default search action
IAS 2014: Vancouver, BC, Canada
- 2014 IEEE Industry Application Society Annual Meeting, Vancouver, BC, Canada, October 5-9, 2014. IEEE 2014
- Charles G. Noll:
Improving safety of electrostatic processes through consensus standards. 1-3 - G. S. Peter Castle, William D. Greason:
Updated history of the electrostatic processes committee of the IAS. 1-4 - Kazuo Shimizu
, Yoshinori Mizuno, Marius Blajan
Characteristics of atmospheric non-thermal microplasma actuator. 1-6 - Ahmed Gad, Shesha H. Jayaram:
Processing of carbonated beer by pulsed electric fields. 1-5 - Thami Zeghloul
Tribocharging phenomena in sliding contacts between polymeric materials. 1-4 - Kelly Robinson
Maximize static dissipator neutralization efficiency. 1-6 - Husam Osman, O. Ghazian, Kazimierz Adamiak, G. S. Peter Castle, H. T. Fan, J. Simmer:
The charging level of a ligament-droplet system atomized in a uniform electric field. 1-7 - Toshiyuki Sugimoto, K. Furutachi, Yoshio Higashiyama:
An electrostatic field driven ionizer for a moving charged target. 1-6 - Hisashi Shio:
Triboelectrification of ice. 1-5 - Rajesh Sharma, Keith Arnoult, Sunil Kumar Ramasahayam, Saad Azam, Zachary Hicks, Ali Shaikh, Tito Viswanathan:
Photo-electrochemical hydrogen production using novel carbon based material. 1-4 - Shungo Zen, Ryo Ono
Development of low-temperature sintering technique for plastic dye-sensitized solar cells. 1-4 - Malay K. Mazumder, Mark Horenstein, Jeremy Stark, John N. Hudelson, Arash Sayyah, Calvin Heiling, Julius Yellowhair:
Electrodynamic removal of dust from solar mirrors and its applications in concentrated solar power (CSP) plants. 1-7 - Tomoyuki Kuroki, Masanari Tanaka, Masaaki Okubo:
Effect of water spray on adsorbed toluene decomposition by nonthermal plasma flow. 1-6 - Wamadeva Balachandran, Radu Beleca, Nadarajah Manivannan, Maysam Abbod
Non-thermal plasma system for marine diesel engine emissions control. 1-9 - Kazuo Shimizu
Basic study on indoor air quality improvement by atmospheric plasma. 1-6 - Abdelkader Mekhalef
Study of a tribo-aero-electrostatic separator for mixtures of micronized insulating materials. 1-7 - Khouira Senouci, Karim Medles, Sara Messal, Lucien Dascalescu:
Multivariate control for three variables of an industrial roll-type electrostatic separator. 1-7 - Mohamed Miloudi, Lucian Dascalescu, Jia Li, Karim Medles, Amar Tilmatine:
Performance improvement of a separator tribo-electrostatic aero for granular materials plastics recycling of waste electrical and electronic equipment. 1-6 - Ali Fatihou, Lucien Dascalescu, Noureddine Zouzou
Interpretation of surface potential measurements performed with the vibrating capacitive probe of an electrostatic voltmeter. 1-6 - Sylvain Baudon, Petru V. Notingher
Advances in electric charge measurements in semi-conducting structures by non-destructive thermal methods. 1-7 - Jean-Charles Laurentie, Hanen Yahyaoui, Petru V. Notingher
Contactless electric field and space charge measurement across solid dielectrics: A fully non-intrusive thermal technique. 1-4 - Norbert Grass, Thomas Fischer:
High voltage power supply and control technologies for electrostatic precipitators in biomass applications. 1-4 - Yutaka Soda, Tetsuji Oda:
Characteristics of contact discharge using 6GHz current probe. 1-4 - Seddik Touhami, Wessim Aksa, Karim Medles, Amar Tilmatine, Lucien Dascalescu:
Numerical simulation of the trajectories of insulating particles in a tribo-aero-electrostatic separator. 1-6 - Youssouf Brahami, Amar Tilmatine, Rabah Ouiddir, Abdelber Bendaoud
