CERN Accelerating science

Book
Report number	arXiv:1306.6328 ; ANL-HEP-TR-13-20 ; BNL-100603-2013-IR ; IRFU-13-59 ; Cockcroft-13-10 ; CERN-ATS-2013-037 ; CLNS-13-2085 ; DESY-13-062 ; FERMILAB-TM-2554 ; IHEP-AC-ILC-2013-001 ; ILC-REPORT-2013-040 ; INFN-13-04-LNF ; JAI-2013-001 ; JINR-E9-2013-35 ; JLAB-R-2013-01 ; KEK-Report-2013-1 ; KNU-CHEP-ILC-2013-1 ; LLNL-TR-635539 ; SLAC-R-1004 ; ILC-HiGrade-Report-2013-003
Title	The International Linear Collider Technical Design Report
Volume	v.3.II : accelerator baseline design
Author(s)	Adolphsen, Chris (ed.) (SLAC) ; Barone, Maura (ed.) (Fermilab) ; Barish, Barry (ed.) (Caltech) ; Buesser, Karsten (ed.) (DESY) ; Burrows, Philip (ed.) (Oxford U.) ; Carwardine, John (ed.) (Argonne) ; Clark, Jeffrey (ed.) (Fermilab) ; Durand, Helene Mainaud (ed.) (CERN) ; Dugan, Gerry (ed.) (Cornell U.) ; Elsen, Eckhard (ed.) (DESY) ; Enomoto, Atsushi (ed.) (KEK, Tsukuba) ; Foster, Brian (ed.) (DESY) ; Fukuda, Shigeki (ed.) (KEK, Tsukuba) ; Gai, Wei (ed.) (Argonne) ; Gastal, Martin (ed.) (CERN) ; Geng, Rongli (ed.) (Jefferson Lab) ; Ginsburg, Camille (ed.) (Fermilab) ; Guiducci, Susanna (ed.) (Frascati) ; Harrison, Mike (ed.) (Brookhaven) ; Hayano, Hitoshi (ed.) (KEK, Tsukuba) ; Kershaw, Keith (ed.) (CERN) ; Kubo, Kiyoshi (ed.) (KEK, Tsukuba) ; Kuchler, Victor (ed.) (Fermilab) ; List, Benno (ed.) (DESY) ; Liu, Wanming (ed.) (Argonne) ; Michizono, Shinichiro (ed.) (KEK, Tsukuba) ; Nantista, Christopher (ed.) (SLAC) ; Osborne, John (ed.) (CERN) ; Palmer, Mark (ed.) (Fermilab) ; Paterson, James McEwan (ed.) (SLAC) ; Peterson, Thomas (ed.) (Fermilab) ; Phinney, Nan (ed.) (SLAC) ; Pierini, Paolo (LASA, Segrate) ; Ross, Marc (ed.) (SLAC) ; Rubin, David (ed.) (Cornell U.) ; Seryi, Andrei (ed.) (Oxford U.) ; Sheppard, John (ed.) (SLAC) ; Solyak, Nikolay (ed.) (Fermilab) ; Stapnes, Steinar (ed.) (CERN) ; Tauchi, Toshiaki (ed.) (KEK, Tsukuba) ; Toge, Nobu (ed.) (KEK, Tsukuba) ; Walker, Nicholas (ed.) (DESY) ; Yamamoto, Akira (ed.) (KEK, Tsukuba) ; Yokoya, Kaoru (ed.) (KEK, Tsukuba)
Publication	Geneva : CERN, 2013 - 339.
Note	Comments: See also http://www.linearcollider.org/ILC/TDR . The full list of signatories is inside the Report
Subject code	681.384
Subject category	Accelerators and Storage Rings
Accelerator/Facility, Experiment	CERN ILC
Abstract	The International Linear Collider Technical Design Report (TDR) describes in four volumes the physics case and the design of a 500 GeV centre-of-mass energy linear electron-positron collider based on superconducting radio-frequency technology using Niobium cavities as the accelerating structures. The accelerator can be extended to 1 TeV and also run as a Higgs factory at around 250 GeV and on the Z0 pole. A comprehensive value estimate of the accelerator is give, together with associated uncertainties. It is shown that no significant technical issues remain to be solved. Once a site is selected and the necessary site-dependent engineering is carried out, construction can begin immediately. The TDR also gives baseline documentation for two high-performance detectors that can share the ILC luminosity by being moved into and out of the beam line in a "push-pull" configuration. These detectors, ILD and SiD, are described in detail. They form the basis for a world-class experimental programme that promises to increase significantly our understanding of the fundamental processes that govern the evolution of the Universe.
ISBN	9783935702775 (print version, paperback)

Corresponding record in: Inspire
Email contact: alexia.augier@cern.ch