default search action
14th SMACD 2017: Giardini Naxos, Italy
- 14th International Conference on Synthesis, Modeling, Analysis and Simulation Methods and Applications to Circuit Design, SMACD 2017, Giardini Naxos, Italy, June 12-15, 2017. IEEE 2017, ISBN 978-1-5090-5052-9
- Vadim Borisov, Kerstin Langner, Jürgen Scheible, Benjamin Prautsch:
A novel approach for automatic common-centroid pattern generation. 1-4 - Philipp Tertel, Lars Hedrich:
Real-time emulation of block-based analog circuits on an FPGA. 1-4 - Florin Burcea, Andreas Herrmann, Aditya Gupta, Helmut Graeb:
A new robustness optimization methodology for MEMS-IC systems. 1-4 - Dalibor Biolek
, Viera Biolková, Zdenek Kolka:
Modified MIM model of titanium dioxide memristor for reliable simulations in SPICE. 1-4 - Matteo Lodi, Alberto Oliveri
Low-cost acquisition method for on-line inductor characterization in switched power converters. 1-4 - Florian Protze, David Ihle, Martin Kreißig, Udo Jörges, Frank Ellinger:
Simulation of broadband transient signals in frequency-domain using impedance parameters. 1-4 - Ana Dalia Pano-Azucena, Esteban Tlelo-Cuautle
Prediction of chaotic time-series with different MLE values using FPGA-based ANNs. 1-4 - Shushanik Karapetyan, Ulf Schlichtmann
20nm FinFET-based SRAM cell: Impact of variability and design choices on performance characteristics. 1-4 - Nicoleta Cucu Laurenciu, Sorin Dan Cotofana
Fast and accurate workload-level neural network based IC energy consumption estimation. 1-4 - Aya Mohamed, Mohamed Dessouky, Sherif M. Saif:
Analog layout placement retargeting using Satisfiability Modulo Theories. 1-4 - Juan David Bastidas-Rodriguez, Daniel Gonzalez
Model of series-parallel photovoltaic arrays designed for parallel computing. 1-4 - Shengyu Duan
An ageing-aware digital synthesis approach. 1-4 - Engin Afacan, Günhan Dündar
Inversion coefficient optimization assisted analog circuit sizing tool. 1-4 - Maike Taddiken, Theodor Hillebrand, Steffen Paul, Dagmar Peters-Drolshagen:
Variation- and degradation-aware stochastic behavioral modeling of analog circuit components. 1-4 - Elena Della Valle, Francesca Apollonio
Numerical estimation of a 10 nanosecond pulse effects on non-uniformly distributed liposomes. 1-3 - Nuno C. Lourenço
New mapping strategies for pre-optimized inductor sets in bottom-up RF IC sizing optimization. 1-4 - Raphael Andreoni Camponogara Viera
Importance of IR drops on the modeling of laser-induced transient faults. 1-4 - Matej Rebersek, Eva Pirc, Damijan Miklavcic
Modeling and optimization of Blumlein nanosecond pulse generator for experiments on planar lipid bilayers. 1-4 - Ingrid Kovacs, Marina Dana Topa, Andi Buzo
An accurate yield estimation approach for multivariate non-normal data in semiconductor quality analysis. 1-4 - Pietro Burrascano, Stefano Laureti
Chirp design in a pulse compression procedure for the identification of non-linear systems. 1-4 - Fernando García-Redondo
Advanced integration of variability and degradation in RRAM SPICE compact models. 1-4 - Hao Yu, Guoyong Shi:
Developing a web-based symbolic circuit analysis tool for learning and design aid. 1-4 - Roberto Di Rienzo
Simulation platform for analyzing battery parallelization. 1-4 - Mehdi Nasrollahpour, Rahul Sreekumar, Sotoudeh Hamedi-Hagh:
Low power comparator with offset cancellation technique for Flash ADC. 1-4 - Roberto La Rosa, Giulio Zoppi, Alessandro Finocchiaro, Giuseppe Papotto
An over-the-distance wireless battery charger based on RF energy harvesting. 1-4 - Ricardo Martins
Layout-aware challenges and a solution for the automatic synthesis of radio-frequency IC blocks. 1-4 - Aykut Kabaoglu
A cryogenic modeling methodology of MOSFET I-V characteristics in BSIM3. 1-4 - Luigi G. Campana, Paolo Di Barba, Maria Evelina Mognaschi, Marco Bullo, Fabrizio Dughiero
Electrical resistance in inhomogeneous samples during electroporation. 1-4 - Javier Diaz-Fortuny
TARS: A toolbox for statistical reliability modeling of CMOS devices. 1-4 - Rocco Morello, Roberto Di Rienzo
Tuning of Moving Window Least Squares-based algorithm for online battery parameter estimation. 1-4 - Javier Diaz-Fortuny
A transistor array chip for the statistical characterization of process variability, RTN and BTI/CHC aging. 1-4 - Mehdi Nasrollahpour, Sotoudeh Hamedi-Hagh, Yasin Bastan
ECP technique based capacitor-less LDO with high PSRR at low frequencies, -89dB PSRR at 1MHz and enhanced transient response. 1-4 - Agnese Denzi, Hanna Hanna, Franck M. Andre, Lluis M. Mir, Francesca Apollonio
Microdosimetry for pulsed E fields in a realistic models of cells and endoplasmic reticulum. 1-3 - Davide Patti, Salvatore Pennisi, Salvatore Lombardo, Giuseppe Nicotra
Towards a nanofabricated vacuum cold-emitting triode. 1-4 - Kateryna Stoyka, Nicola Femia, Giulia Di Capua
Optimizing power converters with partially saturated inductors by evolutionary algorithms. 1-4 - Martin Kreißig, Frank Ellinger:
Extended analysis of idealized class-E operation with finite DC-feed inductance and preservation of zero volt switching at variable load. 1-4 - Giorgio Antonino Vazzana, Alfio Dario Grasso
A toolbox for the symbolic analysis and simulation of linear analog circuits. 1-4 - Benjamin Prautsch, Uwe Eichler
MESH: Explicit and flexible generation of analog arrays. 1-4 - Axel Hald, Johannes Seelhorst, Pekka Herzogenrath, Jürgen Scheible, Jens Lienig:
A new method for the analysis of movement dependent parasitics in full custom designed MEMS sensors. 1-4 - Raffaele De Rose
Impact of voltage scaling on STT-MRAMs through a variability-aware simulation framework. 1-4 - Patrizia Lamberti
FEM-based numerical simulation supporting experimentally tested Electrochemotherapy protocols. 1-4 - Javier Martín-Martínez, Rosana Rodríguez, Montserrat Nafría
Statistical characterization and modeling of random telegraph noise effects in 65nm SRAMs cells. 1-4 - Andreas Furtig, Moritz Paschke, Lars Hedrich:
Comparing code coverage metrics for analog behavioral models. 1-4 - Antonio Toro-Frías, Pablo Martín-Lloret, Rafael Castro-López
Including a stochastic model of aging in a reliability simulation flow. 1-4 - Yaoyao Ye, Taeyoung Kim
Comprehensive detection of counterfeit ICs via on-chip sensor and post-fabrication authentication policy. 1-4 - Engin Afacan, Mustafa Berke Yelten, Günhan Dündar
Review: Analog design methodologies for reliability in nanoscale CMOS circuits. 1-4 - Patrizia Lamberti
A coarse 3D lattice network modeling electroporation phenomenon in an excitable cell. 1-4 - Ibrahim Kagan Aksoyak, Kaan Balaban, Hamdi Torun
Compact model based design space exploration for CMOS hall effect sensors. 1-4 - Nicola Femia, Giulia Di Capua
Impact of receiver conversion configuration on the efficiency of Wireless Power Transfer Systems. 1-4 - Pablo Martín-Lloret, Antonio Toro-Frías, Rafael Castro-López
CASE: A reliability simulation tool for analog ICs. 1-4 - Reem El-Adawi, Mohamed Dessouky:
Monte Carlo general sample classification for rare circuit events using Random Forest. 1-4 - Andres Camilo Henao-Munoz
Energy management system for an isolated microgrid with photovoltaic generation. 1-4 - Martin Grabmann, Georg Gläser:
Comparing apples and oranges: Evaluating model-coverage using acceptance regions. 1-4 - Caterina Merla, Andrei G. Pakhomov
Frequency spectra of induced transmembrane potential correlate with nanosecond bipolar pulse cancellation of electropermeabilization. 1-2 - Iike Ercan, Omercan Susam, Mustafa Altun
Synthesis and fundamental energy analysis of fault-tolerant CMOS circuits. 1-4 - Jacek Nowak, Dominik Krausse, Mahmoud Mona, Ralf Sommer, Johannes Stegner:
Design of a LTE-receiver using a design methodology for multiphysical RF systems. 1-4 - Amel Garbaya, Mouna Kotti, Mourad Fakhfakh, Esteban Tlelo-Cuautle
On the accurate modeling of analog circuits via the Kriging metamodeling technique. 1-4 - Pradeep Chawda, Makram Mansour, Maurizio Granato:
A novel methodology for electronic design exchange. 1-4 - Fábio Passos
Systematic design of a voltage controlled oscillator using a layout-aware approach. 1-4 - Mesut Atasoyu, Mustafa Altun
Spin-torque memristor based offset cancellation technique for sense amplifiers. 1-4 - Giulia Di Capua
Ferrite inductor models for switch-mode power supplies analysis and design. 1-4 - Saverio Panarello, Claudia Triolo
Improving ICs reliability with high speed thermal mapping. 1-4 - Georg Gläser, Martin Grabmann, Gerrit Kropp, Andreas Furtig:
Automated generation of system-level AMS operating condition checks: Your model's insurance policy. 1-4 - Nicola Femia, Giulia Di Capua
Harmonic analysis of diode-bridge rectifiers in Wireless Power Transfer System. 1-4 - Andreas Herrmann, Christof Hielscher, Alexander Mueller, Gisbert Hoelzer, Helmut Graeb:
Realistic worst-case parameter sets for MEMS technologies. 1-4 - Sascha Heinssen, Maike Taddiken, Theodor Hillebrand, Steffen Paul, Dagmar Peters-Drolshagen:
Behavioral modeling of a sensor interface circuit including various non-idealities. 1-4 - Murat Pak, Francisco V. Fernández
Optimization of a MEMS accelerometer using a multiobjective evolutionary algorithm. 1-4 - Saiyd Ahyoune
Extending the frequency range of quasi-static electromagnetic solvers. 1-4 - Stefania Romeo
Circuital modelling for electroporation. 1-4 - Youssef Driouich, Mimmo Parente, Enrico Tronci
Modeling cyber-physical systems for automatic verification. 1-4 - Okan Zafer Batur
LNA-ESD-PCB codesign for robust operation of IR-UWB non-coherent receiver. 1-4
manage site settings
To protect your privacy, all features that rely on external API calls from your browser are turned off by default. You need to opt-in for them to become active. All settings here will be stored as cookies with your web browser. For more information see our F.A.Q.
last updated on 2024-11-13 23:36 CET by the dblp team
all metadata released as open data under CC0 1.0 license
see also: Terms of Use | Privacy Policy | Imprint
dblp was originally created in 1993 at:
since 2018, dblp has been operated and maintained by:
the dblp computer science bibliography is funded and supported by: