ultralow power cuffless blood pressure measurement. Adv. Funct. Mater. 2016, 26, 1178–1187. [Google Scholar] [CrossRef]
  95. Mansouri, K.; Medeiros, F.A.; Tafreshi, A.; Weinreb, R.N. Continuous 24-hour monitoring of intraocular pressure patterns with a contact lens sensor: Safety, tolerability, and reproducibility in patients with glaucoma. Arch. Ophthalmol. 2012, 130, 1534–1539. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  96. Farandos, N.M.; Yetisen, A.K.; Monteiro, M.J.; Lowe, C.R.; Yun, S.H. Contact lens sensors in ocular diagnostics. Adv. Healthc. Mater. 2015, 4, 792–810. [Google Scholar] [CrossRef]
  97. Alexeev, V.L.; DAs, S.; Finegold, D.N.; AsHER, S.A. Photonic crystal glucose-sensing material for noninvasive monitoring of glucose in tear fluid. Clin. Chem. 2004, 50, 2353–2360. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  98. Keum, D.H.; Kim, S.K.; Koo, J.; Lee, G.H.; Jeon, C.; Mok, J.W.; Mun, B.H.; Lee, K.J.; Kamrani, E.; Joo, C.K.; et al. Wireless smart contact lens for diabetic diagnosis and therapy. Sci. Adv. 2020, 6, eaba3252. [Google Scholar] [CrossRef] [Green Version]
  99. Allam, F.; Nossai, Z.; Gomma, H.; Ibrahim, I.; Abdelsalam, M. Allam, F.; Nossai, Z.; Gomma, H.; Ibrahim, I.; Abdelsalam, M. A recurrent neural network approach for predicting glucose concentration in type-1 diabetic patients. In Engineering Applications of Neural Networks; Springer: Berlin/Heidelberg, Germany, 2011; pp. 254–259. [Google Scholar]
  100. Alam, M.G.R.; Abedin, S.F.; Moon, S.I.; Hong, C.S. CNN based mood mining through IoT-based physiological sensors observation. Korean Soc. Inf. Sci. Technol. Acad. Pap. 2017, 1301–1303. Available online: https://www.dbpia.co.kr/journal/articleDetail?nodeId=NODE07207559&language=ko_KR&hasTopBanner=true (accessed on 11 December 2022).
  101. Ahmad, E. Meezaj: An interactive system for real-time mood measurement and reflection based on internet of things. Int. J. Adv. Comput. Sci. Appl. 2020, 11, 629–636. [Google Scholar] [CrossRef]
  102. Pandey, P.S. Machine learning and IoT for prediction and detection of stress. In Proceedings of the 2017 17th International Conference on Computational Science and Its Applications (ICCSA), Trieste, Italy, 3–6 July 2017; pp. 1–5. [Google Scholar]
  103. Bisio, I.; Garibotto, C.; Lavagetto, F.; Sciarrone, A. When eHealth meets IoT: A smart wireless system for post-stroke home rehabilitation. IEEE Wirel. Commun. 2019, 26, 24–29. [Google Scholar] [CrossRef]
  104. Vedaei, S.S.; Fotovvat, A.; Mohebbian, M.R.; Rahman, G.M.; Wahid, K.A.; Babyn, P.; Marateb, H.R.; Mansourian, M.; Sami, R. COVID-SAFE: An IoT-based system for automated health monitoring and surveillance in post-pandemic life. IEEE Access 2020, 8, 188538. [Google Scholar] [CrossRef] [PubMed]
  105. Display, T.; Processor, D. Apple introduces Apple watch series 2, the ultimate device for a healthy life. Newsroom 2016, 1. Available online: https://www.apple.com/lt/newsroom/2016/09/07Apple-Introduces-Apple-Watch-Series-2-The-Ultimate-Device-For-A-Healthy-Life/ (accessed on 7 September 2016).
  106. Rodriguez, S. These smart glasses offer a glimpse at the future Apple and Facebook are planning. Title PRESS 2021, 1. Available online: https://www.cnbc.com/2021/11/20/these-smart-glasses-offer-a-glimpse-at-the-future-apple-and-facebook-are-planning.html (accessed on 20 November 2021).
  107. Peters, A. This Smart Jacket Helps Doctors Diagnose Pneumonia in Toddlers. FAST Company, 2017; Volume 1, pp. 1–2. Available online: https://www.fastcompany.com/3066978/this-smart-jacket-helps-doctors-diagnose-pneumonia-in-toddlers (accessed on 17 October 2002).
  108. Now, S. Introducing the new Oura ring generation 3. Oura 2021, 1, 1. [Google Scholar]
  109. Harrison, L. Triggerfish pressure sensor promising. Ophthalmol. News 2019, 1, 1. [Google Scholar]
  110. Cho, S.; Ensari, I.; Weng, C.; Kahn, M.G.; Natarajan, K. Factors affecting the quality of person-generated wearable device data and associated challenges: Rapid systematic review. JMIR mHealth uHealth 2021, 9, e20738. [Google Scholar] [CrossRef]
  111. Kumar, D.; Grover, H.S. Cryptanalysis of a secure and lightweight authentication protocol for wearable devices environment. In Proceedings of the 2018 2nd International Conference on Inventive Systems and Control (ICISC), Coimbatore, India, 19–20 January 2018; pp. 1063–1068. [Google Scholar]
  112. Mishra, S.S.; Rasool, A. IoT health care monitoring and tracking: A survey. In Proceedings of the 2019 3rd International Conference on Trends in Electronics and Informatics (ICOEI), Tirunelveli, India, 23–25 April 2019; pp. 1052–1057. [Google Scholar]
  113. Ransford, B.; Clark, S.S.; Kune, D.F.; Fu, K.; Burleson, W.P. Design challenges for secure implantable medical devices. In Proceedings of the DAC Design Automation Conference 2012, San Francisco, CA, USA, 3–7 June 2012; pp. 157–173. [Google Scholar]
  114. Fuller, D.; Colwell, E.; Low, J.; Orychock, K.; Tobin, M.A.; Simango, B.; Buote, R.; Van Heerden, D.; Luan, H.; Cullen, K.; et al. Reliability and validity of commercially available wearable devices for measuring steps, energy expenditure, and heart rate: Systematic review. JMIR mHealth uHealth 2020, 8, e18694. [Google Scholar] [CrossRef]
  115. Jiang, H.; Chen, X.; Zhang, S.; Zhang, X.; Kong, W.; Zhang, T. Software for wearable devices: Challenges and opportunities. In Proceedings of the 2015 IEEE 39th Annual Computer Software and Applications Conference, Taichung, Taiwan, 1–5 July 2015; Volume 3, pp. 592–597. [Google Scholar]
  116. Li, Z.; Wang, B.; Li, J.; Hua, Y.; Zhang, S. Local differential privacy protection for wearable device data. PLoS ONE 2022, 17, e0272766. [Google Scholar] [CrossRef]
Applsci 13 01394 g001 550
Figure 1. Applications of Internet of Medical Things (IoMT).
Figure 1. Applications of Internet of Medical Things (IoMT).
Applsci 13 01394 g001
Applsci 13 01394 g002 550
Figure 2. Categorization of wearable devices.
Figure 2. Categorization of wearable devices.
Applsci 13 01394 g002
Table
Table 1. IoT healthcare applications and precise use cases [24].
Table 1. IoT healthcare applications and precise use cases [24].
ApplicationsDetailsTechnologyReferences
Electrocardiogram
(Monitoring, Detection)		A wireless procurement IoT-related
ECG examining device		IoT framework
Anomaly detection		[23,25]
Glucose Level Sensing
(Monitoring)		Blood sugar level estimating noninvasive device
comprising a sugar level accumulator		IoT, IPv6[23,25,26]
Body Temperature
(Monitoring)		A thermometer along with an IoT channel are
used in this application		Thermometer, IoT System,
Sensors		[25,27,28]
Blood Pressure
(Monitoring)		To create an IoT-based BP monitor, BP KIT
meter and mobile device are interleaved		IoT frameworks, Pressure
Sensor		[25,29]
Oxygen Saturation
(Monitoring)		Real-time data transfer between patient and
practitioner is done by joining oximeter		Oximeter, IoT system[25,30,31]
Medicine Management
(Monitoring, Detection)		A medication managing system scrutinizes
machines validity using I2Pack and the iMedBox		RFID, IoT[25,32,33]
Rehabilitation System
(Monitoring, Detection)		A proposed IOT based system that continuously
gives details of the mental state of patients		IoT, Machine Learning[25,34,35]
Smart Devices
(Monitoring, Detection		Data is captured, processed,
and sent in real time		IoT, Big Data[25,36,37]
Wheelchair Management
(Monitoring, Detection)		Fully autonomous wheelchair app comprising
potential wheelchair design		IoT Frameworks,
Machine Learning		[25,38]
Vital Healthcare Services
(Monitoring)		Cardiovascular diseases, aptness,
and nervous		Machine Learning, Cloud
Computing, Big Data		[25,39,40,41]
Imminent Healthcare
(Monitoring, Prevention)		Mobilized IoT-based services, designs, and
applications help practitioners		IoT Net framework,
Intelligent Security Model		[40,42,43]
Table
Table 2. Comparison of wearable devices.
Table 2. Comparison of wearable devices.
Wearable DeviceMonitoring ParametersApplication PositionReferences
Smart Thermometer
(Monitoring) 		Fever Monitoring, COVID-19Armpit, Chest, Ear[48,95]
Smart Helmet
(Monitoring, Detection) 		Body temperature, imaging, location monitoring,
crowds monitoring, head safety 		Head[50,51]
Smart Watch
(Monitoring, Detection) 		Body temperature, fall detection, chronic disease,
pulse rate, viral diseases fitness 		Wrist[57,58,105]
Smart Glasses
(Monitoring, Prevention) 		Body temperature, crowd monitoring, Ebola,
COVID-19 location tracking 		Eyes, Head[60,106]
Smart Jacket
(Monitoring) 		Pneumonia, body temperature, lungs sounds,
oxygen saturation, safety of workers 		Chest, Arm[107]
Smart Socks
(Monitoring) 		Diabetic infection, injury, pulse rate,
Parkinson’s, oxygen saturation 		Feet[69,70]
Data Gloves
(Monitoring, Prevention) 		Rheumatoid arthritis, Parkinson’s, COVID-19Fingers, Hands[72]
Smart Mask
(Monitoring, Detection) 		Infections, pandemics, nursing flu, influenza,
COVID-19, respiratory virus 		Face, Nose[76,78,78]
Smart Stethoscope
(Monitoring, Detection) 		Heart beat sounds, stomach sounds
pneumonia, breathing, influenza, flu 		Chest, Ears, Neck[80]
Smart Ring
(Monitoring, Detection) 		Pulse rate, body temperature, respiration rate,
movements and gesture, oxygen level 		Finger[108]
Smart Belt
(Monitoring, Detection) 		Monitor movements, ECG, body temperature,
respiratory rate, heartbeat, breathing rate 		Waist, Chest[87,88]
Smart Patches
(Monitoring, Detection) 		COVID-19, pulse rate, respiration rate,
oxygen level, body temperature		Skin[92]
Smart Lens
(Monitoring)		Vision enhancement, allergies, glaucomaEyes[109]
Smart Nutrition System
(Monitoring, Detection)		Detect glucose concentration position sensorNeck[11,99]
Smart Mood Monitoring
System (Monitoring)		Monitor mood, pulse rateWrist[100,101,102]
Smart Rehabilitation System
(Monitoring, Detection)		Exercise monitoring systemSkin[103]
Smart COVID-19 Detection
System (Detection)		Cough monitoring, GPS monitoringNeck[18,19,47,104]
Table
Table 3. Potential risk associated with wearable technology.
Table 3. Potential risk associated with wearable technology.
Wearable DevicePossible Risks
BurningSometimes during usage these wearables cause burns on human body
parts such as on skin due to the high temperature of batteries.
Electric shockWearables have direct contact with the user’s body or are sometimes planted
in the clothes; in such cases, a minor electric shock brings a great risk.
Fire, ExplosionBattery explosion causes fire and high temperature that damage the skin.
Skin damageSome wearables cause cuts, scratches, and wounds on human body parts,
such as wearable masks that caused skin damage during COVID-19.
ReactionsSometimes wearable cause chemical reactions, such as when chemicals
in the fibers or metals that have contact with skin cause rashes.
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Share and Cite

