Nothing Special   »   [go: up one dir, main page]

CERN Accelerating science

CERN Document Server 2,051 registres trobats  1 - 10següentfinal  anar al registre: La cerca s'ha fet en 0.29 segons. 
1.
HD1: design and fabrication of a 16 Tesla Nb$_3$Sn dipole magnet / Hafalia, A R (LBNL, Berkeley) ; Bartlett, S E (LBNL, Berkeley) ; Caspi, S (LBNL, Berkeley) ; Chiesa, L (LBNL, Berkeley) ; Dietderich, D R (LBNL, Berkeley) ; Ferracin, P (LBNL, Berkeley) ; Goli, M (LBNL, Berkeley) ; Gourlay, S A (LBNL, Berkeley) ; Hannaford, C R (LBNL, Berkeley) ; Higley, H (LBNL, Berkeley) et al.
The Lawrence Berkeley National Laboratory (LBNL) Superconducting Magnet Group has completed the design, fabrication and test of HD1, a 16 T block-coil dipole magnet. State of the art Nb$_3$Sn conductor was wound in double-layer racetrack coils and supported by an iron yoke and a tensioned aluminum shell. [...]
LBNL-57977.- 2004 - 4 p. - Published in : IEEE Trans. Appl. Supercond. 14 (2004) 283-286 External link: Electronic Version from a server
In : 18th International Conference on Magnet Technology, Morioka, Japan, 20 - 24 Oct 2003, pp.283-286
2.
Performance Analysis of HD1: A 16 Tesla Nb$_3$Sn Dipole Magnet / Mattafirri, S (LBNL, Berkeley) ; Bartlett, S E (LBNL, Berkeley) ; Bish, P A (LBNL, Berkeley) ; Caspi, S (LBNL, Berkeley) ; Dietderich, D R (LBNL, Berkeley) ; Ferracin, P (LBNL, Berkeley) ; Gourlay, S A (LBNL, Berkeley) ; Hannaford, C R (LBNL, Berkeley) ; Hafalia, A R (LBNL, Berkeley) ; Lau, W G (LBNL, Berkeley) et al.
The Superconducting Magnet Group at Lawrence Berkeley National Laboratory (LBNL) has been developing technology for high field accelerator magnets from brittle conductors. HD1 is a single bore block dipole magnet using two, double-layer Nb$_3$Sn flat racetrack coils. [...]
2005 - 4 p. - Published in : IEEE Trans. Appl. Supercond. 15 (2005) 1156-1159
In : Applied Superconductivity Conference: Harnessing the Magic, Jacksonville, FL, USA, 3 - 8 Oct 2004, pp.1156-1159
3.
Mechanical Design of HD2, a 15 T Nb$_3$Sn Dipole Magnet with a 35 mm Bore / Ferracin, P (LBL, Berkeley) ; Bartlett, S E (LBL, Berkeley) ; Caspi, S (LBL, Berkeley) ; Dietderich, D R (LBL, Berkeley) ; Gourlay, S A (LBL, Berkeley) ; Hafalia, A R (LBL, Berkeley) ; Hannaford, C R (LBL, Berkeley) ; Lietzke, A F (LBL, Berkeley) ; Mattafirri, S (LBL, Berkeley) ; Mcinturff, A D (LBL, Berkeley) et al.
After the fabrication and test of HD1, a 16 T Nb$_3$Sn dipole magnet based on flat racetrack coil configuration, the Superconducting Magnet Program at Lawrence Berkeley National Laboratory (LBNL) is developing the Nb$_3$Sn dipole HD2. With a dipole field above 15 T, a 35 mm clear bore, and nominal field harmonics within a fraction of one unit, HD2 represents a further step towards the application of block-type coils to high-field accelerator magnets. [...]
2006 - 4 p. - Published in : IEEE Trans. Appl. Supercond. 16 (2006) 378-381
In : 19th International Conference on Magnet Technology, Genoa, Italy, 18 - 23 Sep 2005, pp.378-381
4.
