Application of Simulation Technology in Vocational Education Skills Competition
Authors: 
Shang Wang, Fei Peng, Xuelei WangAuthors Info & Claims
Pages 100 - 105
Abstract
Skills competition is an important part of vocational education system and it has received more and more attention from scholars. In order to ensure the reliability and stability of the competition work, it is necessary to test the mechanical properties. However, vocational colleges lack of relevant experimental equipment, which has become an important factor restricting the preparation for competitions. In order to solve the problem that the students can not test the mechanical properties of their work, this paper proposes a solution based on simulation technology. According to the test requirements of the students, the finite element model was built and the simulation calculation was carried out on a server. The results show that the reduction is 2.731 mm, which meets the mechanical property requirements of the work. The maximum Mises stress is 61.37 MPa, which is less than the allowable stress. The simulation technology not only solves the students’ testing needs, but also provides data support for the specifications of their work. In addition, the application of simulation technology speeds up the production process of the work and saves the experimental cost. E-education is one of the important trends in the future development of vocational education. Simulation technology can provide rich visual resources and rich data for E-education, which is worth exploring by more researchers.
References
[1]
Xia M Y, Li J, Xiao H. 2022. Dilemma,attribution and solution of high-quality development of vocational education in China. J. Higher Vocational Education Exploration, 21(3): 41-48. https://doi.org/10.3969/j.issn.2095-364X.2022.03.009
[2]
Lou L. 2022. Research on the cultivating model of skilled and innovative talents in higher vocational education. J. Journal of Baotou Vocational & Technical College, 23(2): 66-68. https://doi.org/10.3969/j.issn.1672-0903.2022.02.018
[3]
Li G, Geng Y, Pang H. 2016. A discussion about the impact of vocational skills competition on the teaching reform in vocational colleges. In Proceedings of the 2nd International Conference on Arts, Design and Contemporary Education. Atlantis Press, 1090-1093. https://doi.org/10.2991/icadce-16.2016.268
[4]
Wang S, Feng Z. 2022. Promotion of skills competition on construction of teaching staff in higher vocational colleges. In Proceedings of the 7th International Conference on Social Sciences and Economic Development (ICSSED 2022). Atlantis Press, 1252-1257. https://doi.org/10.2991/aebmr.k.220405.207
[5]
Meng K, Hao Z J. 2022.The new Vocational Education Law: significance, characteristics and breakthrough. J. Vocational and Technical Education, 43(15): 20-24. http://doi.org/10.3969/j.issn.1008-3219.2022.15.005
[6]
Liu X N. 2022. On the characteristics of “Good Law” in the New Vocational Education Law from the perspective of policy analysis. J. Vocational and Technical Education, 43(22): 6-10. http://doi.org/10.3969/j.issn.1008-3219.2022.22.002
[7]
Wan J, Chen B B, Si H Y. 2017. Mining and measurement of vocational skills and their association rules based on big data. In Proceedings of the International Conference on Digital Technology in Education. 2017: 59-63. https://doi.org/10.1145/3134847.3134858
[8]
Green A. 1998. Core skills, key skills and general culture: in search of the common foundation in vocational education. J. Evaluation & Research in Education, 12(1): 23-43. https://doi.org/10.1080/09500799808666929
[9]
Zheng M Y. 2022. Research on the cultivation of applied top talents of sports economic management specialty based on vocational skills competition. J. Jiangsu Business Theory, 2022(08): 117-120. https://doi.org/10.13395/j.cnki.issn.1009-0061.2022.08.008
[10]
Lv W S, Li J X. 2019. Research on the application of innovation practice in the digital design of industrial products in the higher vocational skills competition. J. Journal of Qingdao Ocean Shipping Mariners College, 40(3): 51-56, 74. https://doi.org/10.3969/j.issn.2095-3747.2019.03.012
[11]
Wang S, Wang X L, Feng Z X, 2022. Thoughts on construction of practical training base in vocational colleges. In Proceedings of the 2021 International Conference on Education, Language and Art (ICELA 2021). Atlantis Press, 2022: 367-371. https://doi.org/10.2991/assehr.k.220131.067
[12]
Teng W Y. 2015. Skills competition improves students’ professional skills and practical ability. J. Education Circle, 2015(33): 151-151. https://doi.org/10.3969/j.issn.1674-9510.2015.33.128
[13]
Du C Z. Wang Q. 2019. The role of vocational skills competition in the development and construction of the internet of things. J. Occupation, 2019(6): 22-23. https://doi.org/10.3969/j.issn.1009-9573.2019.06.008
[14]
Ding Q J. 2018. Analysis on the practice of vocational skills competition promoting the reform and development of vocational colleges. J. Charming China, 2018(45): 149-150. https://doi.org/10.3969/j.issn.1673-0992.2018.45.270
[15]
Leraas H J, Cox M L, Bendersky V A, 2018. Instituting a surgical skills competition increases technical performance of surgical clerkship students over time. J. Journal of Surgical Education, 75(3): 644-649. https://doi.org/10.1016/j.jsurg.2017.09.007
[16]
Abdelmageed M G, El-Bab A M R F, Abouelsoud A. 2019. Design and simulation of pulsatile blood flow energy harvester for powering medical devices. J. Microelectronics Journal, 86: 105-113. https://doi.org/10.1016/j.mejo.2019.02.021
[17]
Vosooghi R, Puchinger J, Jankovic M, 2019. Shared autonomous vehicle simulation and service design. J. Transportation Research Part C: Emerging Technologies, 107: 15-33. https://doi.org/10.1016/j.trc.2019.08.006
Index Terms
- Application of Simulation Technology in Vocational Education Skills Competition
Recommendations
The Application of Simulation in the Design of Skills Competition Entry in Vocational Colleges
ICETC '22: Proceedings of the 14th International Conference on Education Technology and ComputersSkills competition is an important part of vocational education system and an important way for students to exercise their practical ability. However, vocational colleges are lack of relevant experimental equipment, which affects the design and ...
Finite Element Modeling and Simulation of Torsion Experiment and Teaching Practice in Vocational Colleges
IC4E '23: Proceedings of the 2023 14th International Conference on E-Education, E-Business, E-Management and E-LearningThe problem of ineffective experimental teaching of Engineering Mechanics in vocational colleges has always existed. In order to solve this problem, the research team proposed the idea of using simulation technology to improve the teaching quality. The ...
Practical Path of Application of Artificial Intelligence Technology in Vocational Education
AICCC '22: Proceedings of the 2022 5th Artificial Intelligence and Cloud Computing ConferenceIn the era of artificial intelligence, vocational education must accelerate its own reform to dynamically adapt to the needs of changing skills. In the face of the era of artificial intelligence, vocational education should first adjust the training ...
Comments
Please enable JavaScript to view thecomments powered by Disqus.Information & Contributors
Information
Published In
February 2023
305 pages
ISBN:9798400700651
DOI:10.1145/3588243
Copyright © 2023 ACM.
Permission to make digital or hard copies of all or part of this work for personal or classroom use is granted without fee provided that copies are not made or distributed for profit or commercial advantage and that copies bear this notice and the full citation on the first page. Copyrights for components of this work owned by others than the author(s) must be honored. Abstracting with credit is permitted. To copy otherwise, or republish, to post on servers or to redistribute to lists, requires prior specific permission and/or a fee. Request permissions from [email protected].
Publisher
Association for Computing Machinery
New York, NY, United States
Publication History
Published: 17 May 2023
Check for updates
Author Tags
Qualifiers
- Research-article
- Research
- Refereed limited
Funding Sources
- Project of China Vocational Education Association
- Project of Innovation and Development Center of Ideological and Political Work (Beijing Polytechnic), Ministry of Education
Conference
IC4E 2023
IC4E 2023: 2023 the 14th International Conference on E-Education, E-Business, E-Management and E-Learning
February 1 - 4, 2023
Shenzhen, China
Contributors
Other Metrics
Bibliometrics & Citations
Bibliometrics
Article Metrics
- 0Total Citations
- 14Total Downloads
- Downloads (Last 12 months)8
- Downloads (Last 6 weeks)2
Reflects downloads up to 25 Nov 2024
Other Metrics
Citations
Cited By
View allView Options
Login options
Check if you have access through your login credentials or your institution to get full access on this article.
Sign inFull Access
View options
View or Download as a PDF file.
PDFeReader
View online with eReader.
eReaderHTML Format
View this article in HTML Format.
HTML Format