Cove molding

uDecor CM-1209 Crown Molding has a cove style that matches well with a plank ceiling. With many ceilings going for the planked look, try a crown molding with a simple design such as a cove shape with little to no detail. Cove moldings also work well with minimalist designs. #crownmolding #covemolding

Cove Molding

We sighed a deep breath of satisfaction when we finished the board and batten in our downstairs powder room. It was our first attempt at building board and batten. Now, understand, this is the only bathroom on the main level so it gets used a lot. How do I delicately communicate this? When someone spends ... Read More about Board and Batten Bathroom Update- Part 1

The 2012 WindsorONE catalog is out, and a key update is a page comparing the 4 molding styles (Classical Colonial, Greek Revival, Classical Craftsman & Colonial Revival) side by side. Visit the WindsorONE website to learn more about the Classic American Molding Collection and download your own copy of the reference sheet: www.windsorone.com/moldings_landing.php

How to cut internal mitres using a cove mitre Shop for Cove Mitres To accurately cut mitres for the corners of your coving and fit them to the room you will need a few other tools apart from your cove mitre. Other tools needed The other tools you will need are a pencil, tape measure, […]

Today, we're excited to share our updated office walls. As a reminder, we're turning the 5th bedroom in our basement into a home office/studio spa ...

How I created DIY Faux Crown Molding/ceiling trim without the fuss.

We sighed a deep breath of satisfaction when we finished the board and batten in our downstairs powder room. It was our first attempt at building board and batten. Now, understand, this is the only bathroom on the main level so it gets used a lot. How do I delicately communicate this? When someone spends ... Read More about Board and Batten Bathroom Update- Part 1

board and batten supplies: 1″ x 6″ (Don’t use baseboards with a fancy top, just a plain ol’ board will do.) Top Board: Same as above, 1″ x 6″ Vertical Battens: 1″ x 4″ Ledge: 1″ x 2″ Cove Molding: 3/4″ x 3/4″ Quarter Round: 3/4″ x 3/4″