Design of HD2: A 14-Tesla Nb$_3$Sn dipole with a 35-mm bore / Bartlett, S E (LBL, Berkeley) ; Caspi, S (LBL, Berkeley) ; Dietderich, D R (LBL, Berkeley) ; Ferracin, P (LBL, Berkeley) ; Gourlay, S A (LBL, Berkeley) ; Hafalia, A R (LBL, Berkeley) ; Hannaford, C R (LBL, Berkeley) ; Lietzke, A F (LBL, Berkeley) ; Mattafirri, S (LBL, Berkeley) ; McInturff, A D (LBL, Berkeley) et al.
The Nb$_3$Sn dipole HD1, recently fabricated and tested at LBNL, pushes the limits of accelerator magnet technology into the 16 T field range, and opens the way to a new generation of HEP colliders. HD1 is based on a flat racetrack coil configuration and has a 10 mm bore. [...]
LBNL-54891.- 2005 - 4 p. - Published in : IEEE Trans. Appl. Supercond. 15 (2005) 1128-1131 Fulltext: PDF; External link: Electronic Version from a server
In : Applied Superconductivity Conference: Harnessing the Magic, Jacksonville, FL, USA, 3 - 8 Oct 2004, pp.1128-1131
5.
Performance Characteristics of Nb$_3$Sn Block-Coil Dipoles for a 100 TeV Hadron Collider / Sabbi, GianLuca (LBL, Berkeley) ; Bottura, Luca (CERN) ; Cheng, D W (LBL, Berkeley) ; Dietderich, Daniel R (LBL, Berkeley) ; Ferracin, Paolo (CERN) ; Godeke, Arno (LBL, Berkeley) ; Gourlay, StephenA (LBL, Berkeley) ; Marchevsky, Maxim (LBL, Berkeley) ; Todesco, Ezio (CERN) ; Wang, Xiaorong (LBL, Berkeley)
Recent studies highlight a renewed interest in a 100-TeV hadron collider as the next HEP discovery machine. The arc dipoles are the major technology challenge and cost driver for this application. [...]
2015 - 7 p. - Published in : IEEE Trans. Appl. Supercond. 25 (2015) 4001407
In : Applied Superconductivity Conference 2014, Charlotte, NC, USA, 10 - 15 Aug 2014, pp.4001407
6.
Design and Fabrication Experience With Nb$_3$Sn Block-Type Coils for High Field Accelerator Dipoles / Cheng, D W (LBNL, Berkeley) ; Caspi, S (LBNL, Berkeley) ; Dietderich, D R (LBNL, Berkeley) ; Felice, H (LBNL, Berkeley) ; Ferracin, P (CERN) ; Hafalia, A R (LBNL, Berkeley) ; Marchevsky, M (LBNL, Berkeley) ; Prestemon, S (LBNL, Berkeley) ; Sabbi, G (LBNL, Berkeley)
For the last several years, the Lawrence Berkeley National Laboratory has been engaged in the development of Nb$_3$Sn block-type accelerator quality dipoles with operational bore fields in the range of 13-15 T. The magnet design features two coil modules wound around a titanium-alloy pole with a clear aperture of 43 mm. [...]
2013 - 4 p. - Published in : IEEE Trans. Appl. Supercond. 23 (2013) 4002504
In : Applied Superconductivity Conference 2012: The Next Century of Superconductivity, Portland, OR, USA, 7 - 12 Oct 2012, pp.4002504
7.
F2D2: A block-coil short-model dipole toward FCC / Felice, Helene (IRFU, Saclay) ; Calvelli, Valerio (IRFU, Saclay) ; Durante, Maria (IRFU, Saclay) ; Mallon, Philip (IRFU, Saclay) ; Manil, Pierre (IRFU, Saclay) ; Millot, Jean-Francois (IRFU, Saclay) ; Minier, Gilles (IRFU, Saclay) ; Rochepault, Etienne (IRFU, Saclay) ; Bord, Alexandre (U. Lorraine) ; Perraud, Simon (IRFU, Saclay) et al.
In the framework of the Future Circular Collider (FCC) program, and in collaboration with CERN, CEA is developing a 1.5-m-long single aperture Nb$_3$Sn block dipole. The so-called FCC Flared-end Dipole Demonstrator (F2D2) will produce at least 15 T with 14% margin at 1.9 K and will be assembled in a shell-based support structure. [...]
2019 - 7 p. - Published in : IEEE Trans. Appl. Supercond. 29 (2019) 4001807
8.
Test results for HD1, a 16 tesla Nb$_3$Sn dipole magnet / Lietzke, A F (LBL, Berkeley) ; Bartlett, S (LBL, Berkeley) ; Bish, P (LBL, Berkeley) ; Caspi, S (LBL, Berkeley) ; Chiesa, L (LBL, Berkeley) ; Dietderich, D (LBL, Berkeley) ; Ferracin, P (LBL, Berkeley) ; Gourlay, S A (LBL, Berkeley) ; Goli, M (LBL, Berkeley) ; Hafalia, R R (LBL, Berkeley) et al.
The Superconducting Magnet Group at Lawrence Berkeley National Laboratory has been developing the technology for using brittle superconductor in high-field accelerator magnets. HD1, the latest in a series of magnets, contains two, double-layer Nb$_3$Sn flat racetrack coils. [...]
2004 - 4 p. - Published in : IEEE Trans. Appl. Supercond. 14 (2004) 345-348
In : 18th International Conference on Magnet Technology, Morioka, Japan, 20 - 24 Oct 2003, pp.345-348
9.
Test and Analysis of Technology Quadrupole Shell (TQS) Magnet Models for LARP / Caspi, S (LBNL, Berkeley) ; Ambrosio, G (fermilab) ; Andreev, A N (Fermilab) ; Barzi, E (Fermilab) ; Bossert, R (Fermilab) ; Dietderich, D R (LBNL, Berkeley) ; Ferracin, P (LBNL, Berkeley) ; Ghosh, A (Brookhaven Natl. Lab.) ; Hafalia, A R (LBNL, Berkeley) ; Kashikhin, V V (Fermilab) et al.
Test results are reported on four quadrupole magnet model tests (TQS01a, TQS01b, TQS01c, TQS02) in support of the development of a large-aperture Nb$_3$Sn superconducting quadrupole for the US LHC Accelerator Research Program (LARP). All four magnet assemblies used key and bladder technology to compress and support the coils within an iron yoke and an aluminum shell. [...]
2008 - 5 p. - Published in : IEEE Trans. Appl. Supercond. 18 (2008) 179-183
In : 20th International Conference on Magnet Technology, Philadelphia, PA, USA, 27 - 31 Aug 2007, pp.179-183
10.
Fabrication and Test of a 3.7 m Long Support Structure for the LARP ${\hbox{Nb}}_{3}{\hbox{Sn}}$ Quadrupole Magnet LQS01 / Ferracin, P (LBNL, Berkeley) ; Ambrosio, G (Fermilab) ; Anerella, M (Brookhaven Natl. Lab.) ; Bingham, B (LBNL, Berkeley) ; Bossert, R (Fermilab) ; Caspi, S (LBNL, Berkeley) ; Cheng, D W (LBNL, Berkeley) ; Felice, H (LBNL, Berkeley) ; Hafalia, A R (LBNL, Berkeley) ; Hannaford, C R (LBNL, Berkeley) et al.
The 3.7 m long quadrupole magnet LQS01 represents a major step of the US LHC Accelerator Research Program (LARP) towards the development of long Nb$_3$Sn accelerator quadrupole magnets for a LHC Luminosity upgrade. The magnet support structure is a scale up of the 1 m long Technology Quadrupole TQS design with some modifications suggested by TQS model test results. [...]
2009 - 6 p. - Published in : IEEE Trans. Appl. Supercond. 19 (2009) 1106-1111
In : Applied Superconductivity Conference 2008, Chicago, IL, USA, 17 - 22 Aug 2008, pp.1106-1111

No heu trobat el que estaveu cercant? Proveu la vostra cerca a:
recid:2783177 dins Amazon
recid:2783177 dins CERN EDMS
recid:2783177 dins CERN Intranet
recid:2783177 dins CiteSeer
recid:2783177 dins Google Books
recid:2783177 dins Google Scholar
recid:2783177 dins Google Web
recid:2783177 dins IEC
recid:2783177 dins IHS
recid:2783177 dins INSPIRE
recid:2783177 dins ISO
recid:2783177 dins KISS Books/Journals
recid:2783177 dins KISS Preprints
recid:2783177 dins NEBIS
recid:2783177 dins SLAC Library Catalog