Experimental modelling of a new tribo-electrostatic separation process for micronized plastics. 1-5 - Wessim Aksa, Karim Medles, Mohammed Rezoug, Rabah Ouiddir, Abdelber Bendaoud
Modeling and optimization of a separator for granular mixtures composed of multiple insulating materials. 1-7 - Maciej A. Noras
Modeling detection and electrical parameters of rapidly moving charged objects. 1-4 - Viral K. Patel, Jamal Seyed-Yagoobi:
Recent experimental advances in electrohydrodynamic conduction pumping research. 1-10 - Hak-Joon Kim, Bangwoo Han, Chang-Gyu Woo, Yong-Jin Kim:
Submicron PM removal of an ESP combined with a metallic foam filter for large volumetric diesel engines. 1-6 - Fernando Sanz-Serrano, Carlos Sagüés, Sergio Llorente:
Induction heating appliance with a mobile double-coil inductor. 1-7 - Sheng-Yen Lu, Li Wang, Te-Ming Lo:
Integration of wind-power and wave-power generation systems using a DC micro grid. 1-8 - Darren Rabosky, Pankaj Kumar Sen:
Optimization techniques for improved power factor and energy efficiency for batch industrial processes. 1-6 - Phatiphat Thounthong
DC bus stabilization of Li-Ion battery based energy storage for hydrogen/solar power plant for autonomous network applications. 1-8 - Franklin L. Quilumba
An overview of AMI data preprocessing to enhance the performance of load forecasting. 1-7 - Lu Miao, Jinyu Wen
Coordinated control strategy of wind turbine generator and energy storage equipment for frequency support. 1-7 - Salman Mohagheghi
Maintenance-centric energy management of industrial plants assisted by demand response. 1-9 - Shunsuke Sakae, Akiko Takahashi, Jun Imai, Shigeyuki Funabiki:
Energy management method for residential distributed generation system using photovoltaic cells and fuel cell vehicle. 1-6 - Hussam Khasawneh
Supercapacitor cycle life equalization in a microgrid through flexible distribution of energy and storage resources. 1-8 - Piampoom Sarikprueck, Wei-Jen Lee, Asama Kulvanitchaiyanunt, Victoria C. P. Chen, Jay M. Rosenberger:
Novel hybrid market price forecasting method with data clustering techniques for EV charging station application. 1-9 - Philipp Spichartz, Philip Dost
Examination and measurement of range extension using different recuperation modes in electric vehicles. 1-9 - Stijn Derammelaere
Energy efficiency measurement procedure for gearboxes in their entire operating range. 1-9 - Jingguo Ren, Kejun Li, Lijun Sun, Jianguo Zhao, Yongliang Liang, Wei-Jen Lee, Zhaohao Ding, Ying Sun:
A coordination control strategy of voltage source converter based MTDC for offshore wind farms. 1-9 - Meng Liu, Franklin L. Quilumba
Dispatch scheduling for a wind farm with hybrid energy storage based on wind and LMP forecasting. 1-8 - Zhaohao Ding, Wei-Jen Lee, Juanjuan Wang:
Stochastic resource planning strategy to improve the efficiency of microgrid operation. 1-8 - Dao H. Vu, Kashem M. Muttaqi
Short-term load forecasting using regression based moving windows with adjustable window-sizes. 1-8 - Meng Liu, Franklin L. Quilumba
A collaborative design of aggregated residential appliances and renewable energy for demand response participation. 1-8 - Spyridon V. Giannoutsos, Stefanos N. Manias:
A data-driven process control topology for energy efficiency optimization of fan operation in E/R ventilation system of marine vessels. 1-10 - Dan Wang
Electronic power transformer to secure the power supply of a mission critical microgrid. 1-8 - Felipe C. F. Azevedo, M. Nasir Uddin:
Recent advances in loss minimization algorithms for IPMSM drives. 1-9 - Jingbo Liu, Takayoshi Matsuo, Thomas A. Nondahl, Peter B. Schmidt, Timothy M. Rowan, Robert J. De Lange:
Implementation and performance of position sensorless PMSM control in industrial drives. 1-8 - Wei Sun, Yong Yu, Gaolin Wang, Dianguo Xu:
Accurate inverter error compensation using self-tuning stator current estimation error in sensorless induction motor drives. 1-6 - Wei Sun, Yong Yu, Gaolin Wang, Dianguo Xu:
A novel design method for adaptive full order observer feedback matrix and speed estimation algorithm. 1-7 - Md. Rubaiyat Tanvir Hossain, M. A. Choudhury, M. Nasir Uddin:
A three-phase boost AC-AC voltage converter. 1-8 - Seung-Mook Baek:
Design of robust voltage control system for improving transient and voltage stability on distributed generation expansion. 1-8 - Liping Guo, Mohammad Aqil
Design and evaluation of digital control system for power converters at Advanced Photon Source. 1-5 - M. Askaria, Mahmoud Moghavvemi
An offset-free multivariable model predictive control for quadruple tanks system. 1-8 - Lesedi Masisi
Comparison of two modulation strategies for a three level inverter synchronous reluctance motor (SynRM) drive. 1-7 - Yuji Kubo, Takayuki Moroi, Kouki Matsuse, Hisao Kubota, Kaushik Rajashekara:
Independent rated speed control of two induction motors fed by a four-leg inverter. 1-6 - M. A. Hannan
Real-time testing of a fuzzy logic controller based grid-connected photovoltaic inverter system. 1-8 - M. Nasir Uddin, HongBin Zou, Felipe C. F. Azevedo:
Online loss minimization based adaptive flux observer for direct torque and flux control of PMSM drive. 1-7 - Amarendra Edpuganti
Fundamental switching frequency optimal pulsewidth modulation of medium voltage cascaded seven-level inverter. 1-7 - Zhenyao Xu, Dong-Hee Lee, Jin-Woo Ahn:
Design of a novel 6/5 segmental rotor type switched reluctance motor. 1-7 - Akitoshi Nakajima, Kiyoya Sakaki, Kouki Matsuse, Hisao Kubota, Kaushik Rajashekara:
Vector controlled two induction motor drives fed by matrix converter. 1-6 - Amarendra Edpuganti
A survey of low-switching frequency modulation techniques for medium-voltage multilevel converters. 1-8 - Shailendra Sharma
Single-phase power generation employing VFC for standalone three-phase doubly wound asynchronous generator. 1-8 - S. F. Rabbi, M. Halloran, T. LeDrew, A. Matchem, M. Azizur Rahman:
Modeling and V/F control of a hysteresis interior permanent magnet motor. 1-8 - Philip Dost
On opportunities of dimensioning a (virtual) flux based hysteresis controller for minimal switching frequency. 1-9 - Azziddin M. Razali
Implementation of d-q decoupling and feed-forward current controller for grid connected three phase voltage source converter. 1-8 - Philip Dost
On influence of various modulation schemes on a PMSM within an electric Vehicle. 1-10 - Garin M. Schoonhoven, M. Nasir Uddin:
MTPA and FW based robust nonlinear speed control of IPMSM drive using Lyapunov stability criterion. 1-8 - Sherif A. Abdelrazek, Sukumar Kamalasadan
Integrated control of battery energy storage management system considering PV capacity firming and energy time shift applications. 1-7 - Reza Yousefian, Sukumar Kamalasadan
Design and real-time implementation of optimal power system wide area system-centric controller based on temporal difference learning. 1-7 - Seyedmahdi Moghadasi, Sukumar Kamalasadan
Real-time optimal scheduling of smart power distribution systems using integrated receding horizon control and convex conic programming. 1-7 - D. Ranamuka, Ashish P. Agalgaonkar
Mitigating tap-changer limit cycles in modern electricity networks embedded with local generation units. 1-8 - Ignace Rasoanarivo, Matthieu Urbain, François-Michel Sargos, Babak Nahid-Mobarakeh