MDPI and ACS Style

Subhan, F.; Mirza, A.; Su’ud, M.B.M.; Alam, M.M.; Nisar, S.; Habib, U.; Iqbal, M.Z. AI-Enabled Wearable Medical Internet of Things in Healthcare System: A Survey. Appl. Sci. 2023, 13, 1394. https://doi.org/10.3390/app13031394

AMA Style

Subhan F, Mirza A, Su’ud MBM, Alam MM, Nisar S, Habib U, Iqbal MZ. AI-Enabled Wearable Medical Internet of Things in Healthcare System: A Survey. Applied Sciences. 2023; 13(3):1394. https://doi.org/10.3390/app13031394

Chicago/Turabian Style

Subhan, Fazli, Alina Mirza, Mazliham Bin Mohd Su’ud, Muhammad Mansoor Alam, Shibli Nisar, Usman Habib, and Muhammad Zubair Iqbal. 2023. "AI-Enabled Wearable Medical Internet of Things in Healthcare System: A Survey" Applied Sciences 13, no. 3: 1394. https://doi.org/10.3390/app13031394

APA Style

Subhan, F., Mirza, A., Su’ud, M. B. M., Alam, M. M., Nisar, S., Habib, U., & Iqbal, M. Z. (2023). AI-Enabled Wearable Medical Internet of Things in Healthcare System: A Survey. Applied Sciences, 13(3), 1394. https://doi.org/10.3390/app13031394

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop