Abstract – New shield-type current-probe was compared to a conventional type current-probe by measuring frequency response and TLP pulse.
The shield type current-probe, which provided low distortion and 6GHz BW, approximated the input waveform. The contact discharge was investigated using 4pF to ...
Oct 22, 2024 · Characteristics of contact discharge using 6GHz current probe ... contact discharges with the current waveform specified in IEC61000-4-2 ...
What is ESD ? • Electrostatic Discharge (ESD) is an exchange of charge between two objects, It occurs when contact is established or if the ...
compared with contact discharge, air discharge produces the higher current peaks and the steeper rising slopes. In VC=2.5 kV, it is found that the fast ...
In this article, the results of a proposed methodology, based on current probe measurements and a frequency response compensation method, published in recent ...
In the case of CDM stress, this is the IC itself that is initially charged and then discharged by contact with a conductive surface. The CDM current depends on ...
Low voltage electrostatic discharge phenomena are experimentally examined through wet-type and dry type relays as high speed switch.
This test is for electrical and electronic equipment subjected to electrostatic discharge (ESD) from operators/personnel directly touching equipment.
Missing: Characteristics | Show results with:Characteristics
These probes integrate many of the features and characteristics needed for today's general-purpose, high-speed differential probing - especially in digital.