Nothing Special   »   [go: up one dir, main page]

CERN Accelerating science

CERN Document Server 找到 64 筆記錄  1 - 10下一個最後  跳到記錄: 檢索需時 0.65 秒. 
1.
Using graph neural networks to reconstruct charged pion showers in the CMS High Granularity Calorimeter / CMS HGCAL Collaboration
A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. [...]
arXiv:2406.11937.- 2024-11-28 - 27 p. - Published in : JINST 19 (2024) P11025 Fulltext: 2406.11937 - PDF; b5503c82fab7782294f84cb336b7e20a - PDF; Fulltext from Publisher: PDF; External link: Fermilab Library Server
2.
Timing Performance of the CMS High Granularity Calorimeter Prototype / CMS HGCAL Collaboration
This paper describes the experience with the calibration, reconstruction and evaluation of the timing capabilities of the CMS HGCAL prototype in the beam tests in 2018. The calibration procedure includes multiple steps and corrections ranging from tens of nanoseconds to a few hundred picoseconds. [...]
arXiv:2312.14622.- 2024-04-11 - 22 p. - Published in : JINST 19 (2024) P04015 Fulltext: PDF; Fulltext from Publisher: PDF;
3.
ROC chips for imaging calorimetry at the International Linear Collider / Callier, S (Orsay ; Orsay, LAL) ; Cizel, J -B (Ecole Polytechnique) ; Dulucq, F (Orsay ; Orsay, LAL) ; Taille, C de La (Orsay ; Orsay, LAL) ; Martin-Chassard, G (Orsay ; Orsay, LAL) ; Seguin-Moreau, N (Orsay ; Orsay, LAL)
Imaging calorimetry at the International Linear Collider requires highly granular and innovative detectors. Technological prototypes have been built and tested under the CALICE collaboration framework and FP6 EUDET, FP7 AIDA European programs. [...]
2014 - 10 p. - Published in : JINST 9 (2014) C02022
In : Topical Workshop on Electronics for Particle Physics, Perugia, Italy, 23 - 27 Sep 2013, pp.C02022
4.
HKROC: an integrated front-end ASIC to readout photomultiplier tubes for the Hyper-Kamiokande experiment / Conforti Di Lorenzo, S (Ec. Polytech., OMEGA) ; Afiri, A (Ecole Polytechnique) ; Bolognesi, S (IRFU, Saclay) ; Bombardi, G (CERN) ; Bouyjou, F (IRFU, Saclay) ; Callier, S (Ec. Polytech., OMEGA) ; De La Taille, C (Ec. Polytech., OMEGA) ; Dinaucourt, P (Ec. Polytech., OMEGA) ; Drapier, O (Ecole Polytechnique) ; Dulucq, F (Ec. Polytech., OMEGA) et al.
The HKROC ASIC was originally designed to readout the photomultiplier tubes (PMTs) for the Hyper-Kamiokande (HK) experiment. HKROC is a very innovative ASIC capable of readout a large number of channels satisfying stringent requirements in terms of noise, speed and dynamic range. [...]
2023 - 7 p. - Published in : JINST 18 (2023) C01035
In : Topical Workshop on Electronics for Particle Physics 2022 (TWEPP 2022), Bergen, Norway, 19 - 23 Sep 2022, pp.C01035
5.
HGCROC2: the front-end readout ASICs for the CMS High Granularity Calorimeter / Bouyjou, F (IRFU, Saclay) ; Bombardi, G (CERN) ; Callier, S (Ec. Polytech., OMEGA) ; Dinaucourt, P (Ec. Polytech., OMEGA) ; Dulucq, F (Ec. Polytech., OMEGA) ; El Berni, M (Ec. Polytech., OMEGA) ; Guilloux, F (IRFU, Saclay) ; Idzik, M (AGH-UST, Cracow) ; de La Taille, C (Ec. Polytech., OMEGA) ; Marchioro, A (CERN) et al.
The CMS High-Granularity Calorimeter (HGCAL) imposes extremely challenging specifications for the front-end electronics: high dynamic range, low noise, high-precision time information and low power consumption, as well as the need to select and transmit trigger information with a high transverse and longitudinal granularity. HGCROC2 is the second prototype of the readout chip embedding almost all the final functionalities. [...]
2022 - 8 p. - Published in : J. Phys. : Conf. Ser. 2374 (2022) 012070 Fulltext: PDF;
In : International Conference on Technology and Instrumentation in Particle Physics (TIPP 2021), Online, Canada, 24 - 29 May 2021, pp.012070
6.
Neutron irradiation and electrical characterisation of the first 8” silicon pad sensor prototypes for the CMS calorimeter endcap upgrade / CMS HGCAL Collaboration
As part of its HL-LHC upgrade program, the CMS collaboration is replacing its existing endcap calorimeters with a high-granularity calorimeter (CE). The new calorimeter is a sampling calorimeter with unprecedented transverse and longitudinal readout for both electromagnetic and hadronic compartments. [...]
arXiv:2209.10159.- 2023-08-24 - 19 p.
- Published in : JINST Fulltext: 33df321261c1de65891ca8b290f4b7a2 - PDF; 2209.10159 - PDF; Fulltext from Publisher: PDF; External link: Fermilab Library Server
7.
Performance of the CMS High Granularity Calorimeter prototype to charged pion beams of 20–300 GeV/c / CALICE Collaboration
The upgrade of the CMS experiment for the high luminosity operation of the LHC comprises the replacement of the current endcap calorimeter by a high granularity sampling calorimeter (HGCAL). The electromagnetic section of the HGCAL is based on silicon sensors interspersed between lead and copper (or copper tungsten) absorbers. [...]
arXiv:2211.04740.- 2023-08-14 - 31 p. - Published in : JINST 18 (2023) P08014 Fulltext: 2211.04740 - PDF; FERMILAB-PUB-23-299-ETD-PPD - PDF; Fulltext from Publisher: PDF; External link: Fermilab Library Server
8.
Design, Construction and Commissioning of a Technological Prototype of a Highly Granular SiPM-on-tile Scintillator-Steel Hadronic Calorimeter / CALICE Collaboration
The CALICE collaboration is developing highly granular electromagnetic and hadronic calorimeters for detectors at future energy frontier electron-positron colliders. After successful tests of a physics prototype, a technological prototype of the Analog Hadron Calorimeter has been built, based on a design and construction techniques scalable to a collider detector. [...]
arXiv:2209.15327; CALICE-PUB-2022-003.- 2023-11-22 - 37 p. - Published in : JINST 18 (2023) P11018 Fulltext: 2209.15327 - PDF; document - PDF;
9.
Response of a CMS HGCAL silicon-pad electromagnetic calorimeter prototype to 20–300 GeV positrons / CMS HGCAL Collaboration
The Compact Muon Solenoid Collaboration is designing a new high-granularity endcap calorimeter, HGCAL, to be installed later this decade. As part of this development work, a prototype system was built, with an electromagnetic section consisting of 14 double-sided structures, providing 28 sampling layers. [...]
arXiv:2111.06855; FERMILAB-PUB-22-427-PPD.- 2022-05-12 - 29 p. - Published in : JINST 17 (2022) P05022 Fulltext: 2111.06855 - PDF; document - PDF; cbd097f03712745131ad048fd9099ac7 - PDF; Fulltext from Publisher: PDF; External link: Fermilab Library Server
10.
HGCROC-Si and HGCROC-SiPM: the front-end readout ASICs for the CMS HGCAL / Bombardi, G (CERN) ; Marchioro, A (CERN) ; Vergine, T (CERN) ; Bouyjou, F (IRFU, Saclay) ; Guilloux, F (IRFU, Saclay) ; Callier, S (Ec. Polytech., OMEGA) ; Dulucq, F (Ec. Polytech., OMEGA) ; El Berni, M (Ec. Polytech., OMEGA) ; de La Taille, C (Ec. Polytech., OMEGA) ; Raux, L (Ec. Polytech., OMEGA) et al.
The two variants of HGCROC are the ASICs designed to readout the more than 6 million channels of the future HGCAL of CMS, which will consist of hexagonal silicon sensors for a large part but also SiPM-on-scintillators tiles. The SiPM version of the chip was made from the silicon version by adapting only the first amplifier stage. [...]
2020 - 4 p. - Published in : 10.1109/NSS/MIC42677.2020.9508012
In : 2020 IEEE Nuclear Science Symposium (NSS) and Medical Imaging Conference (MIC), Boston, United States, 31 Oct - 7 Nov 2020

CERN Document Server : 找到 64 筆記錄   1 - 10下一個最後  跳到記錄:
參見:相似的作者
20 Dulucq, F
10 Dulucq, Frederic
10 Dulucq, Fréderic
10 Dulucq, Frédéric
您想得到有關這檢索條件的最新結果嗎?
建立您的 電郵警報 或訂閱 RSS feed.
沒有尋找到什麼? 嘗試在以下的服務器查尋:
Dulucq, F. 在 Amazon
Dulucq, F. 在 CERN EDMS
Dulucq, F. 在 CERN Intranet
Dulucq, F. 在 CiteSeer
Dulucq, F. 在 Google Books
Dulucq, F. 在 Google Scholar
Dulucq, F. 在 Google Web
Dulucq, F. 在 IEC
Dulucq, F. 在 IHS
Dulucq, F. 在 INSPIRE
Dulucq, F. 在 ISO
Dulucq, F. 在 KISS Books/Journals
Dulucq, F. 在 KISS Preprints
Dulucq, F. 在 NEBIS
Dulucq, F. 在 SLAC Library Catalog
Dulucq, F. 在 Scirus