|
1.
|
High-Field Design Concept for Second Interaction Region of the Electron-Ion Collider
/ Gamage, Bamunuvita (Jefferson Lab) ; Arbelaez, Diego (LBNL, Berkeley) ; Aschenauer, Elke (Brookhaven) ; Berg, J (Brookhaven) ; Ent, Rolf (Jefferson Lab) ; Ferracin, Paolo (LBNL, Berkeley) ; Morozov, Vasiliy (ORNL, Oak Ridge (main)) ; Rajput-Ghoshal, Renuka (Jefferson Lab) ; Sabbi, GianLuca (LBNL, Berkeley) ; Satogata, Todd (Jefferson Lab) et al.
Efficient realization of the scientific potential of the Electron Ion Collider (EIC) calls for addition of a future second Interaction Region (2nd IR) and a detector in the RHIC IR8 region after the EIC project completion. The second IR and detector are needed to independently cross-check the results of the first detector, and to provide measurements with complementary acceptance. [...]
FERMILAB-CONF-22-989-TD.-
2022 - 3 p.
- Published in : JACoW NAPAC 2022 (2022) WEPA15
Fulltext: Publication - PDF; FERMILAB-CONF-22-989-TD - PDF; External links: JLAB Document Server; Fermilab Library Server
In : 4th North American Particle Accelerator Conference (NAPAC 2022), Albuquerque, NM, United States, 7-12 Aug 2022, pp.WEPA15
|
|
|
2.
|
MQXFA Final Design Report
/ Ambrosio, Giorgio
The MQXFA Quadrupole magnets will be installed in High Luminosity LHC to form the Q1 and Q3 inner triplet optical elements in front of the interaction points 1 (ATLAS) and 5 (CMS) [...]
arXiv:2203.06723 ; FERMILAB-TM-2773-TD ; US-HiLumi-doc-948
-
120 p.
|
|
|
3.
|
Challenges and Lessons Learned From Fabrication, Testing, and Analysis of Eight MQXFA Low Beta Quadrupole Magnets for HL-LHC
/ Ambrosio, Giorgio (Fermilab) ; Amm, Kathleen (Brookhaven) ; Anerella, Michael (Brookhaven) ; Apollinari, Giorgio (Fermilab) ; Izquierdo, Gonzalo Arnau (CERN) ; Baldini, Maria (Fermilab) ; Ballarino, Amalia (CERN) ; Barth, Christian (CERN) ; Yahia, Anis Ben (Brookhaven) ; Blowers, James (Fermilab) et al.
By the end of October 2022, the US HL-LHC Accelerator Upgrade Project (AUP) had completed fabrication of ten MQXFA magnets and tested eight of them. The MQXFA magnets are the low beta quadrupole magnets to be used in the Q1 and Q3 Inner Triplet elements of the High Luminosity LHC. [...]
arXiv:2301.09523; FERMILAB-PUB-22-855-TD.-
2023-08 - 8 p.
- Published in : IEEE Trans. Appl. Supercond. 33 (2023) 4003508
Fulltext: 2301.09523 - PDF; 81b192c337ae5d5acaec37450e135529 - PDF; External link: Fermilab Library Server
|
|
|
4.
|
Cable Design and Development for the High-Temperature Superconductor Cable Test Facility Magnet
/ Pong, Ian (LBNL, Berkeley) ; Hafalia, Aurelio (LBNL, Berkeley) ; Higley, Hugh (LBNL, Berkeley) ; Lee, Elizabeth (LBNL, Berkeley) ; Lin, Andy (LBNL, Berkeley) ; Naus, Michael (LBNL, Berkeley) ; Perez, Carlos (LBNL, Berkeley) ; Prestemon, Soren (LBNL, Berkeley) ; Sabbi, GianLuca (LBNL, Berkeley) ; Hopkins, Simon (CERN) et al.
A large bore “High-Temperature Superconductor Cable Test Facility Magnet” for testing advanced cables and inserts in high transverse field is in its design phase. This magnet will be the core component of a facility for developing conductors and accelerator magnets operating above 15 T, an enabling technology for next-generation fusion devices using magnetic confinement of plasma and for future energy frontier colliders. [...]
2021 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 31 (2021) 1-5
|
|
|
5.
|
Magnetic and Mechanical Analysis of the HQ Model Quadrupole Designs for LARP
/ Felice, Helene (LBNL, Berkeley) ; Caspi, Shlomo (LBNL, Berkeley) ; Ferracin, Paolo (LBNL, Berkeley) ; Kashikhin, Vadim (Fermilab) ; Novitski, Igor (Fermilab) ; Sabbi, GianLuca (LBNL, Berkeley) ; Zlobin, Alexander (Fermilab)
Insertion quadrupoles with large bore and high gradient are required to upgrade the luminosity of the large hadron collider (LHC). The US LHC accelerator research program is developing Nb$_3$Sn technology for the upgrade. [...]
2008 - 4 p.
- Published in : IEEE Trans. Appl. Supercond. 18 (2008) 281-284
In : 20th International Conference on Magnet Technology, Philadelphia, PA, USA, 27 - 31 Aug 2007, pp.281-284
|
|
|
6.
|
|
|
7.
|
Fabrication and test of LARP technological quadrupole models of TQC series
/ Bossert, Rodger C (Fermilab) ; Ambrosio, Giorgio (Fermilab) ; Andreev, Nikolai (Fermilab) ; Barzi, Emanuela (Fermilab) ; Chlachidze, Guram (Fermilab) ; Feher, Sandor (Fermilab) ; Kashikhin, Vladimir S (Fermilab) ; Kashikhin, Vadim V (Fermilab) ; Lamm, Michael (Fermilab) ; Nobrega, Alfred (Fermilab) et al.
In support of the development of a large-aperture Nb$_3$Sn superconducting quadrupole for the Large Hadron Collider (LHC) luminosity upgrade, several two-layer technological quadrupole models of TQC series with 90 mm aperture and collar-based mechanical structure have been developed at Fermilab in collaboration with LBNL. This paper summarizes the results of fabrication and test of TQC02a, the second TQC model based on RRP Nb3Sn strand, and TQC02b, built with both MJR and RRP strand. [...]
FERMILAB-PUB-08-309-TD.-
2009 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 19 (2009) 1226-1230
Fulltext: PDF; External link: Fermilab Library Server (fulltext available)
In : Applied Superconductivity Conference 2008, Chicago, IL, USA, 17 - 22 Aug 2008, pp.1226-1230
|
|
|
8.
|
Magnetic and Mechanical Analysis of a Large Aperture 15 T Cable Test Facility Dipole Magnet
/ Vallone, Giorgio (LBL, Berkeley) ; Arbelaez, Diego (LBL, Berkeley) ; Araujo, Douglas Martins (CERN) ; Ballarino, Amalia (CERN) ; Ferracin, Paolo (LBL, Berkeley) ; Hafalia, Aurelio (LBL, Berkeley) ; Hopkins, Simon (CERN) ; Marinozzi, Vittorio (Fermilab) ; Pong, Ian (LBL, Berkeley) ; Prestemon, Soren (LBL, Berkeley) et al.
The US Department of Energy (DOE) Office of Science (SC), is funding a large bore “Cable Test Facility Magnet” for testing advanced cables and inserts in high transverse field. This is a joint effort between the Office of High Energy Physics (HEP) and the Office of Fusion Energy Sciences (FES). [...]
2021 - 6 p.
- Published in : IEEE Trans. Appl. Supercond. 31 (2021) 9500406
|
|
|
9.
|
Progress on the Upgrade of EDIPO, a 15 T Large Aperture Dipole
/ Araujo, Douglas Martins (CERN) ; Ballarino, Amalia (CERN) ; Bordini, Bernardo (CERN) ; Bottura, Luca (CERN) ; Hopkins, Simon C (CERN) ; Perez, Juan C (CERN) ; Ravaioli, Emmanuele (CERN) ; de Rijk, Gijs (CERN) ; Bruzzone, Pierluigi (Ecole Polytechnique, Lausanne) ; Sarasola, Xabier (Ecole Polytechnique, Lausanne) et al.
The upgraded magnet assembly of the EDIPO test facility aims at generating 15 T at 4.2 K and 85% of short sample limit in a large rectangular aperture and over a uniform field length of 1000 mm. During 2020 the design studies have concentrated on two flared-end block-coil design options with four double-pancake coils, two per pole. [...]
2021 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 31 (2021) 9500205
|
|
|
10.
|
Magnetic Field Measurements of First Pre-series Full-Length 4.2 m Quadrupole MQXFA03 Using PCB Rotating Coils for the Hi-Lumi LHC Project
/ Song, Honghai (Stony Brook U.) ; Ambrosio, Giorgio (Fermilab) ; Amm, Kathleen (Brookhaven) ; Anerella, Michael (Brookhaven) ; Apollinari, Giorgio (Fermilab) ; Cheng, Daniel (LBNL) ; Chlachidze, Guram (Fermilab) ; DiMarco, Joseph (Fermilab) ; Feher, Sandor (Fermilab) ; Ferracin, Paolo (LBNL) et al.
The U.S. Hi-Lumi LHC Accelerator Upgrade Project (AUP) and CERN have joined efforts to develop high field quad-rupoles for the Hi-Lumi LHC upgrade. [...]
FERMILAB-PUB-21-038-TD.-
2021 - 7 p.
- Published in : IEEE Trans. Appl. Supercond. 31 (2021) 4000207
Fulltext: PDF; External link: Fermilab Accepted Manuscript
In : Applied Superconductivity Conference, Online, 24 Oct - 7 Nov 2020, pp.4000207
|
|