default search action
International Journal of Automation Technology, Volume 8
Volume 8, Number 1, January 2014
- Yasuhiro Takaya, Tomohiko Maeda:
Editorial: Measurement Technology for Process and Product Quality Control. 3 - Yasuhiro Takaya:
In-Process and On-Machine Measurement of Machining Accuracy for Process and Product Quality Management: A Review. 4-19 - Soichi Ibaraki, Yusuke Ota:
Error Calibration for Five-Axis Machine Tools by On-the-Machine Measurement Using a Touch-Trigger Probe. 20-27 - So Ito, Sho Sekine, Yuki Shimizu
, Wei Gao
Measurement of Cutting Edge Width of a Rotary Cutting Tool by Using a Laser Displacement Sensor. 28-33 - Tomohiro Hirose, Yoshihiro Kami, Tatsuhito Shimizu, Makoto Yabuya, Yoshitaka Morimoto:
Development of On-Machine Measurement Unit for Correction Processing of Aspheric Lens Mold with High Numerical Aperture. 34-42 - Eiki Okuyama, Hiromi Ishikawa:
Generalized Two-Point Method Using Inverse Filtering for Surface Profile Measurement - Theoretical Analysis and Experimental Results for Error Propagation -. 43-48 - Marcel Henerichs, Michael Egeter, Thomas Liebrich, Robert Voß, Konrad Wegener:
Evaluation of the IWF-Wunder Reproduction Method for Generating Positive Replica. 49-56 - Tao Zhang, Zhoumo Zeng, Yibo Li, Wei-Kui Wang, Xu Bian:
Characteristics Analysis of Vacuum Gas Leak Detection Signals Based on Acoustic Emission. 57-61 - Yasuo Iwaki:
Quality Control in the Third Generation of ISO - New Quality Engineering for Biochemical Analysis -. 62-71
- Naohiko Sugita, Mamoru Mitsuishi:
Editorial: Biomanufacturing. 73 - Truong Duc Phuc, Masahiko Yoshino, Akinori Yamanaka
Effects of Morphology of Nanodots on Localized Surface Plasmon Resonance Property. 74-82 - Yoshinori Fujihira, Takuya Hanyu, Yusuke Kanada, Takeshi Yoneyama, Tetsuyou Watanabe, Hiroyuki Kagawa:
Gripping Force Feedback System for Neurosurgery. 83-94 - Shotaro Yoshida, Koji Sato, Shoji Takeuchi:
Three-Dimensional Microassembly of Cell-Laden Microplates by in situ Gluing with Photocurable Hydrogels. 95-101 - Masayoshi Mizutani, Ryo Honda, Yuta Kurashina
Improved Cytocompatibility of Nanosecond-Pulsed Laser-Treated Commercially Pure Ti Surfaces. 102-109 - Norihiro Koizumi, Kouhei Oota, Dongjun Lee, Hiroyuki Tsukihara, Akira Nomiya, Kiyoshi Yoshinaka, Takashi Azuma, Naohiko Sugita, Yukio Homma, Yoichiro Matsumoto, Mamoru Mitsuishi:
System Identification Method for Non-Invasive Ultrasound Theragnostic System Incorporating Mechanical Oscillation Part. 110-119
- Koji Koyama, Hideo Aida, Michio Uneda
Effects of N-Face Finishing on Geometry of Double-Side Polished GaN Substrate. 121-127
Volume 8, Number 2, March 2014
- Toshiro Noritsugu:
Editorial: Robotics for Innovative Industry and Society. 139 - Hiroki Matsuoka, Koichi Suzumori
Gas/Liquid Phase Change Actuator for Use in Extreme Temperature Environments. 140-146 - Takashi Nozaki, Toshiro Noritsugu:
Motion Analysis of McKibben Type Pneumatic Rubber Artificial Muscle with Finite Element Method. 147-158 - Eiji Murayama, Yoshiyuki Yogosawa, Yukio Kawakami, Akiyoshi Horikawa, Koji Shioda, Masashi Ogawa:
Study on Control Performance with Consideration of Articulated Manipulators with Pneumatic Cylinders. 159-168 - Takahiro Kosaki, Yoshihiro Morinaga, Manabu Sano:
Prototype Development of a Parallel-Link Robot Actuated by Pneumatic Linear Drives with Variable Inclination Mechanisms. 169-176 - Daisuke Sasaki, Toshiro Noritsugu, Masahiro Takaiwa, Hidekazu Konishi:
Control Method Based on EMG for Power Assist Glove Using Self-Organizing Maps. 177-185 - Kanya Tanaka, Shenglin Mu, Shota Nakashima:
Meal-Assistance Robot Using Ultrasonic Motor with Eye Interface. 186-192 - Hiroyuki Inoue, Toshiro Noritsugu:
Development of Upper-Limb Power-Assist Machine Using Linkage Mechanism - Mechanism and its Fundamental Motion -. 193-200 - Hirohito Tanaka, Minoru Hashimoto:
Development of a Non-Exoskeletal Structure for a Robotic Suit. 201-207 - Masahiro Takaiwa, Toshiro Noritsugu, Daisuke Sasaki, Takahiro Nogami:
Fingertip Force Displaying Device Using Pneumatic Negative Pressure. 208-215 - Jianhai Han, Xiangpan Li, Qi Qin:
Design of Two-Wheeled Self-Balancing Robot Based on Sensor Fusion Algorithm. 216-221 - Mohamed Najib Ribuan
New Pneumatic Rubber Leg Mechanism for Omnidirectional Locomotion. 222-230 - Masaaki Ikeda, Shigeki Hikasa, Keigo Watanabe, Isaku Nagai:
Motion Analysis of a Manta Robot for Underwater Exploration by Propulsive Experiments and the Design of Central Pattern Generator. 231-237 - Mitsuji Monta, Kazuhiko Namba:
Mobile Quality Evaluation Robot for Making Agricultural Products Traceable. 238-242 - Masato Okada
Burnishing Process Using Spherical 5-DOF Hybrid-Type Parallel Mechanism with Force Control. 243-252 - Koji Shibuya
Evaluation of Metallic Mold Surfaces Polished by an Industrial Robot with Stick Whetstones. 253-263
- Wisnu Aribowo, Kazuhiko Terashima:
Cubic Spline Trajectory Planning and Vibration Suppression of Semiconductor Wafer Transfer Robot Arm. 265-274 - Kenichi Iwatsuka, Yukio Maeda, Takanori Yazawa, Shinya Suzuki:
Effect of Tool Run-Out on Micro-Groove Milling for a Microchannel Die. 275-281 - Urs Leberle, Jürgen Fleischer
Automated Modular and Part-Flexible Feeding System for Micro Parts. 282-290
Volume 8, Number 3, May 2014
- Satoshi Kanai, Keiichi Shirase:
Editorial: CAD, CAM, and Digital Engineering. 303 - Kenjiro T. Miura, Rudrusamy U. Gobithaasan:
Aesthetic Curves and Surfaces in Computer Aided Geometric Design. 304-316 - Mohammad Mi'radj Isnaini, Keiichi Shirase:
Review of Computer-Aided Process Planning Systems for Machining Operation - Future Development of a Computer-Aided Process Planning System -. 317-332 - Takeo Kato, Masatoshi Muramatsu, Suguru Kimura, Yoshiyuki Matsuoka:
Robust Design Method Using Adjustable Control Factors. 333-343 - Yutaka Nomaguchi, Masashi Mizuta, Masaya Hirooka, Kikuo Fujita:
Study on Knowledge-Based Product Design Framework for Facilitating the Interaction of Model Based Development and Prototyping. 344-355 - Hiroshi Kawaharada, Yusuke Imai, Hiroyuki Hiraoka:
Quadrilateral Meshing for Hexahedral Mesh Generation Based on Facet Normal Matching. 356-364 - Wonho Lee, Jin-Hoon Kim, Changbae Park:
Topology Optimization for Polymeric Foam Shock-Absorbing Structure Using Hybrid Cellular Automata. 365-375 - Yui Endo, Mitsunori Tada, Masaaki Mochimaru:
Hand Modeling and Motion Reconstruction for Individuals. 376-387 - Fumiki Tanaka, Hiroyuki Abe, Shinji Igari, Masahiko Onosato:
Integrated Information Model for Design, Machining, and Measuring Using Annotated Features. 388-395 - Eiji Morinaga, Takuma Hara, Hiroki Joko, Hidefumi Wakamatsu, Eiji Arai:
Improvement of Computational Efficiency in Flexible Computer-Aided Process Planning. 396-405 - Satoshi Kanai, Takayuki Shibata
Feature-Based 3D Process Planning for MEMS Fabrication. 406-419 - Jun'ichi Kaneko, Yuki Yamauchi, Kenichiro Horio:
Fast Estimation Method of Machinable Area of Workpiece Surface for 3+2-Axis Control Machining Using Graphics Device - Visualization Algorithm of Machinable Area and Minimum Shank Length with Texture Projection Technique -. 420-427 - Keigo Takasugi, Naoki Asakawa, Yoshitaka Morimoto:
A Surface Parameter-Based Method for Accurate and Efficient Tool Path Generation. 428-436 - Hirotaka Kameyama, Ikuru Otomo, Masahiko Onosato, Fumiki Tanaka:
Using a Four-Dimensional Mesh Model to Represent a Tool Motion Trajectory in Five-Axis Machining. 437-444 - Raiyo Oka, Koichi Morishige:
Development of Turning Machine Operation Interface that Uses Haptic Device. 445-451 - Ryoya Kamata, Ryosuke Tamura, Satoshi Niitsu, Hiroshi Kawaharada, Hiroyuki Hiraoka:
Use of 1DOF Haptic Device for Remote-Controlled 6DOF Assembly. 452-459
- Jui-Fang Liang, Y. S. Liao:
Methods to Measure Wire Deflection in Wire EDM Machining. 461-467 - Mu-Tian Yan, Pai-Hung Hsieh:
Monitoring and Adaptive Process Control of Wire Electrical Discharge Turning. 468-477 - Jun Ishimatsu, Atsushi Iwaita, Hiromi Isobe:
Grinding a Hard-to-Grind Materials with Ultrasonic-Assisted Fluid. 478-483 - Rui-Yin Tang, Zhoumo Zeng, Changku Sun, Peng Wang:
3-Step-Calibration of 3D Vision Measurement System Based-on Structured Light. 484-489 - Yuki Ueno, Hideo Kitagawa, Kiyoaki Kakihara, Toshio Sakakibara, Kazuhiko Terashima:
Development of an Innovative Power-Assist Omni-Directional Mobile Bed Considering Operator's Characteristics. 490-499
Volume 8, Number 4, July 2014
- Michael Gebhardt, Alexander Schneeberger, Sascha Weikert, Wolfgang Knapp, Konrad Wegener:
Thermally Caused Location Errors of Rotary Axes of 5-Axis Machine Tools. 511-522 - Hisamichi Yoshigoe, Shotaro Kadoya, Satoru Takahashi
Fabrication and Composition Control of Three-Dimensional Dielectric Metal Microstructure Using Photocatalyst Nanoparticles. 523-529 - Yohichi Nakao, Kenji Suzuki, Kohei Yamada, Kohei Nagasaka:
Feasibility Study on Design of Spindle Supported by High-Stiffness Water Hydrostatic Thrust Bearing. 530-538 - Hironori Hibino:
Method to Control Manufacturing Cell by Driving Simulation Model. 539-549 - Naoki Takahashi, Jun Shinozuka:
Contributions of High-Speed Cutting and High Rake Angle to the Cutting Performance of Natural Rubber. 550-560 - Vitchuda Lertphokanont, Masahiro Oi, Takayuki Sato, Minoru Ota, Kai Egashira, Keishi Yamaguchi, Masayoshi Yamada, Yasuo Tomita:
Effect of Discharge Duration and Pulse Frequency on Surface Characteristics Using Whirling Electrical Discharge Texturing. 561-568 - Masakazu Fujimoto, Yongbo Wu, Mitsuyoshi Nomura, Hidenari Kanai, Masahiko Jin:
Surface Topography of Mini-Size Diamond Wheel in Ultrasonic Assisted Grinding (UAG). 569-575 - Keita Shimada
Statistical Analysis for Evaluating Surface Roughness of Plane Honing. 576-583 - Xi Zhang, Laiwei Li, Junyi Yang:
Study on Underwater Dual-Laser Structured-Light System for ROV Guiding. 584-591 - Ryunosuke Sato:
Basic Properties of Fixed Abrasive Polishing by Alumina Abrasive Grain for Si Wafer - Effects of Actual Contact Area and Grain Size -. 592-597 - Ahmed O. Abdul Salam:
A Generalized Architecture for Academic and Industrial Automation and Control via Internet. 598-610
Volume 8, Number 5, September 2014
- Yasushi Umeda:
Editorial: Design and Manufacturing for Environmental Sustainability. 625 - Michinori Uwasu, Keishiro Hara, Hideki Kobayashi
Analysis of Energy Consumption Patterns and Climate Effects Using Panel Data. 626-633 - Yuji Mizuno, Yusuke Kishita, Shinichi Fukushige, Yasushi Umeda:
Envisioning Sustainable Manufacturing Industries of Japan. 634-643 - Jelena Kurilova-Palisaitiene, Erik Sundin:
Challenges and Opportunities of Lean Remanufacturing. 644-652 - Hitoshi Komoto, Shinsuke Kondoh, Keijiro Masui:
Simulating the Formation of Urban Mines Considering the Rational Decisions of Distributed End-of-Life Stakeholders. 653-663 - Katherine Whalen, David Peck:
In the Loop - Sustainable, Circular Product Design and Critical Materials. 664-676 - Nariaki Nishino
A Study on How Investors Decide on Socially Responsible Investments: Classification of Investment Behavior According to Companies' Environmental Activities. 677-687 - Keiko Aoki, Kenju Akai
An Actual Purchasing Experiment for Investigating the Effects of Eco-Information on Consumers' Environmental Consciousness and Attitudes Towards Agricultural Products. 688-697 - Takuya Taguchi, Kei Matsumoto, Keita Imamura, Koichiro Goto, Kazuya Oizumi, Kenji Tanaka
Route Search and Evaluation Method Including Charging Plan for Electric Vehicles. 698-704 - Shinsuke Kondoh, Hitoshi Komoto
Toward a Pattern Language for Eco-Business Design. 706-715 - Shana Shiang-Fong Smith, Weizhe Wang:
Green Modular Design by the Concept of Chemical Activation Energy. 716-722 - Tetsushi Mimuro, Hiroyuki Takanashi:
Fuel Operated Heaters Applied to Electric Vehicles. 723-732 - Pha N. Pham, Kazuhisa Ito, Shigeru Ikeo:
Energy Efficiency Improvement of Water Hydraulic Fluid Switching Transmission. 733-744 - A. M. M. Sharif Ullah
Analyzing the Sustainability of Bimetallic Components. 745-753
- Manabu Nishio, Nobuyuki Moronuki, Minoru Abasaki:
Fabrication of Patterned Ag and Au Inverse Opal Structures Through Repeated Self-Assembly of Fine Particles. 755-760 - Pusit Mitsomwang, Shigeru Nagasawa, Hiroki Kuroiwa, Yoshio Fukushima:
Deformation Analysis of Silicone Rubber Sheet Subjected to Keen WC Blade Indentation. 761-772 - Tohru Ishida, Yuichi Okahara, Masahiko Kita, Akira Mizobuchi, Keiichi Nakamoto, Yoshimi Takeuchi:
Fundamental Study on Hole Fabrication Inside a Hole by Means of Electrical Discharge Machining. 773-782
Volume 8, Number 6, November 2014
- Tojiro Aoyama:
Editorial: Machining Control and Process Monitoring. 791 - Tomokazu Kobayashi, Toshihiko Hirooka, Atsushi Hakotani, Ryuta Sato, Keiichi Shirase:
Tool Motion Control Referring to Voxel Information of Removal Volume Voxel Model to Achieve Autonomous Milling Operation. 792-800 - Ryuta Sato, Yuki Sato, Keiichi Shirase, Gianni Campatelli, Antonio Scippa:
Finished Surface Simulation Method to Predicting the Effects of Machine Tool Motion Errors. 801-810 - Atsushi Matsubara, Atsuko Sayama, Taku Sakai, Matthias Reuss:
Analysis of Measured Friction of Rolling Balls in Raceway Grooves. 811-819 - Yilong Wang, Eiji Shamoto:
Elliptical Vibration Cutting of Hardened Steel with Large Nose Radius Single Crystal Diamond Tool. 820-826 - Ryo Koike, Ryo Kumakura, Takashi Arai, Eishiro Uchishiba, Makoto Murakami, Takahisa Sagara, Yasuhiro Kakinuma:
Sensorless Tool Stiffness Monitoring in Buffing. 827-836 - Norikazu Suzuki
Tool Failure Mechanism in High-Speed Milling of Inconel 718 by Use of Ceramic Tools. 837-846
- Akira Chiba, Hirofumi Hidai, Souta Matsusaka, Noboru Morita:
Dynamic Thermoelastic Behavior in Sheet Glass Generated by Pulsed Laser Irradiation Using a One-Dimensional Model. 847-854 - Jingsi Wang
Using Smoothed Particle Hydrodynamics to Examine Influence of Process Parameters on Ultrasonic Machining. 855-863 - Truong Quoc Thanh, Dinh Quang Truong
Development of a Novel Linear Magnetic Actuator. 864-873 - Hideharu Kato, Shingo Nakata, Noriaki Ikenaga, Hiroaki Sugita:
Improvement of Chip Evacuation in Drilling of Lead-Free Brass Using Micro Drill. 874-879 - Fumiaki Osawa, Kazunori Kanou, Yasushi Yamada:
Research on the Form Recognition of Fabric Products: Acquiring the Shapes of Flat, Limp Materials. 880-887 - Dang Xuan Ba, Kyoung Kwan Ahn, Nguyen Trong Tai:
Adaptive Integral-Type Neural Sliding Mode Control for Pneumatic Muscle Actuator. 888-895 - Teppei Onuki, Ippei Murayama, Hirotaka Ojima, Jun Shimizu, Libo Zhou:
Modeling of Process Mechanisms in Pulsed Laser Micro Machining on Lithium Niobate Substrates. 896-902 - German Herrera-Granados
Development of a Non-RigidMicro-Scale Cutting Mechanism Measuring the Cutting Force Using an Optical Lever. 903-911
manage site settings
To protect your privacy, all features that rely on external API calls from your browser are turned off by default. You need to opt-in for them to become active. All settings here will be stored as cookies with your web browser. For more information see our F.A.Q.
last updated on 2024-11-22 19:45 CET by the dblp team
all metadata released as open data under CC0 1.0 license
see also: Terms of Use | Privacy Policy | Imprint
dblp was originally created in 1993 at:
since 2018, dblp has been operated and maintained by:
the dblp computer science bibliography is funded and supported by: