Design of Safety Analog Voltage Acquisition Module
Authors: 
Junyuan Shen, Huan Ding, Xiguo Ren, Shumin Ge, Yimin Wang, Tengfei WangAuthors Info & Claims
Article No.: 42, Pages 1 - 5
Abstract
Based on the demand of trackside control unit about analog voltage safety acquisition, a safety analog voltage acquisition module is designed in this paper. it is implemented by using the method of heterogeneous hardware design and two out of two software design. The module realizes the safety acquisition of single ended and differential voltage signals within the specified frequency range for the first time. It has the characteristics of miniaturization and lightweight. It is suitable for application scenarios with safety acquisition requirements in the field of rail transit.
References
[1]
SANG Shang-ming, YIN Cong-ru, WEN Xing-xi, ZHANG Xian, LUO Zhen, PENG Shuai (2020). Design and Verification of Multi-channel Isolated Voltage Acquisition Board [J]. Journal of Astronautic Metrology and Measurement, 40 (1): 73-78.
[2]
Chen Hongyuan, Guo Tiantai, Wu Junjie, Ye Ting, Lin Xiqian (2014). Development of a synchronous acquisition system for multi-channel weak voltage signals [J]. Application of Electronic Technique, 40(2): 78-84.
[3]
Sun Junqi, Lv Shaofeng, Tian Yunfang (2018). The design of high precision voltage current acquisition management unit [J]. Qutlook of Electronic Technology, 1:72-75,71.
[4]
Yu Zhongan, Zou Hao, He Junjie (2018). Design of high precision battery voltage acquisition system [J]. Chinese Journal of Power Sources, 42 (7): 977-980.
[5]
Cheng Yaolin (2012). A Design Method of High Speed Data Acquisition Circuit Based on ADS5232 [J]. Journal of South-Central University for Nationalities,31(4): 97-100.
[6]
Wang Bin, Qi Changyuan, Li Yongping (2002). The High precis3ion Data Acquisition of Voltage and Current [J]. ELECTRONIC MEASUREMENT TECHNOLOGY, 1: 20-22.
[7]
XU Xiao-xia (2019). Design of voltage acquisition system based on STM32 [J]. Electronic Design Engineering, 27 (17): 76-79.
[8]
WU Can, ZHANG Yong-zhong (2019). Design of voltage collection for aluminum air batteries [J]. Chinese Journal of Power Sources, 43(5): 836-837,841.
[9]
Wang Lin, Ping Qifa (2020). Development and Verification of Intrinsic Safety Intelligent PID Temperature Controller [J]. Process Automation Instrumentation, 41(8):24-29.
[10]
Le Jianrui (2020). Design of Metro LCU Based on 2×2-out-of-2 Redundancy-Safety Control Structure [J]. Railway Signalling & Communication Engineering, 17(5):52-56.
[11]
Liu Guopeng (2021). Judgment and Analysis of Small Rail Voltage Fluctuation of ZPW-2000A Track Circuit [J]. Railway Signalling & Communication Engineering, 18(1): 95-100,108.
Recommendations
An Ultra-Low-Voltage Bulk-Driven Analog Voltage Buffer with Rail-to-Rail Input/Output Range
This paper presents a low-voltage high driving capability rail-to-rail Class-AB CMOS bulk-driven (BD) operational transconductance amplifier (OTA) for analog voltage buffer with minimal current consumption. The proposed OTA design consists of adaptively ...
Analysis and design of voltage-controlled oscillator based analog-to-digital converter
A voltage-controlled oscillator (VCO) based analog-to-digital converter (ADC) is a time-based architecture with a first-order noise-shaping property, which can be implemented using a VCO and digital circuits. This paper analyzes the performance of VCO-...
Active Current Mirrors for Low-Voltage Analog Circuit Design
In this work, active current mirrors using sensing resistors and a pass transistor in a feedback loop will be examined in detail. First, several non-idealities in this family of circuits, such as offset, noise, output impedance, or bandwidth, are ...
Comments
Please enable JavaScript to view thecomments powered by Disqus.Information & Contributors
Information
Published In
October 2021
660 pages
Copyright © 2021 ACM.
Permission to make digital or hard copies of all or part of this work for personal or classroom use is granted without fee provided that copies are not made or distributed for profit or commercial advantage and that copies bear this notice and the full citation on the first page. Copyrights for components of this work owned by others than ACM must be honored. Abstracting with credit is permitted. To copy otherwise, or republish, to post on servers or to redistribute to lists, requires prior specific permission and/or a fee. Request permissions from [email protected]
Publisher
Association for Computing Machinery
New York, NY, United States
Publication History
Published: 07 December 2021
Check for updates
Author Tags
Qualifiers
- Research-article
- Research
- Refereed limited
Conference
CSAE 2021
CSAE 2021: The 5th International Conference on Computer Science and Application Engineering
October 19 - 21, 2021
Sanya, China
Acceptance Rates
Overall Acceptance Rate 368 of 770 submissions, 48%
Contributors
Other Metrics
Bibliometrics & Citations
Bibliometrics
Article Metrics
- 0Total Citations
- 25Total Downloads
- Downloads (Last 12 months)6
- Downloads (Last 6 weeks)0
Reflects downloads up to 30 Nov 2024
Other Metrics
Citations
View Options
Login options
Check if you have access through your login credentials or your institution to get full access on this article.
Sign inFull Access
View options
View or Download as a PDF file.
PDFeReader
View online with eReader.
eReaderHTML Format
View this article in HTML Format.
HTML Format