Nothing Special   »   [go: up one dir, main page]

MechDefense TacOps 1 Charging Handle

Below is a video of the only AR-15 M4  Ambidextrous Tactical Charging Handle I will utilize going forward on all of my AR RIFLES. The MechDefense TacOps 1 Charging Handle is built for battle.

  • Ambidextrous
  • Oversized roll pin
  • No gritty feeling
  • Superior strength
  • Designed places little or pressure on the roll pin

Visit MechArmor Defense

 

 

MechDefense TacOps 1 Charging Handle

AR-15|M4|M16 PARA-TROOPER FOLDING CHARGING HANDLE

Here’s a new product from Brownells, it’s a para-trooper style folding handle for the AR-15 and M4. Looks pretty interesting. It’s labeled as their own product, who knows. Priced a little to steep for my wallet. If anyone out their has one or gets one I would appreciate some feedback,review and some pictures.

Thanks

Drew

 

AR-15 M4 M16 PARA-TROOPER FOLDING CHARGING HANDLE

AR-15 M4 M16 PARA-TROOPER FOLDING CHARGING HANDLE

Tactical charging handle has an oversized lever on the left side that folds against the receiver to present a slim, no-snag profile during carry or storage. Opens instantly to give you a larger grasping surface than the standard-issue handle, so you can find it and cycle it faster. Deeply serrated front face ensures non-slip hand contact for positive operation on the first attempt in all conditions. Lever angles down slightly when retracted, so it won’t interfere with a scope or sight mounted on the receiver rail. Drop-in ready for a mil-spec AR-15/M16 upper receiver; no gunsmithing required. Machined from billet 7075 T6 aluminum—the same material USGI receivers are made from—for superb strength and reliability. Hardcoat anodized to resist corrosion and surface wear; matte black finish matches most factory receiver finishes.

AR-15/M16 PARA-TROOPER CHARGING HANDLE

AR-15/M16 PARA-TROOPER CHARGING HANDLE

AR-15/M16 PARA-TROOPER CHARGING HANDLE

AR-15/M16 PARA-TROOPER CHARGING HANDLE

Folds Against Receiver For Storage, Operates As Quickly A Standard Handle

Tactical charging handle has folding lever on the left side that hugs the receiver and presents a slim, non-snag silhouette during carry or storage. Opens instantly to cycle the action as quickly as a standard-issue handle. Deeply serrated front face ensures non-slip hand contact for positive operation on the first attempt in all weather conditions. Lever angles down slightly when retracted, so it won’t interfere with a scope or sight mounted on the receiver rail. Drop in ready for standard, mil-spec AR-15/M16 upper receiver; no fitting or gunsmithing required. Precision machined from billet 7075 T6 aluminum—the same material USGI receivers are made from—for superb strength and reliability. Hardcoat anodized to resist corrosion and surface wear; matte black finish matches most factory receiver finishes.