Improving EMC behavior and energy efficiency of BOOST converter with power switches having low switching frequency and high dv/dt. 1-10 - Kashem M. Muttaqi
A novel tuning method for advanced line drop compensator and its application to response coordination of distributed generation with voltage regulating devices. 1-8 - Ahmed M. A. Haidar
Behavioral characterization of electric vehicle charging loads in a distribution power grid through modeling of battery chargers. 1-8 - Giusi Quartarone, Norma Anglani:
Mixed-integer linear programming for the optimal design and management of air compressor rooms. 1-9 - Najla Haje Obeid
Modeling and diagnostic of incipient inter-turn faults for a three phase permanent magnet synchronous motor. 1-8 - Robert A. Sowah
Hardware module design of a real-time multi-sensor fire detection and notification system using fuzzy logic. 1-6 - Robert A. Sowah
A web-based communication module design of a real-time multi-sensor fire detection and notification system. 1-6 - Sabha Raj Arya, Krishan Kant, Ram Niwas, Bhim Singh
Power quality improvement in isolated distributed generating system using DSTATCOM. 1-8 - Yingjie Tan, Lasantha Meegahapola
Suboptimal MPPT control for power management in PV-diesel remote area power supply systems. 1-8 - Nicolae Brinzei, Babak Nahid-Mobarakeh
Reliability assessment of adjustable speed drives using state Markov models. 1-8 - S. K. Bunga, Ahmed H. Eltom, N. Sisworahardjo:
Impact of Plug-in Electric Vehicle battery charging on a distribution system. 1-5 - Farshid Shariatzadeh, Sayonsom Chanda, Anurag K. Srivastava, Anjan Bose:
Real time benefit computation for electric distribution system automation and control. 1-8 - Song Bor Chiang, KuoHsiang Chien:
The optimization of color-mixed LED lighting. 1-3 - Marcelo R. Cosetin, T. E. Bolzan, Paulo Cesar Vargas da Luz, Marcelo Freitas da Silva, J. Marcos Alonso
Dimmable single-stage SEPIC-Ćuk converter for LED lighting with reduced storage capacitor. 1-7 - Rafael A. Pinto, J. Marcos Alonso
A new technique to equalize branch currents in multiarray LED lamps based on variable inductor. 1-9 - William Witt, Ana Vladan Stankovic:
Forecasting electrical parameters of mass-produced LED luminaire using the Monte Carlo method. 1-9 - Leos Kukacka, Pascal Dupuis
Simplified models of LED ballasts for spice. 1-5 - Rikardo Simanjuntak
Power quality of energy saving lamps under wide voltage variations. 1-7 - Maicol F. de Melo, André Luís Kirsten
Bidirectional Flyback converter connected to the grid and applied to a distributed microgeneration and street lighting system. 1-6 - Jeferson Fraytag
Low-frequency burst modulation applied to single-stage SEPIC half-bridge topology to feed an electrodeless fluorescent lamp with dimming capability. 1-6 - Harpreet Singh Grover, Francis P. Dawson, Dave M. Camm, Yann Cressault, Markus Lieberer:
Application of a plasma Arc lamp for thermal processing of semiconductor wafers. 1-8 - Marina S. Perdigão
A review on variable inductors and variable transformers: Applications to lighting drivers. 1-8 - Ray-Lee Lin, Jhong-Yan Tsai, José Marcos Alonso Alvarez
Four-parameter Taylor series based light-emitting-diode model. 1-6 - Wei Xiong, Ana Vladan Stankovic:
Program start fluorescent ballast with clamped-Q resonant filament heating circuit. 1-7 - Wei Xiong, Ana Vladan Stankovic:
A true parallel lamp operation universal program start dimming ballast platform based on decoupled half-bridge inverter. 1-9 - Walter Kaiser, Ricardo P. Marques:
EEFL (External Electrode Fluorescent Lamp) driving methods. 1-7 - Ray-Lee Lin, Jhong-Yan Tsai, David Buso, Georges Zissis
OLED equivalent circuit model with temperature coefficient and intrinsic capacitor. 1-8 - Hiroshi Unno, Youichi Takashima, Kazutake Uehira:
Design considerations for new 3D image display system with improved compatibility with invisibility and readability. 1-8 - Kazutake Uehira, Kayo Suzuki, Hiroaki Ikeda:
Applications of optoelectronic watermarking technique to new business and industry systems utilizing flat-panel displays and smart devices. 1-9 - Pascal Dupuis
LED lighting - Reduce the power consumption and increase the users comfort. 1-5 - Kenichi Aoshima, Hidekazu Kinjo, Kenji Machida, Daisuke Kato, Kiyoshi Kuga, Tomoyuki Mishina, Hiroshi Kikuchi, Naoki Shimidzu:
Three dimensional motion picture technologies. 1-5 - Sam Morello, Thomas J. Dionise, Thomas L. Mank:
Comprehensive analysis to specify a static var compensator for an Electric Arc Furnace upgrade. 1-11 - Andre S. L. Costa, Rodrigo R. Bastos
A critical analysis of standard methods for characterization of electrical steels: Losses in high speed induction motors. 1-8 - Cheng-Tsung Liu, Bo-Yan Chang, Kuo-Yuan Hung, Sheng-Yang Lin:
Cutting and punching impacts on laminated electromagnetic steels to the designs and operations of synchronous reluctance motors. 1-6 - Bao Anh Nguyen, Quoc Dung Phan, Duy Minh Nguyen, Kien Long Nguyen, Olivier Durrieu, Pascal Maussion
Parameter identification method for a 3-phase induction heating system. 1-7 - John Pittner, Marwan A. Simaan
Advanced control to reduce the likelihood of cobbles in the tandem rolling of hot metal strip. 1-8 - Rubén Usamentiaga, Julio Molleda, Daniel F. García, Francisco G. Bulnes, Joaquín Entrialgo
Flatness measurement using two laser stripes to remove the effects of vibrations. 1-8 - Igor A. Pires, Marcelo Murta, Braz de Jesus Cardoso Filho:
Active series reactor for electric arc furnace based on electronic power converter. 1-8 - E. A. Cano-Plata
Electric arc furnace model in distribution systems. 1-7 - Mennan Güder
Data mining framework for power quality event characterization of iron and steel plants. 1-11 - Leonardo Silva, Karina Giancotti, Francisco Amaro, Igor A. Pires:
Analysis of burn out and random trips at starting of a 2984kW induction motor driving a main blower. 1-5 - Abdolrasul Rasuli, Shahram Tafazoli, William G. Dunford:
Dynamic modeling, parameter identification, and payload estimation of mining cable shovels. 1-9 - G. Matias Valenzuela, M. Anibal Valenzuela:
Integrated mechanical-electrical modeling of an AC electric mining shovel and evaluation of power requirements during a truck loading cycle. 1-10 - Luis Morán
Voltage regulation in mine power distribution systems: Problems and solutions. 1-7 - Pablo Aqueveque
Energy quality and efficiency of an open pit mine distribution system: An evaluation. 1-7 - Mohsen Ghaffarpour Jahromi, Galina Mirzaeva
DC power vs AC power for mobile mining equipment. 1-8 - William Jacobs, Melinda R. Hodkiewicz
A cost-benefit analysis of electric loaders to reduce diesel emissions in underground hard rock mines. 1-10 - Lincan Yan, Joseph Waynert, Carl Sunderman, Nicholas W. Damiano:
Statistical analysis and modeling of VLF/ELF noise in coal mines for through-the-earth wireless communications. 1-5 - Jingcheng Li, Jacob L. Carr, Adam Smith, Joseph A. Waynert:
A transferrable shell-based magnetic flux density distribution model for a magnetic proximity detection system. 1-7 - David C. Mazur
Advancements in vibration monitoring for the mining industry. 1-8 - Miguel Angel Reyes, Thomas Novak:
Injury surveillance and safety considerations for large-format, lead-acid batteries used in mining applications. 1-7 - Liang Zhang, Xiaosheng Liu, Dianguo Xu:
A novel security monitoring system of coal mine based on power line communication dynamic routing technology. 1-6 - Devon Jenkins, Anshuman Bhargava:
Selecting the proper LED light fixture to enhance safety in harsh & hazardous environments. 1-4 - Frederico A. L. Souza, P. C. T. Pereira, Helder de Paula, Braz de Jesus Cardoso Filho, Anderson V. Rocha:
Motor drive systems reliability: Impact of the environment conditions on the electronic component failure rates. 1-8 - Helder de Paula, Wellington P. de Almeida, Philipe Pereira, Anderson V. Rocha, Braz de Jesus Cardoso Filho:
Driving AC motors through long distances with DC transmission: Experimental results. 1-7 - P. Pablo Castro, M. Anibal Valenzuela:
Modeling and evaluation of cycloconverter-fed, two-stator windings SAG mill drive. Part I: Modeling options. 1-8 - P. Pablo Castro, M. Anibal Valenzuela:
Modeling and evaluation of cycloconverter-fed, two-stator windings SAG mill drive. Part II: Starting evaluation. 1-8 - David B. Durocher, David Loucks:
Infrared windows applied in switchgear assemblies: Taking another look. 1-6 - Priscila M. Esteves, Marcelo M. Stopa, Braz de Jesus Cardoso Filho, Roberto Galery:
Charge behavior analysis in ball mill by using estimated torque. 1-7 - Eduardo P. Wiechmann
Energy quality and efficiency of an open pit mine distribution system: An improvement. 1-7 - Davide Bavastro, Aldo Canova, Fabio Freschi
Magnetic field mitigation at power frequency: Design principles and case studies. 1-8 - Mustafa Farhadi, Osama A. Mohammed
Performance enhancement of actively controlled hybrid DC microgrid with pulsed load. 1-8 - O. J. Soto-Marin, E. A. Cano-Plata
Rural distribution meter failures in Colombia. 1-6 - J. Curtiss Fox, Mark H. McKinney, E. Randolph Collins, Konstantin Bulgakov, Thomas E. Salem:
A multi-megawatt test facility for renewable energy research. 1-5 - Mollah R. Alam
Characterizing voltage sags and swells using three-phase voltage ellipse parameters. 1-9 - Giuseppe Parise
Wise port & business energy management: Portfacilities, electrical power distribution. 1-6 - Giuseppe Parise
Conservative measurements of touch and step voltages by auxiliary electrodes at reduced distance. 1-7 - Giuseppe Parise
Grounding systems efficiency in areas with reduced accessibility. 1-5 - Giuseppe Parise
Grounding and bonding: A combined protection against electric shock. 1-5 - Giuseppe Parise
Safety system with harmless first fault: Complete & medical IT-system. 1-6 - Luigi Martirano
Simulation and sensitivity analysis of a fuzzy-based building automation control system. 1-7 - Xiaodong Liang
An effective approach to reducing arc flash hazards in power systems. 1-9 - Xiaodong Liang
Load filter design method for medium voltage drive applications in electrical submersible pump systems. 1-14 - Sheng-Yen Lu, Li Wang, Shun-Chin Ke, Che-Hao Chang, Zhi-Hao Yang:
Evaluation of measured power-quality results of a wind farm connected to Taiwan power system. 1-7 - Sheng-Yen Lu, Li Wang, Shun-Chin Ke, Che-Hao Chang, Zhi-Hao Yang:
Analysis of measured power-quality results of a PV system connected to Peng-Hu power system. 1-7 - Sheng-Yen Lu, Li Wang
A preliminary study on total energy-density variations of a Buddhist temple in Taiwan through long-term field measurements of electric-field strength. 1-8 - Kazuya Fukunaga, Akiko Takahashi, Jun Imai, Shigeyuki Funabiki:
Cooperative control of power conditioners in high-voltage distribution systems comprising a large number of PV systems. 1-6 - Philipe Pereira, Helder de Paula, Braz de Jesus Cardoso Filho, Jose A. S. Brito, Anderson V. Rocha:
Analysis of high frequency phenomena in medium-power photovoltaic systems. 1-8 - Jesus Jativa-Ibarra, Gabriela Navarro-Mendez, Franklin L. Quilumba
Field measurements, modeling, and analysis of power system harmonics caused by industrial customers. 1-13 - Nadia Smith, Roy McCann
Performance analysis of a boost inverter with a silicon carbide device for commercial applications. 1-9 - Yi-Hung Liao, Li-Ching Yang:
A novel high-power-factor single-stage converter for micro-scale wind power generation system. 1-8 - Chun-Lien Su, Chan-Nan Lu, Kai-En Zheng, Jen-Hao Teng
Analysis of PEV charging impact on distribution transformer aging for charging station transformer design. 1-8 - Bruce A. Harvey:
Long term field study of lightning surges through traffic monitoring in-pavement sensors. 1-6 - Peter E. Sutherland
Harmonics in electrical power systems: Effects of new technologies. 1-13 - Peter E. Sutherland
Snubber circuit design for transformers in urban high rise office building. 1-19 - Robert Arno, Neal Dowling, Stephen Fairfax, Robert Schuerger, Joseph Weber:
What is RCM and How could it be applied to the critical loads? 1-8 - Hui Zhong, Lin Zhao, Xiuhe Wang, Xiao Li:
Design and analysis of a three-phase rotary transformer for doubly fed induction generators. 1-6 - Won-Sik Moon, Jae-Chul Kim, Ara Jo, Sun-Bae Bang, Won-Sik Ko:
Ignition characteristics of residential series arc fault in 220V HIV wire. 1-5 - Zhiheng Ma, Zheng Xu, Yujun Li:
Harmonic analysis and simulation of multi-pulse rectifiers applied in electrolysis industry. 1-5 - Ajit A. Renjit, Mahesh S. Illindala
Stability robustness analysis and its improvement for an industrial microgrid. 1-8 - Eduardo H. Enrique, Ibro Hadzismajlovic, Ben Shen:
Considerations in the design of grounding system for solar farms. 1-8 - M. Jan E. Alam, Kashem M. Muttaqi
A controllable local peak shaving strategy for effective utilization of PEV battery capacity for distribution network support. 1-8 - Fabio Freschi
Electrical safety of aeronautical ground lighting systems. 1-7 - M. Nasir Uddin, Nirav Patel:
Speed sensorless based adaptive maximum power point tracking control of IPM synchronous wind generator. 1-8 - Saleh A. Saleh, A. S. Aljankawey, M. S. Abu Khaizaran, Basim Alsayid
Influences of power electronic converters on current-voltage behaviors during faults in DGUs-Part I: Wind energy conversion systems. 1-8 - Saleh A. Saleh, A. S. Aljankawey, Basim Alsayid
Influences of power electronic converters on current-voltage behaviors during faults in DGUs-Part II: Photovoltaic systems. 1-8 - Saleh A. Saleh, A. S. Aljankawey, Ryan Meng, J. Meng:
Instantaneous apparent power-based anti-islanding for distributed co-generation systems. 1-8 - Aurélio M. L. Coelho
Loss-of-excitation protection and underexcitation controls correlation for synchronous generators in a real time digital simulator. 1-10 - Chen Yuan, Mohammed A. Haj-ahmed
An MVDC microgrid for a remote area mine site: Protection, operation and control. 1-9
manage site settings
To protect your privacy, all features that rely on external API calls from your browser are turned off by default. You need to opt-in for them to become active. All settings here will be stored as cookies with your web browser. For more information see our F.A.Q.
last updated on 2024-11-13 23:36 CET by the dblp team
all metadata released as open data under CC0 1.0 license
see also: Terms of Use | Privacy Policy | Imprint
dblp was originally created in 1993 at:
since 2018, dblp has been operated and maintained by:
the dblp computer science bibliography is funded and supported by: