Nuclear reprocessing

Nuclear reprocessing is the chemical separation of fission products and actinides from spent nuclear fuel.^[1] Originally, reprocessing was used solely to extract plutonium for producing nuclear weapons. With commercialization of nuclear power, the reprocessed plutonium was recycled back into MOX nuclear fuel for thermal reactors.^[2] The reprocessed uranium, also known as the spent fuel material, can in principle also be re-used as fuel, but that is only economical when uranium supply is low and prices are high. Nuclear reprocessing may extend beyond fuel and include the reprocessing of other nuclear reactor material, such as Zircaloy cladding.

The high radioactivity of spent nuclear material means that reprocessing must be highly controlled and carefully executed in advanced facilities by specialized personnel. Numerous processes exist, with the chemical based PUREX process dominating. Alternatives include heating to drive off volatile elements, burning via oxidation, and fluoride volatility (which uses extremely reactive Fluorine). Each process results in some form of refined nuclear product, with radioactive waste as a byproduct. Because this could allow for weapons grade nuclear material, nuclear reprocessing is a concern for nuclear proliferation and is thus tightly regulated.

Relatively high cost is associated with spent fuel reprocessing compared to the once-through fuel cycle, but fuel use can be increased and waste volumes decreased.^[3] Nuclear fuel reprocessing is performed routinely in Europe, Russia, and Japan. In the United States, the Obama administration stepped back from President Bush's plans for commercial-scale reprocessing and reverted to a program focused on reprocessing-related scientific research.^[4] Not all nuclear fuel requires reprocessing; a breeder reactor is not restricted to using recycled plutonium and uranium. It can employ all the actinides, closing the nuclear fuel cycle and potentially multiplying the energy extracted from natural uranium by about 60 times.^[5]^[6]

Remove ads

The potentially useful components dealt with in nuclear reprocessing comprise specific actinides (plutonium, uranium, and some minor actinides). The lighter elements components include fission products, activation products, and cladding.

More information material, disposition ...

material	disposition
plutonium, minor actinides, reprocessed uranium	fission in fast, fusion fission hybrid, or subcritical reactor or use as MOX fuel
reprocessed uranium, filters	less stringent storage as intermediate-level waste
long-lived fission and activation products	nuclear transmutation or geological repository
medium-lived fission products ¹³⁷Cs and ⁹⁰Sr	medium-term storage as high-level waste; decay heat could be used to drive a Stirling engine
useful radionuclides, rare earths (lanthanides), and noble metals	industrial and medical uses
cladding, fission product zirconium	re-use for zircalloy cladding or storage as intermediate level waste

Close

Remove ads

The first large-scale nuclear reactors were built during World War II. These reactors were designed for the production of plutonium for use in nuclear weapons. The only reprocessing required, therefore, was the extraction of the plutonium (free of fission-product contamination) from the spent natural uranium fuel. In 1943, several methods were proposed for separating the relatively small quantity of plutonium from the uranium and fission products. The first method selected, a precipitation process called the bismuth phosphate process, was developed and tested at the Oak Ridge National Laboratory (ORNL) between 1943 and 1945 to produce quantities of plutonium for evaluation and use in the US weapons programs. ORNL produced the first macroscopic quantities (grams) of separated plutonium with these processes.

The bismuth phosphate process was first operated on a large scale at the Hanford Site, in the later part of 1944. It was successful for plutonium separation in the emergency situation existing then, but it had a significant weakness: the inability to recover uranium.

The first successful solvent extraction process for the recovery of pure uranium and plutonium was developed at ORNL in 1949.^[7] The PUREX process is the current method of extraction. Separation plants were also constructed at Savannah River Site and a smaller plant at West Valley Reprocessing Plant which closed by 1972 because of its inability to meet new regulatory requirements.^[8]

Reprocessing of civilian fuel has long been employed at the COGEMA La Hague site in France, the Sellafield site in the United Kingdom, the Mayak Chemical Combine in Russia, and at sites such as the Tokai plant in Japan, the Tarapur plant in India, and briefly at the West Valley Reprocessing Plant in the United States.

In October 1976,^[9] concern of nuclear weapons proliferation (especially after India demonstrated nuclear weapons capabilities using reprocessing technology) led President Gerald Ford to issue a Presidential directive to indefinitely suspend the commercial reprocessing and recycling of plutonium in the U.S. On 7 April 1977, President Jimmy Carter banned the reprocessing of commercial reactor spent nuclear fuel. The key issue driving this policy was the risk of nuclear weapons proliferation by diversion of plutonium from the civilian fuel cycle, and to encourage other nations to follow the US lead.^[10]^[11]^[12] After that, only countries that already had large investments in reprocessing infrastructure continued to reprocess spent nuclear fuel. President Reagan lifted the ban in 1981, but did not provide the substantial subsidy that would have been necessary to start up commercial reprocessing.^[13]

In March 1999, the U.S. Department of Energy (DOE) reversed its policy and signed a contract with a consortium of Duke Energy, COGEMA, and Stone & Webster (DCS) to design and operate a mixed oxide (MOX) fuel fabrication facility. Site preparation at the Savannah River Site (South Carolina) began in October 2005.^[14] In 2011 the New York Times reported "...11 years after the government awarded a construction contract, the cost of the project has soared to nearly $5 billion. The vast concrete and steel structure is a half-finished hulk, and the government has yet to find a single customer, despite offers of lucrative subsidies." TVA (currently the most likely customer) said in April 2011 that it would delay a decision until it could see how MOX fuel performed in the nuclear accident at Fukushima Daiichi.^[15]

Remove ads

Water and organic solvents

PUREX

PUREX, the current standard method, is an acronym standing for Plutonium and Uranium Recovery by EXtraction. The PUREX process is a liquid-liquid extraction method used to reprocess spent nuclear fuel, to extract uranium and plutonium, independent of each other, from the fission products. This is the most developed and widely used process in the industry at present.

When used on fuel from commercial power reactors the plutonium extracted typically contains too much Pu-240 to be considered "weapons-grade" plutonium, ideal for use in a nuclear weapon. Nevertheless, highly reliable nuclear weapons can be built at all levels of technical sophistication using reactor-grade plutonium.^[16] Moreover, reactors that are capable of refueling frequently can be used to produce weapon-grade plutonium, which can later be recovered using PUREX. Because of this, PUREX chemicals are monitored.^[17]

Modifications of PUREX

UREX

The PUREX process can be modified to make a UREX (URanium EXtraction) process which could be used to save space inside high level nuclear waste disposal sites, such as the Yucca Mountain nuclear waste repository, by removing the uranium which makes up the vast majority of the mass and volume of used fuel and recycling it as reprocessed uranium.

The UREX process is a PUREX process which has been modified to prevent the plutonium from being extracted. This can be done by adding a plutonium reductant before the first metal extraction step. In the UREX process, ~99.9% of the uranium and >95% of technetium are separated from each other and the other fission products and actinides. The key is the addition of acetohydroxamic acid (AHA) to the extraction and scrub sections of the process. The addition of AHA greatly diminishes the extractability of plutonium and neptunium, providing somewhat greater proliferation resistance than with the plutonium extraction stage of the PUREX process.^{[citation needed]}

TRUEX

Adding a second extraction agent, octyl(phenyl)-N, N-dibutyl carbamoylmethyl phosphine oxide (CMPO) in combination with tributylphosphate, (TBP), the PUREX process can be turned into the TRUEX (TRansUranic EXtraction) process. TRUEX was invented in the US by Argonne National Laboratory and is designed to remove the transuranic metals (Am/Cm) from waste. The idea is that by lowering the alpha activity of the waste, the majority of the waste can then be disposed of with greater ease. In common with PUREX this process operates by a solvation mechanism.

DIAMEX

As an alternative to TRUEX, an extraction process using a malondiamide has been devised. The DIAMEX (DIAMide EXtraction) process has the advantage of avoiding the formation of organic waste which contains elements other than carbon, hydrogen, nitrogen, and oxygen. Such an organic waste can be burned without the formation of acidic gases which could contribute to acid rain (although the acidic gases could be recovered by a scrubber). The DIAMEX process is being worked on in Europe by the French CEA. The process is sufficiently mature that an industrial plant could be constructed with the existing knowledge of the process.^[18] In common with PUREX this process operates by a solvation mechanism.

SANEX

Selective ActiNide EXtraction. As part of the management of minor actinides it has been proposed that the lanthanides and trivalent minor actinides should be removed from the PUREX raffinate by a process such as DIAMEX or TRUEX. To allow the actinides such as americium to be either reused in industrial sources or used as fuel, the lanthanides must be removed. The lanthanides have large neutron cross sections and hence they would poison a neutron driven nuclear reaction. To date the extraction system for the SANEX process has not been defined, but currently several different research groups are working towards a process. For instance the French CEA is working on a bis-triazinyl pyridine (BTP) based process.^[19]^[20]^[21] Other systems such as the dithiophosphinic acids are being worked on by some other workers.

UNEX

The UNiversal EXtraction process was developed in Russia and the Czech Republic; it is designed to completely remove the most troublesome radioisotopes (Sr, Cs and minor actinides) from the raffinate remaining after the extraction of uranium and plutonium from used nuclear fuel.^[22]^[23] The chemistry is based upon the interaction of caesium and strontium with polyethylene glycol^[24]^[25] and a cobalt carborane anion (known as chlorinated cobalt dicarbollide). The actinides are extracted by CMPO, and the diluent is a polar aromatic such as nitrobenzene. Other diluents such as meta-nitrobenzotrifluoride^[26] and phenyl trifluoromethyl sulfone^[27] have been suggested as well.

Electrochemical and ion exchange methods

An exotic method using electrochemistry and ion exchange in ammonium carbonate has been reported.^[28] Other methods for the extraction of uranium using ion exchange in alkaline carbonate and "fumed" lead oxide have also been reported.^[29]

Obsolete methods

Bismuth phosphate

The bismuth phosphate process is an obsolete process that adds significant unnecessary material to the final radioactive waste. The bismuth phosphate process has been replaced by solvent extraction processes. The bismuth phosphate process was designed to extract plutonium from aluminium-clad nuclear fuel rods, containing uranium. The fuel was decladded by boiling it in caustic soda. After decladding, the uranium metal was dissolved in nitric acid.

The plutonium at this point is in the +4 oxidation state. It was then precipitated out of the solution by the addition of bismuth nitrate and phosphoric acid to form the bismuth phosphate. The plutonium was coprecipitated with this. The supernatant liquid (containing many of the fission products) was separated from the solid. The precipitate was then dissolved in nitric acid before the addition of an oxidant (such as potassium permanganate) to produce PuO₂²⁺. The plutonium was maintained in the +6 oxidation state by addition of a dichromate salt.

The bismuth phosphate was next re-precipitated, leaving the plutonium in solution, and an iron(II) salt (such as ferrous sulfate) was added. The plutonium was again re-precipitated using a bismuth phosphate carrier and a combination of lanthanum salts and fluoride added, forming a solid lanthanum fluoride carrier for the plutonium. Addition of an alkali produced an oxide. The combined lanthanum plutonium oxide was collected and extracted with nitric acid to form plutonium nitrate.^[30]

Hexone or REDOX

This is a liquid-liquid extraction process which uses methyl isobutyl ketone codenamed hexone as the extractant. The extraction is by a solvation mechanism. This process has the disadvantage of requiring the use of a salting-out reagent (aluminium nitrate) to increase the nitrate concentration in the aqueous phase to obtain a reasonable distribution ratio (D value). Also, hexone is degraded by concentrated nitric acid. This process was used in 1952-1956 on the Hanford plant T and has been replaced by the PUREX process.^[31]^[32]

Pu⁴⁺ + 4NO−3 + 2S → [Pu(NO₃)₄S₂]

Butex, β,β'-dibutyoxydiethyl ether

A process based on a solvation extraction process using the triether extractant named above. This process has the disadvantage of requiring the use of a salting-out reagent (aluminium nitrate) to increase the nitrate concentration in the aqueous phase to obtain a reasonable distribution ratio. This process was used at Windscale in 1951-1964. This process has been replaced by PUREX, which was shown to be a superior technology for larger scale reprocessing.^[33]

Sodium acetate

The sodium uranyl acetate process was used by the early Soviet nuclear industry to recover plutonium from irradiated fuel.^[34] It was never used in the West; the idea is to dissolve the fuel in nitric acid, alter the oxidation state of the plutonium, and then add acetic acid and base. This would convert the uranium and plutonium into a solid acetate salt.

Explosion of the crystallized acetates-nitrates in a non-cooled waste tank caused the Kyshtym disaster in 1957.

Remove ads

As there are some downsides to the PUREX process, there have been efforts to develop alternatives to the process, some of them compatible with PUREX (i.e. the residue from one process could be used as feedstock for the other) and others wholly incompatible. None of these have (as of the 2020s) reached widespread commercial use, but some have seen large scale tests or firm commitments towards their future larger scale implementation.^[35]

Pyroprocessing

Pyroprocessing is a generic term for high-temperature methods. Solvents are molten salts (e.g. LiCl + KCl or LiF + CaF₂) and molten metals (e.g. cadmium, bismuth, magnesium) rather than water and organic compounds. Electrorefining, distillation, and solvent-solvent extraction are common steps.

These processes are not currently in significant use worldwide, but they have been pioneered at Argonne National Laboratory^[38]^[39] with current research also taking place at CRIEPI in Japan, the Nuclear Research Institute of Řež in Czech Republic, Indira Gandhi Centre for Atomic Research in India and KAERI in South Korea.^[40]^[41]^[42]^[43]

Advantages of pyroprocessing

The principles behind it are well understood, and no significant technical barriers exist to their adoption.^[44]
Readily applied to high-burnup spent fuel and requires little cooling time, since the operating temperatures are high already.
Does not use solvents containing hydrogen and carbon, which are neutron moderators creating risk of criticality accidents and can absorb the fission product tritium and the activation product carbon-14 in dilute solutions that cannot be separated later.
- Alternatively, voloxidation^[45] (see below) can remove 99% of the tritium from used fuel and recover it in the form of a strong solution suitable for use as a supply of tritium.
More compact than aqueous methods, allowing on-site reprocessing at the reactor site, which avoids transportation of spent fuel and its security issues, instead storing a much smaller volume of fission products on site as high-level waste until decommissioning. For example, the Integral Fast Reactor and Molten Salt Reactor fuel cycles are based on on-site pyroprocessing.
It can separate many or even all actinides at once and produce highly radioactive fuel which is harder to manipulate for theft or making nuclear weapons. (However, the difficulty has been questioned.^[46]) In contrast the PUREX process was designed to separate plutonium only for weapons, and it also leaves the minor actinides (americium and curium) behind, producing waste with more long-lived radioactivity.
Most of the radioactivity in roughly 10² to 10⁵ years after the use of the nuclear fuel is produced by the actinides, since there are no fission products with half-lives in this range. These actinides can fuel fast reactors, so extracting and reusing (fissioning) them increases energy production per kg of fuel, as well as reducing the long-term radioactivity of the wastes.
Fluoride volatility (see below) produces salts that can readily be used in molten salt reprocessing such as pyroprocessing
The ability to process "fresh" spent fuel reduces the needs for spent fuel pools (even if the recovered short lived radionuclides are "only" sent to storage, that still requires less space as the bulk of the mass, uranium, can be stored separately from them). Uranium – even higher specific activity reprocessed uranium – does not need cooling for safe storage.
Short lived radionuclides can be recovered from "fresh" spent fuel allowing either their direct use in industry science or medicine or the recovery of their decay products without contamination by other isotopes (for example: ruthenium in spent fuel decays to rhodium all isotopes of which other than ¹⁰³
Rh further decay to stable isotopes of palladium. Palladium derived from the decay of fission ruthenium and rhodium will be nonradioactive, but fission Palladium contains significant contamination with long-lived ¹⁰⁷
Pd. Ruthenium-107 and rhodium-107 both have half lives on the order of minutes and decay to palladium-107 before reprocessing under most circumstances)
Possible fuels for radioisotope thermoelectric generators (RTGs) that are mostly decayed in spent fuel, that has significantly aged, can be recovered in sufficient quantities to make their use worthwhile. Examples include materials with half lives around two years such as ¹³⁴
Cs, ¹²⁵
Sb, ¹⁴⁷
Pm. While those would perhaps not be suitable for lengthy space missions, they can be used to replace diesel generators in off-grid locations where refueling is possible once a year.^[a] Antimony would be particularly interesting because it forms a stable alloy with lead and can thus be transformed relatively easily into a partially self-shielding and chemically inert form. Shorter lived RTG fuels present the further benefit of reducing the risk of orphan sources as the activity will decline relatively quickly if no refueling is undertaken.

Disadvantages of pyroprocessing

Reprocessing as a whole is not currently (2005) in favor, and places that do reprocess already have PUREX plants constructed. Consequently, there is little demand for new pyrometallurgical systems, although there could be if the Generation IV reactor programs become reality.
The used salt from pyroprocessing is less suitable for conversion into glass than the waste materials produced by the PUREX process.
If the goal is to reduce the longevity of spent nuclear fuel in burner reactors, then better recovery rates of the minor actinides need to be achieved.
Working with "fresh" spent fuel requires more shielding and better ways to deal with heat production than working with "aged" spent fuel does. If the facilities are built in such a way as to require high specific activity material, they cannot handle older "legacy waste" except blended with fresh spent fuel

Electrolysis

The electrolysis methods are based on the difference in the standard potentials of uranium, plutonium and minor actinides in a molten salt. The standard potential of uranium is the lowest, therefore when a potential is applied, the uranium will be reduced at the cathode out of the molten salt solution before the other elements.^[47]

PYRO-A and -B for IFR

These processes were developed by Argonne National Laboratory and used in the Integral Fast Reactor project.

PYRO-A is a means of separating actinides (elements within the actinide family, generally heavier than U-235) from non-actinides. The spent fuel is placed in an anode basket which is immersed in a molten salt electrolyte. An electric current is applied, causing the uranium metal (or sometimes oxide, depending on the spent fuel) to plate out on a solid metal cathode while the other actinides (and the rare earths) can be absorbed into a liquid cadmium cathode. Many of the fission products (such as caesium, zirconium and strontium) remain in the salt.^[48]^[49]^[50] As alternatives to the molten cadmium electrode it is possible to use a molten bismuth cathode, or a solid aluminium cathode.^[51]

As an alternative to electrowinning, the wanted metal can be isolated by using a molten alloy of an electropositive metal and a less reactive metal.^[52]

Since the majority of the long term radioactivity, and volume, of spent fuel comes from actinides, removing the actinides produces waste that is more compact, and not nearly as dangerous over the long term. The radioactivity of this waste will then drop to the level of various naturally occurring minerals and ores within a few hundred, rather than thousands of, years.^[53]

The mixed actinides produced by pyrometallic processing can be used again as nuclear fuel, as they are virtually all either fissile, or fertile, though many of these materials would require a fast breeder reactor to be burned efficiently. In a thermal neutron spectrum, the concentrations of several heavy actinides (curium-242 and plutonium-240) can become quite high, creating fuel that is substantially different from the usual uranium or mixed uranium-plutonium oxides (MOX) that most current reactors were designed to use.

Another pyrochemical process, the PYRO-B process, has been developed for the processing and recycling of fuel from a transmuter reactor ( a fast breeder reactor designed to convert transuranic nuclear waste into fission products ). A typical transmuter fuel is free from uranium and contains recovered transuranics in an inert matrix such as metallic zirconium. In the PYRO-B processing of such fuel, an electrorefining step is used to separate the residual transuranic elements from the fission products and recycle the transuranics to the reactor for fissioning. Newly generated technetium and iodine are extracted for incorporation into transmutation targets, and the other fission products are sent to waste.

Voloxidation

Voloxidation (for volumetric oxidation) involves heating oxide fuel with oxygen, sometimes with alternating oxidation and reduction, or alternating oxidation by ozone to uranium trioxide with decomposition by heating back to triuranium octoxide.^[45] A major purpose is to capture tritium as tritiated water vapor before further processing where it would be difficult to retain the tritium. Tritium is a difficult contaminant to remove from aqueous solution, as it cannot be separated from water except by isotope separation. However, tritium is also a valuable product used in industry science and nuclear weapons, so recovery of a stream of hydrogen or water with a high tritium content can make targeted recovery economically worthwhile. Other volatile elements leave the fuel and must be recovered, especially iodine, technetium, and carbon-14. Voloxidation also breaks up the fuel or increases its surface area to enhance penetration of reagents in following reprocessing steps.

Advantages

The process is simple and requires no complex machinery or chemicals above and beyond that required in all reprocessing (hot cells, remote handling equipment)
Products such as krypton-85 or tritium, as well as xenon (whose isotope are either stable, very nearly stable, or quickly decay), can be recovered and sold for use in industry, science or medicine
Driving off volatile fission products allows for safer storage in interim storage or deep geological repository
Nuclear proliferation risks are low as no separation of plutonium occurs
Radioactive material is not chemically mobilized beyond what should be accounted for in long-term storage anyway. Substances that are inert as native elements or oxides remain so
The product can be used as fuel in a CANDU reactor or even downblended with similarly treated spent CANDU fuel if too much fissile material is left in the spent fuel.
The resulting product can be further processed by any of the other processes mentioned above and below. Removal of volatile fission products means that transportation becomes slightly easier compared to spent fuel with damaged or removed cladding
All volatile products of concern (while helium will be present in the spent fuel, there won't be any radioactive isotopes of helium) can in principle be recovered in a cold trap cooled by liquid nitrogen (temperature: 77 K (−196.2 °C; −321.1 °F) or lower). However, this requires significant amounts of cooling to counteract the effect of decay heat from radioactive volatiles like krypton-85. Tritium will be present in the form of tritiated water, which is a solid at the temperature of liquid nitrogen.
Technetium heptoxide can be removed as a gas by heating above its boiling point of 392.6 K (119.5 °C; 247.0 °F) which reduces the issues presented by Technetium contamination in processes like fluoride volatility or PUREX; ruthenium tetroxide (gaseous above 313.1 K (40.0 °C; 103.9 °F)) can likewise be removed from the spent fuel and recovered for sale or disposal

Disadvantages

Further processing is needed if the resulting product is to be used for re-enrichment or fabrication of MOX-fuel
If volatile fission products escape to the environment this presents a radiation hazard, mostly due to ¹²⁹
I, Tritium and ⁸⁵
Kr. Their safe recovery and storage requires further equipment.
An oxidizing agent / reducing agent has to be used for reduction/oxidation steps whose recovery can be difficult, energy consuming or both

Volatilization in isolation

Simply heating spent oxide fuel in an inert atmosphere or vacuum at a temperature between 700 °C (1,292 °F) and 1,000 °C (1,830 °F) as a first reprocessing step can remove several volatile elements, including caesium whose isotope caesium-137 emits about half of the heat produced by the spent fuel over the following 100 years of cooling (however, most of the other half is from strontium-90, which has a similar half-life). The estimated overall mass balance for 20,000 g of processed fuel with 2,000 g of cladding is:^[54]

More information Input, Residue ...

	Input	Residue	Zeolite filter	Carbon filter	Particle filters
Palladium	28	14	14
Tellurium	10	5	5
Molybdenum	70		70
Caesium	46		46
Rubidium	8		8
Silver	2		2
Iodine	4			4
Cladding	2000	2000
Uranium	19218	19218			?
Others	614	614			?
Total	22000	21851	145	4	0

Close

Advantages

Requires no chemical processes at all
Can in theory be done "self heating" via the decay heat of sufficiently "fresh" spent fuel
Caesium-137 has uses in food irradiation and can be used to power radioisotope thermoelectric generators. However, its contamination with stable ¹³³
Cs and long lived ¹³⁵
Cs reduces efficiency of such uses while contamination with ¹³⁴
Cs in relatively fresh spent fuel makes the curve of overall radiation and heat output much steeper until most of the ¹³⁴
Cs has decayed
Can potentially recover elements like ruthenium whose ruthenate ion is particularly troublesome in PUREX and which has no isotopes significantly longer lived than a year, allowing possible recovery of the metal for use
A "third phase recovery" can be added to the process if substances that melt but don't vaporize at the temperatures involved are drained to a container for liquid effluents and allowed to re-solidify. To avoid contamination with low-boiling products which melt at low temperatures, a melt plug could be used to open the container for liquid effluents only once a certain temperature is reached by the liquid phase.
Strontium, which is present in the form of the particularly troublesome mid-lived fission product ⁹⁰
Sr is liquid above 1,050 K (780 °C; 1,430 °F). However, Strontium oxide remains solid below 2,804 K (2,531 °C; 4,588 °F) and if strontium oxide is to be recovered with other liquid effluents, it has to be reduced to the native metal before the heating step. Both Strontium and Strontium oxide form soluble Strontium hydroxide and hydrogen upon contact with water, which can be used to separate them from non-soluble parts of the spent fuel.
As there are little to no chemical changes in the spent fuel, any chemical reprocessing methods can be used following this process

Disadvantages

At temperatures above 1,000 K (730 °C; 1,340 °F) the native metal form of several actinides, including neptunium (melting point: 912 K (639 °C; 1,182 °F)) and plutonium (melting point: 912.5 K (639.4 °C; 1,182.8 °F)), are molten. This could be used to recover a liquid phase, raising proliferation concerns, given that uranium metal remains a solid until 1,405.3 K (1,132.2 °C; 2,069.9 °F). While neptunium and plutonium cannot be easily separated from each other by different melting points, their differing solubility in water can be used to separate them.
If "nuclear self heating" is employed, the spent fuel with have much higher specific activity, heat production and radiation release. If an external heat source is used, significant amounts of external power are needed, which mostly go to heat the uranium.
Heating and cooling the vacuum chamber and/or the piping and vessels to collect volatile effluents induces thermal stress. This combines with radiation damage to material and possibly neutron embrittlement if neutron sources such as californium-252 are present to a significant extent.
In the commonly used oxide fuel, some elements will be present both as oxides and as native elements. Depending on their chemical state, they may end up in either the volatalized stream or in the residue stream. If an element is present in both states to a significant degree, separation of that element may be impossible without converting it all to one chemical state or the other
The temperatures involved are much higher than the melting point of lead (600.61 K (327.46 °C; 621.43 °F)) which can present issues with radiation shielding if lead is employed as a shielding material
If filters are used to recover volatile fission products, those become low- to intermediate level waste.

Fluoride volatility

In the fluoride volatility process, fluorine is reacted with the fuel. Fluorine is so much more reactive than even oxygen that small particles of ground oxide fuel will burst into flame when dropped into a chamber full of fluorine. This is known as flame fluorination; the heat produced helps the reaction proceed. Most of the uranium, which makes up the bulk of the fuel, is converted to uranium hexafluoride, the form of uranium used in uranium enrichment, which has a very low boiling point. Technetium, the main long-lived fission product, is also efficiently converted to its volatile hexafluoride. A few other elements also form similarly volatile hexafluorides, pentafluorides, or heptafluorides. The volatile fluorides can be separated from excess fluorine by condensation, then separated from each other by fractional distillation or selective reduction. Uranium hexafluoride and technetium hexafluoride have very similar boiling points and vapor pressures, which makes complete separation more difficult.

Many of the fission products volatilized are the same ones volatilized in non-fluorinated, higher-temperature volatilization, such as iodine, tellurium and molybdenum; notable differences are that technetium is volatilized, but caesium is not.

Some transuranium elements such as plutonium, neptunium and americium can form volatile fluorides, but these compounds are not stable when the fluorine partial pressure is decreased.^[55] Most of the plutonium and some of the uranium will initially remain in ash which drops to the bottom of the flame fluorinator. The plutonium-uranium ratio in the ash may even approximate the composition needed for fast neutron reactor fuel. Further fluorination of the ash can remove all the uranium, neptunium, and plutonium as volatile fluorides; however, some other minor actinides may not form volatile fluorides and instead remain with the alkaline fission products. Some noble metals may not form fluorides at all, but remain in metallic form; however ruthenium hexafluoride is relatively stable and volatile.

Distillation of the residue at higher temperatures can separate lower-boiling transition metal fluorides and alkali metal (Cs, Rb) fluorides from higher-boiling lanthanide and alkaline earth metal (Sr, Ba) and yttrium fluorides. The temperatures involved are much higher, but can be lowered somewhat by distilling in a vacuum. If a carrier salt like lithium fluoride or sodium fluoride is being used as a solvent, high-temperature distillation is a way to separate the carrier salt for reuse.

Molten salt reactor designs carry out fluoride volatility reprocessing continuously or at frequent intervals. The goal is to return actinides to the molten fuel mixture for eventual fission, while removing fission products that are neutron poisons, or that can be more securely stored outside the reactor core while awaiting eventual transfer to permanent storage.

Chloride volatility and solubility

Many of the elements that form volatile high-valence fluorides will also form volatile high-valence chlorides. Chlorination and distillation is another possible method for separation. The sequence of separation may differ usefully from the sequence for fluorides; for example, zirconium tetrachloride and tin tetrachloride have relatively low boiling points of 331 °C (628 °F) and 114.1 °C (237.4 °F). Chlorination has even been proposed as a method for removing zirconium fuel cladding,^[45] instead of mechanical decladding.

Chlorides are likely to be easier than fluorides to later convert back to other compounds, such as oxides.

Chlorides remaining after volatilization may also be separated by solubility in water. Chlorides of alkaline elements like americium, curium, lanthanides, strontium, caesium are more soluble than those of uranium, neptunium, plutonium, and zirconium.

Advantages of halogen volatility

Chlorine (and to a lesser extent fluorine^[56]) is a readily available industrial chemical that is produced in mass quantity^[57]
Fractional distillation allows many elements to be separated from each other in a single step or iterative repetition of the same step
Uranium will be produced directly as Uranium hexafluoride, the form used in enrichment
Many volatile fluorides and chlorides are volatile at relatively moderate temperatures reducing thermal stress. This is especially important as the boiling point of uranium hexafluoride is below that of water, allowing to conserve energy in the separation of high boiling fission products (or their fluorides) from one another as this can take place in the absence of uranium, which makes up the bulk of the mass
Some fluorides and chlorides melt at relatively low temperatures allowing a "liquid phase separation" if desired. Those low melting salts could be further processed by molten salt electrolysis.
Fluorides and chlorides differ in water solubility depending on the cation. This can be used to separate them by aqueous solution. However, some fluorides violently react with water, which has to be taken into account.

Disadvantages of halogen volatility

Many compounds of fluorine or chlorine as well as the native elements themselves are toxic, corrosive and react violently with air, water or both
Uranium hexafluoride and Technetium hexafluoride have very similar boiling points (329.6 K (56.5 °C; 133.6 °F) and 328.4 K (55.3 °C; 131.4 °F) respectively), making it hard to completely separate them from one another by distillation.
Fractional distillation as used in petroleum refining requires large facilities and huge amounts of energy. To process thousands of tons of uranium would require smaller facilities than processing billions of tons of petroleum — however, unlike petroleum refineries, the entire process would have to take place inside radiation shielding and there would have to be provisions made to prevent leaks of volatile, poisonous and radioactive fluorides.
Plutonium hexafluoride boils at 335 K (62 °C; 143 °F) this means that any facility capable of separating uranium hexafluoride from Technetium hexafluoride is capable of separating plutonium hexafluoride from either, raising proliferation concerns
The presence of alpha emitters induces some (α,n) reactions in fluorine, producing both radioactive ²²
Na and neutrons.^[58] This effect can be reduced by separating alpha emitters and fluorine as fast as feasible. Interactions between chlorine's two stable isotopes ³⁵
Cl and ³⁷
Cl on the one hand and alpha particles on the other are of lesser concern as they do not have as high a cross section and do not produce neutrons or long lived radionuclides.^[59]
If carbon is present in the spent fuel it'll form halogenated hydrocarbons which are extremely potent greenhouse gases, and hard to chemically decompose. Some of those are toxic as well.

Radioanalytical separations

To determine the distribution of radioactive metals for analytical purposes, Solvent Impregnated Resins (SIRs) can be used. SIRs are porous particles, which contain an extractant inside their pores. This approach avoids the liquid-liquid separation step required in conventional liquid-liquid extraction. For the preparation of SIRs for radioanalytical separations, organic Amberlite XAD-4 or XAD-7 can be used. Possible extractants are e.g. trihexyltetradecylphosphonium chloride(CYPHOS IL-101) or N,N0-dialkyl-N,N0-diphenylpyridine-2,6-dicarboxyamides (R-PDA; R = butyl, octy I, decyl, dodecyl).^[60]

Remove ads

The relative economics of reprocessing-waste disposal and interim storage-direct disposal was the focus of much debate over the first decade of the 2000s. Studies^[61] have modeled the total fuel cycle costs of a reprocessing-recycling system based on one-time recycling of plutonium in existing thermal reactors (as opposed to the proposed breeder reactor cycle) and compare this to the total costs of an open fuel cycle with direct disposal. The range of results produced by these studies is very wide, but all agreed that under then-current economic conditions the reprocessing-recycle option is the more costly one.^[62] While the uranium market - particularly its short term fluctuations - has only a minor impact on the cost of electricity from nuclear power, long-term trends in the uranium market do significantly affect the economics of nuclear reprocessing. If uranium prices were to rise and remain consistently high, "stretching the fuel supply" via MOX fuel, breeder reactors or even the thorium fuel cycle could become more attractive. However, if uranium prices remain low, reprocessing will remain less attractive.^{[citation needed]}

If reprocessing is undertaken only to reduce the radioactivity level of spent fuel it should be taken into account that spent nuclear fuel becomes less radioactive over time. After 40 years its radioactivity drops by 99.9%,^[63] though it still takes over a thousand years for the level of radioactivity to approach that of natural uranium.^[64] However the level of transuranic elements, including plutonium-239, remains high for over 100,000 years, so if not reused as nuclear fuel, then those elements need secure disposal because of nuclear proliferation reasons as well as radiation hazard.

On 25 October 2011 a commission of the Japanese Atomic Energy Commission revealed during a meeting calculations about the costs of recycling nuclear fuel for power generation. These costs could be twice the costs of direct geological disposal of spent fuel: the cost of extracting plutonium and handling spent fuel was estimated at 1.98 to 2.14 yen per kilowatt-hour of electricity generated. Discarding the spent fuel as waste would cost only 1 to 1.35 yen per kilowatt-hour.^[65]^[66]

In July 2004 Japanese newspapers reported that the Japanese Government had estimated the costs of disposing radioactive waste, contradicting claims four months earlier that no such estimates had been made. The cost of non-reprocessing options was estimated to be between a quarter and a third ($5.5–7.9 billion) of the cost of reprocessing ($24.7 billion). At the end of the year 2011 it became clear that Masaya Yasui, who had been director of the Nuclear Power Policy Planning Division in 2004, had instructed his subordinate in April 2004 to conceal the data. The fact that the data were deliberately concealed obliged the ministry to re-investigate the case and to reconsider whether to punish the officials involved.^[67]^[68]

Remove ads

More information Country, Reprocessing site ...

Country	Reprocessing site	Fuel type	Procedure	Reprocessing capacity tHM/yr	Commissioning or operating period
Belgium	Mol	LWR, MTR (Material test reactor)		80^[69]	1966–1974^[69]
China	intermediate pilot plant^[70]			60–100	1968-early 1970s
China	Plant 404^[71]			50	2004
China, Gansu Province	Gansu Nuclear Technology Industrial Park, Jinta				under construction (2030)
Germany	Karlsruhe, WAK	LWR^[72]		35^[69]	1971–1990^[69]
France	Marcoule, UP 1	Military		1200^[69]	1958^[69]-1997^[73]
France	Marcoule, CEA APM	FBR	PUREX DIAMEX SANEX^[74]	6^[72]	1988–present^[72]
France	La Hague, UP 2	LWR^[72]	PUREX^[75]	900^[69]	1967–1974^[69]
France	La Hague, UP 2–400	LWR^[72]	PUREX^[75]	400^[69]	1976–1990^[69]
France	La Hague, UP 2–800	LWR	PUREX^[75]	800^[69]	1990^[69]
France	La Hague, UP 3	LWR	PUREX^[75]	800^[69]	1990^[69]
UK	Windscale, B204	Magnox, LWR	BUTEX	750^[69]	1956–1962,^[69] 1969-1973
UK	Sellafield, Magnox Reprocessing Plant	Magnox,^[72] LWR, FBR	PUREX	1500^[69]	1964^[69]-2022
UK	Dounreay	FBR^[72]		8^[69]	1980^[69]
UK	THORP	AGR, LWR	PUREX	900^[69]^[76]	1994^[69]^[76]-2018
Italy	Rotondella	Thorium		5^[69]	1968^[69] (shutdown)
India	Trombay	Military	PUREX^[77]	60^[69]	1965^[69]
India	Tarapur	PHWR	PUREX	100^[69]	1982^[69]
India	Kalpakkam	PHWR and FBTR	PUREX	100^[78]	1998^[78]
India	Tarapur	PHWR		100^[79]	2011^[79]
Israel	Dimona	Military		60–100^[80]	~1960–present
Japan	Tokai	LWR^[81]		210^[69]	1977^[69]-2006^[82]
Japan	Rokkasho	LWR^[72]		800^[69]^[76]	under construction (2024)^[83]
Pakistan	New Labs, Rawalpindi	Military/Plutonium/Thorium		80^[84]	1982–present
Pakistan	Khushab Nuclear Complex, Atomic City of Pakistan	HWR/Military/Tritium		22 kg^[85]	1986–present
Russia	Mayak Plant B	Military		400	1948-196?^[86]
Russia	Mayak Plant BB, RT-1	LWR^[72]	PUREX + Np separation^[87]	400^[69]^[76]	1978^[69]
Russia	Tomsk-7 Radiochemical Plant	Military		6000^[80]	1956^[88]
Russia	Zheleznogorsk (Krasnoyarsk-26)	Military		3500^[80]	1964–~2010^[89]
Russia	Zheleznogorsk, RT-2	VVER		800^[69]	under construction (2030)
USA, WA	Hanford Site	Military	bismuth phosphate, REDOX, PUREX		1944–1988^[90]
USA, SC	Savannah River Site	Military/LWR/HWR/Tritium	PUREX, REDOX, THOREX, Np separation	5000^[91]	1952–2002
USA, NY	West Valley	LWR^[72]	PUREX	300^[69]	1966–1972^[69]
USA, SC	Barnwell	LWR	PUREX	1500^[92]	Never permitted to operate^[93]^[b]
USA, ID	INL	LWR	PUREX	–

Close

Nuclear fuel cycle
Breeder reactor
Nuclear fusion-fission hybrid
Spent nuclear fuel shipping cask
Taylor Wilson's nuclear waste-fired small reactor
Global Nuclear Energy Partnership announced February 2006

[1]
Andrews, A. (27 March 2008). Nuclear Fuel Reprocessing: U.S. Policy Archived 3 March 2016 at the Wayback Machine. CRS Report For Congress. Retrieved 25 March 2011
[2]
MOX fuel can extend the energy extracted by about 12% but slightly reduces plutonium stocks. Information from the World Nuclear Association about MOX Archived 1 March 2013 at the Wayback Machine
[3]
Harold Feiveson; et al. (2011). "Managing nuclear spent fuel: Policy lessons from a 10-country study". Bulletin of the Atomic Scientists. Archived from the original on 26 April 2012. Retrieved 8 July 2011.
[4]
"Adieu to nuclear recycling". Nature. 460 (7252): 152. 2009. Bibcode:2009Natur.460R.152.. doi:10.1038/460152b. PMID 19587715.
[5]
"Supply of Uranium". World Nuclear Association. Archived from the original on 12 February 2013. Retrieved 29 January 2010.
[6]
"Fast Neutron Reactors". World Nuclear Association. Archived from the original on 24 February 2013. Retrieved 11 March 2012.
[7]
Lanham, W. B.; Runion, T. C. (1 October 1949). "PUREX PROCESS FOR PLUTONIUM AND URANIUM RECOVERY". Other Information: Decl. with deletions Apr. 18, 1960. Orig. Receipt Date: 31-DEC-60. doi:10.2172/4165457.
[8]
"Plutonium Recovery from Spent Fuel Reprocessing by Nuclear Fuel Services at West Valley, New York from 1966 to 1972". U.S. Department of Energy. February 1996. Archived from the original on 14 March 2021. Retrieved 17 June 2007.
[9]
Gerald Ford 28 October 1976 Statement on Nuclear Policy Archived 26 September 2018 at the Wayback Machine. Retrieved 30 June 2012.
[10]
Dr. Ned Xoubi (2008). "The Politics, Science, Environment, and common sense of Spent Nuclear Fuel Reprocessing 3 decades Later" (PDF). Symposium on the Technology of Peaceful Nuclear Energy, Irbid, Jordan. Archived from the original (PDF) on 16 May 2011.
[11]
"Depleted Cranium » Blog Archive » Why You Can't Build a Bomb from Spent Fuel". Archived from the original on 4 February 2012.
[12]
"Proving a Negative – Why Modern Used Nuclear Fuel Cannot Be Used to Make a Weapon – Atomic Insights". Atomic Insights. 17 February 2015. Archived from the original on 7 January 2018. Retrieved 4 April 2018.
[13]
Nuclear Fuel Reprocessing: U.S. Policy Development Archived 3 March 2016 at the Wayback Machine. (PDF). Retrieved 10 December 2011.
[14]
Duke, Cogema, Stone & Webster (DCS) Reports sent to NRC Archived 23 June 2017 at the Wayback Machine. Nrc.gov. Retrieved 10 December 2011.
[15]
New Doubts About Turning Plutonium Into a Fuel Archived 11 September 2017 at the Wayback Machine, 10 April 2011
[16]
U.S. Program for Disposition of Excess Weapons Plutonium Archived 8 April 2016 at the Wayback Machine, IAEA-SM-346/102, Matthew Bunn, 2002.
[17]
Irvine, Maxwell (2011). Nuclear power : a very short introduction. Oxford: Oxford University Press. p. 55. ISBN 9780199584970. Archived from the original on 28 March 2020. Retrieved 22 February 2016.
[18]
"Nuclear Energy: Fuel of the Future?". Princeton University. Archived from the original on 1 October 2012. Retrieved 6 April 2013.
[19]
C. Hill, D. Guillaneux, X. Hérès, N. Boubals and L. Ramain SANEX-BTP PROCESS DEVELOPMENT STUDIES Archived 15 November 2012 at the Wayback Machine
[20]
C. Hill, L. Berthon, P. Bros, J-P. Dancausse and D. Guillaneux SANEX-BTP PROCESS DEVELOPMENT STUDIES Archived 5 September 2009 at the Wayback Machine. Commissariat à l'Énergie Atomique
[21]
Béatrice Rat, Xavier Hérès Modelling and achievement of a SANEX process flowsheet for trivalent actinides/lanthanides separation using BTP extractant (bis-1,2,4-triazinyl-pyridine). Archived 16 October 2005 at the Wayback Machine
[22]
"U.S.-Russia Team Makes Treating Nuclear Waste Easier". U.S. embassy press release(?). 19 December 2001. Archived from the original on 28 July 2014. Retrieved 14 June 2007.
[23]
J. Banaee; et al. (1 September 2001). "INTEC High-Level Waste Studies Universal Solvent Extraction Feasibility Study". INEEL Technical report. Archived from the original on 13 May 2013. Retrieved 28 January 2006.
[24]
Law, Jack D.; Herbst, R. Scott; Todd, Terry A.; Romanovskiy, Valeriy N.; Babain, Vasily A.; Esimantovskiy, Vyatcheslav M.; Smirnov, Igor V.; Zaitsev, Boris N. (2001). "The Universal Solvent Extraction (Unex) Process. Ii. Flowsheet Development and Demonstration of the Unex Process for the Separation of Cesium, Strontium, and Actinides from Actual Acidic Radioactive Waste". Solvent Extraction and Ion Exchange. 19: 23. doi:10.1081/SEI-100001371. S2CID 98103735.
[25]
Romanovskiy, Valeriy N.; Smirnov, Igor V.; Babain, Vasily A.; Todd, Terry A.; Herbst, R. Scott; Law, Jack D.; Brewer, Ken N. (2001). "The Universal Solvent Extraction (Unex) Process. I. Development of the Unex Process Solvent for the Separation of Cesium, Strontium, and the Actinides from Acidic Radioactive Waste". Solvent Extraction and Ion Exchange. 19: 1. doi:10.1081/SEI-100001370. S2CID 98166395.
[26]
https://archivedproceedings.econference.io/wmsym/2014/papers/14154.pdf ^{[bare URL PDF]}
[27]
J.D. Law; et al. (1 March 2001). "Flowsheet testing of the universal solvent extraction process for the simultaneous separation of caesium, strontium, and the actinides from dissolved INEEL calcine" (PDF). WM 2001 conference proceedings. Archived from the original (PDF) on 28 September 2007. Retrieved 17 June 2006.
[28]
Asanuma, Noriko; et al. (2006). "Andodic dissociation of UO₂ pellet containing simulated fission products in ammonium carbonate solution". Journal of Nuclear Science and Technology. 43 (3): 255–262. doi:10.3327/jnst.43.255.^{[dead link‍]}
[29]
US 4366126, Gardner, Harry E., "Recovery of uranium from uranium bearing solutions containing molybdenum", published 1982-12-28, assigned to Union Carbide Corp.
[30]
Gerber, Michelle. "The plutonium production story at the Hanford Site: processes and facilities history (WHC-MR-0521) (excerpts)". Department of Energy. Archived from the original on 11 May 2006. Retrieved 7 January 2006.
[31]
US 2950166, Seaborg, Glenn T.; Blaedel, Jr., Walter J. & Walling, Matthew T., "Method for separation of plutonium from uranium and fission products by solvent extraction", published 1960-08-23, assigned to United States Atomic Energy Commission
[32]
L.W. Gray (15 April 1999). "From separations to reconstitution—a short history of plutonium in the U.S. and Russia (UCRL-JC-133802)" (PDF). Lawrence Livermore National Laboratory preprint. Archived (PDF) from the original on 29 November 2007. Retrieved 7 January 2006.
[33]
Taylor, Robin (2015). Reprocessing and Recycling of Spent Nuclear Fuel. Woodhead Publishing.
[34]
Foreman, Mark R. St J. (2018). "Reactor accident chemistry an update". Cogent Chemistry. 4 (1). doi:10.1080/23312009.2018.1450944.
[35]
"Processing of Used Nuclear Fuel". World Nuclear Association. December 2020. Archived from the original on 28 September 2022. Retrieved 4 October 2022.
[36]
L.C. Walters (18 September 1998). "Thirty years of fuels and materials information from EBR-II". Journal of Nuclear Materials. 270 (1): 39–48. Bibcode:1999JNuM..270...39W. doi:10.1016/S0022-3115(98)00760-0. Archived from the original on 31 January 2021. Retrieved 17 March 2021.
[37]
"APS - Physics and Society Newsletter - July 2004 - PUREX AND PYRO ARE NOT THE SAME". Archived from the original on 5 August 2020. Retrieved 9 August 2023. PUREX and PYRO are not the same, Hannum, Marsh, Stanford.
[38]
"Pyroprocessing Development". Argonne National Laboratory. Archived from the original on 24 June 2016. Retrieved 6 June 2016.
[39]
"Pyroprocessing Technologies: Recycling used nuclear fuel for a sustainable energy future" (PDF). Argonne National Laboratory. 2012. p. 7. Archived from the original (PDF) on 19 February 2013. Retrieved 6 June 2016.
[40]
T. Inoue. "An Overview of CRIEPI Pyroprocessing Activities" (PDF). Archived from the original (PDF) on 13 July 2017. Retrieved 20 May 2019.
[41]
Tulackova, R., et al. "Development of Pyrochemical Reprocessing of the Spent Nuclear Fuel and Prospects of Closed Fuel Cycle." Atom Indonesia 33.1 (2007): 47–59.
[42]
Nagarajan, K., et al. "Current status of pyrochemical reprocessing research in India." Nuclear Technology 162.2 (2008): 259–263.
[43]
Lee, Hansoo, et al. "Development of Pyro-processing Technology at KAERI." (2009).
[44]
"PYROPROCESSING PROGRESS AT IDAHO NATIONAL LABORATORY" (PDF). Idaho National Laboratory article. September 2007. Archived from the original (PDF) on 12 June 2011.
[45]
Guillermo D. Del Cul; et al. "Advanced Head-End Processing of Spent Fuel: A Progress Report" (PDF). 2005 ANS annual meeting. Oak Ridge National Laboratory, U.S. DOE. Archived from the original (PDF) on 7 March 2006. Retrieved 3 May 2008.
[46]
"Limited Proliferation-Resistance Benefits from Recycling Unseparated Transuranics and Lanthanides from Light-Water Reactor Spent Fuel" (PDF). p. 4. Archived (PDF) from the original on 26 March 2013. Retrieved 25 April 2011.
[47]
Morss, L. R. The chemistry of the actinide and transactinide elements. Eds. Lester R. Morss, et al. Vol. 1. Dordrecht: Springer, 2006.
[48]
"Development of pyro-process fuel cell technology" (PDF). CRIEPI News. July 2002. Archived from the original (PDF) on 25 February 2009. Retrieved 22 June 2009.
[49]
Masatoshi Iizuka (12 December 2001). "Development of plutonium recovery process by molten salt electrorefining with liquid cadmium cathode" (PDF). Proceedings of the 6th information exchange meeting on actinide and fission product partitioning and transmutation (Madrid, Spain). Archived from the original (PDF) on 5 September 2009. Retrieved 22 June 2009.
[50]
R. Tulackova (Zvejskova), K. Chuchvalcova Bimova, P. Soucek, F. Lisy Study of Electrochemical Processes for Separation of the Actinides and Lanthanides in Molten Fluoride Media Archived 5 September 2009 at the Wayback Machine (PPT file). Nuclear Research Institute Rez plc, Czech Republic
[51]
Electrochemical Behaviours of Lanthanide Fluorides in the Electrolysis System with LiF-NaF-KF Salt Archived 5 September 2009 at the Wayback Machine. (PDF) . Retrieved 10 December 2011.
[52]
Ionic Liquids/Molten Salts and Lanthanides/Actinides Reference List. Merck.de. Retrieved 10 December 2011.
[53]
"Advanced Fuel Cycle Initiative". U.S. Department of Energy. Archived from the original on 10 May 2012. Retrieved 3 May 2008.
[54]
Wolverton, Daren; et al. (11 May 2005). "Removal of caesium from spent nuclear fuel destined for the electrorefiner fuel treatment process" (PDF). University of Idaho (dissertation?). Archived from the original (PDF) on 29 November 2007.
[55]
Neeb, Karl-Heinz (1997). The radiochemistry of nuclear power plants with light water reactors. Walter de Gruyter. ISBN 978-3-11-013242-7. Archived from the original on 25 January 2022. Retrieved 29 November 2021.
[56]
"Fluorine". essentialchemicalindustry.org. 10 October 2016. Archived from the original on 25 April 2022. Retrieved 4 October 2022.
[57]
"Chlorine Manufacturing Industry in the US". ibisworld.com. 28 June 2022. Archived from the original on 23 February 2022. Retrieved 4 October 2022.
[58]
Vlaskin, Gennady N.; Bedenko, Sergey V.; Polozkov, Sergey D.; Ghal-Eh, Nima; Rahmani, Faezeh (2023). "Neutron and gamma-ray signatures for the control of alpha-emitting materials in uranium production: A Nedis2m-MCNP6 simulation". Radiation Physics and Chemistry. 208: 110919. Bibcode:2023RaPC..20810919V. doi:10.1016/j.radphyschem.2023.110919. S2CID 257588532. Retrieved 9 August 2023.
[59]
Dead link ^{[dead link‍]}
[60]
Kabay, N.; Cortina, J.L.; Trochimczuk, A.; Streat, M. (2010). "Solvent-impregnated resins (SIRs) – Methods of preparation and their applications". React. Funct. Polym. 70 (8): 484–496. Bibcode:2010RFPol..70..484K. doi:10.1016/j.reactfunctpolym.2010.01.005. hdl:2117/10365.
[61]
"Advanced Fuel Cycle Cost Basis" (PDF). Idaho National Laboratory, United States Department of Energy. Archived from the original (PDF) on 28 November 2011. Retrieved 19 December 2010.
[62]
"Recycled Nuclear Fuel Cost Calculator". www.wise-uranium.org. Archived from the original on 16 April 2013. Retrieved 4 April 2018.
[63]
"Waste Management and Disposal". World Nuclear Association. Archived from the original on 27 February 2013. Retrieved 3 May 2008.
[64]
"Radioactive Wastes: Myths and Realities". World Nuclear Association. June 2006. Archived from the original on 2 March 2013. Retrieved 3 May 2008.
[65]
NHK-world (26 October 2011) Nuclear fuel recycling costs Archived 10 August 2011 at the Wayback Machine
[66]
JAIF (26 October 2011) Nuclear fuel recycling costs
[67]
"Cover-up of estimated costs to dispose of radioactive waste raises serious questions". The Mainichi Daily News. 2 January 2012. Archived from the original on 27 February 2021. Retrieved 8 January 2012.
[68]
Mycle, Schneider (2 January 2012). "Japanese mislead about spent fuel reprocessing costs". International Panel on Fissile Materials. Archived from the original on 27 February 2021. Retrieved 8 January 2012.
[69]
"Reprocessing plants, world-wide". European Nuclear Society. Archived from the original on 22 June 2015. Retrieved 29 July 2008.
[70]
Wright, David; Gronlund, Lisbeth (2003). "Estimating China's Production of Plutonium for Weapons" (PDF). Science & Global Security. 11 (1): 61–80. Bibcode:2003S&GS...11...61W. doi:10.1080/08929880309007. S2CID 55755131. Archived (PDF) from the original on 19 October 2012. Retrieved 14 January 2011.
[71]
, Jiuquan Atomic Energy Complex All Things Nuclear • China and Reprocessing: Separating Fact from Fiction Archived 18 March 2011 at the Wayback Machine. Allthingsnuclear.org (11 January 2011). Retrieved 10 December 2011.
[72]
"Civil Reprocessing Facilities" (PDF). Princeton University. Archived (PDF) from the original on 2 August 2020. Retrieved 30 July 2008.
[73]
"Marcoule – Valrho". Global Security. Archived from the original on 23 September 2020. Retrieved 30 July 2008.
[74]
Dominique Warin (2007). "Status of the French Research Program on Partitioning and Transmutation". Journal of Nuclear Science and Technology. 44 (3): 410. doi:10.3327/jnst.44.410.^{[dead link‍]}
[75]
"BASSE-NORMANDIE- LOWER NORMANDY, La Hague". France Nucleaire. Archived from the original on 16 July 2011. Retrieved 31 July 2008.
[76]
"Processing of Used Nuclear Fuel". World Nuclear Association. September 2013. Archived from the original on 23 January 2016. Retrieved 5 December 2013.
[77]
"CIRUS and DHRUVA Reactors, Trombay". Global Security. Archived from the original on 26 January 2021. Retrieved 30 July 2008.
[78]
"Kalpakkam Atomic Reprocessing Plant [KARP]". Global Security. Archived from the original on 26 January 2021. Retrieved 30 July 2008.
[79]
PM to dedicate Tarapur nuke reprocessing unit next week Archived 9 October 2012 at the Wayback Machine. Business-standard.com. Retrieved 10 December 2011.
[80]
"Global Fissile Material Report 2010" (PDF). International Panel on Fissile Materials. Archived from the original (PDF) on 24 April 2020.
[81]
"Tokai Reprocessing Plant (TRP)". Global Security. Archived from the original on 23 September 2020. Retrieved 30 July 2008.
[82]
Kramer, D. (2012). "Is Japan ready to forgo nuclear reprocessing?". Physics Today. 65 (3): 25–42. Bibcode:2012PhT....65c..25K. doi:10.1063/PT.3.1469.
[83]
"Further delay to completion of Rokkasho facilities". World Nuclear News. 28 December 2017. Archived from the original on 29 December 2017. Retrieved 28 December 2017.
[84]
"Rawalpindi / Nilhore". Federation of American Scientists. Archived from the original on 4 March 2016.
[85]
"Pakistan's Indigenous Nuclear Reactor Starts Up". The Nation. 13 April 1998.
[86]
"Chelyabinsk-65". Global Security. Archived from the original on 3 September 2010. Retrieved 29 July 2008.
[87]
S. Guardini; et al. (16 June 2003). "Modernization and Enhancement of NMAC at the Mayak RT-1 Plant". INMM. Archived from the original on 28 July 2014. Retrieved 9 August 2008.
[88]
"Tomsk-7 / Seversk". Global Security. Archived from the original on 29 July 2020. Retrieved 1 June 2020.
[89]
"Krasnoyarsk-26 / Zheleznogorsk". Global Security. Archived from the original on 31 July 2020. Retrieved 1 June 2020.
[90]
"T Plant overview". Department of energy. Archived from the original on 18 March 2021. Retrieved 9 April 2011.
[91]
LeVerne Fernandez. "Savannah River Site Canyons—Nimble Behemoths of the Atomic Age (WSRC-MS-2000-00061)" (PDF). Archived (PDF) from the original on 3 March 2016. Retrieved 9 April 2011.
[92]
Plutonium Consumption Program, CANDU Reactor Project: Feasibility of BNFP Site as MOX Fuel Supply Facility. Final report (Report). 30 June 1995. p. 3-1. doi:10.2172/82369.
[93]
"West Valley Demonstration Project", Wikipedia, 1 December 2018, archived from the original on 25 January 2022, retrieved 13 April 2020

a radioisotope with a two year half life will retain 0.5^0.5 or over 70% of its power after a year - all those isotopes have half lives longer than two years and would thus retain even more power. Even if the yearly refueling window were to be missed, over half the power would still remain for the second refueling window
Construction completed in 1976^[92]

Williamson, M.A.; Willit, J.L. (2011). "Pyroprocessing Flowsheets for Recycling Used Nuclear Fuel" (PDF). Nuclear Engineering and Technology. 43 (4): 329–334. doi:10.5516/NET.2011.43.4.329.
Till, C.E.; Chang, Y.I; Hannum, W.H. (1997). "The integral fast reactor-an overview". Progress in Nuclear Energy. 31 (1–2): 3–11. Bibcode:1997PNuE...31....3T. doi:10.1016/0149-1970(96)00001-7.
OECD Nuclear Energy Agency, The Economics of the Nuclear Fuel Cycle, Paris, 1994
I. Hensing and W Schultz, Economic Comparison of Nuclear Fuel Cycle Options, Energiewirtschaftlichen Instituts, Cologne, 1995.
Cogema, Reprocessing-Recycling: the Industrial Stakes, presentation to the Konrad-Adenauer-Stiftung, Bonn, 9 May 1995.
OECD Nuclear Energy Agency, Plutonium Fuel: An Assessment, Paris, 1989.
National Research Council, "Nuclear Wastes: Technologies for Separation and Transmutation", National Academy Press, Washington D.C. 1996.

Processing of Used Nuclear Fuel, World Nuclear Association
PUREX Process, European Nuclear Society
Mixed Oxide Fuel (MOX) – World Nuclear Association
Disposal Options for Surplus Weapons-Usable Plutonium – Congressional Research Service Report for Congress
Brief History of Fuel Reprocessing
Annotated bibliography for reprocessing spent nuclear fuel from the Alsos Digital Library for Nuclear Issues

[1] [1]
Andrews, A. (27 March 2008). Nuclear Fuel Reprocessing: U.S. Policy Archived 3 March 2016 at the Wayback Machine. CRS Report For Congress. Retrieved 25 March 2011

[2] [2]
MOX fuel can extend the energy extracted by about 12% but slightly reduces plutonium stocks. Information from the World Nuclear Association about MOX Archived 1 March 2013 at the Wayback Machine

[bas2011-3] [3]
Harold Feiveson; et al. (2011). "Managing nuclear spent fuel: Policy lessons from a 10-country study". Bulletin of the Atomic Scientists. Archived from the original on 26 April 2012. Retrieved 8 July 2011.

[4] [4]
"Adieu to nuclear recycling". Nature. 460 (7252): 152. 2009. Bibcode:2009Natur.460R.152.. doi:10.1038/460152b. PMID 19587715.

[5] [5]
"Supply of Uranium". World Nuclear Association. Archived from the original on 12 February 2013. Retrieved 29 January 2010.

[6] [6]
"Fast Neutron Reactors". World Nuclear Association. Archived from the original on 24 February 2013. Retrieved 11 March 2012.

[7] [7]
Lanham, W. B.; Runion, T. C. (1 October 1949). "PUREX PROCESS FOR PLUTONIUM AND URANIUM RECOVERY". Other Information: Decl. with deletions Apr. 18, 1960. Orig. Receipt Date: 31-DEC-60. doi:10.2172/4165457.

[8] [8]
"Plutonium Recovery from Spent Fuel Reprocessing by Nuclear Fuel Services at West Valley, New York from 1966 to 1972". U.S. Department of Energy. February 1996. Archived from the original on 14 March 2021. Retrieved 17 June 2007.

[9] [9]
Gerald Ford 28 October 1976 Statement on Nuclear Policy Archived 26 September 2018 at the Wayback Machine. Retrieved 30 June 2012.

[10] [10]
Dr. Ned Xoubi (2008). "The Politics, Science, Environment, and common sense of Spent Nuclear Fuel Reprocessing 3 decades Later" (PDF). Symposium on the Technology of Peaceful Nuclear Energy, Irbid, Jordan. Archived from the original (PDF) on 16 May 2011.

[11] [11]
"Depleted Cranium » Blog Archive » Why You Can't Build a Bomb from Spent Fuel". Archived from the original on 4 February 2012.

[12] [12]
"Proving a Negative – Why Modern Used Nuclear Fuel Cannot Be Used to Make a Weapon – Atomic Insights". Atomic Insights. 17 February 2015. Archived from the original on 7 January 2018. Retrieved 4 April 2018.

[13] [13]
Nuclear Fuel Reprocessing: U.S. Policy Development Archived 3 March 2016 at the Wayback Machine. (PDF). Retrieved 10 December 2011.

[14] [14]
Duke, Cogema, Stone & Webster (DCS) Reports sent to NRC Archived 23 June 2017 at the Wayback Machine. Nrc.gov. Retrieved 10 December 2011.

[15] [15]
New Doubts About Turning Plutonium Into a Fuel Archived 11 September 2017 at the Wayback Machine, 10 April 2011

[16] [16]
U.S. Program for Disposition of Excess Weapons Plutonium Archived 8 April 2016 at the Wayback Machine, IAEA-SM-346/102, Matthew Bunn, 2002.

[17] [17]
Irvine, Maxwell (2011). Nuclear power : a very short introduction. Oxford: Oxford University Press. p. 55. ISBN 9780199584970. Archived from the original on 28 March 2020. Retrieved 22 February 2016.

[18] [18]
"Nuclear Energy: Fuel of the Future?". Princeton University. Archived from the original on 1 October 2012. Retrieved 6 April 2013.

[19] [19]
C. Hill, D. Guillaneux, X. Hérès, N. Boubals and L. Ramain SANEX-BTP PROCESS DEVELOPMENT STUDIES Archived 15 November 2012 at the Wayback Machine

[20] [20]
C. Hill, L. Berthon, P. Bros, J-P. Dancausse and D. Guillaneux SANEX-BTP PROCESS DEVELOPMENT STUDIES Archived 5 September 2009 at the Wayback Machine. Commissariat à l'Énergie Atomique

[21] [21]
Béatrice Rat, Xavier Hérès Modelling and achievement of a SANEX process flowsheet for trivalent actinides/lanthanides separation using BTP extractant (bis-1,2,4-triazinyl-pyridine). Archived 16 October 2005 at the Wayback Machine

[22] [22]
"U.S.-Russia Team Makes Treating Nuclear Waste Easier". U.S. embassy press release(?). 19 December 2001. Archived from the original on 28 July 2014. Retrieved 14 June 2007.

[23] [23]
J. Banaee; et al. (1 September 2001). "INTEC High-Level Waste Studies Universal Solvent Extraction Feasibility Study". INEEL Technical report. Archived from the original on 13 May 2013. Retrieved 28 January 2006.

[24] [24]
Law, Jack D.; Herbst, R. Scott; Todd, Terry A.; Romanovskiy, Valeriy N.; Babain, Vasily A.; Esimantovskiy, Vyatcheslav M.; Smirnov, Igor V.; Zaitsev, Boris N. (2001). "The Universal Solvent Extraction (Unex) Process. Ii. Flowsheet Development and Demonstration of the Unex Process for the Separation of Cesium, Strontium, and Actinides from Actual Acidic Radioactive Waste". Solvent Extraction and Ion Exchange. 19: 23. doi:10.1081/SEI-100001371. S2CID 98103735.

[25] [25]
Romanovskiy, Valeriy N.; Smirnov, Igor V.; Babain, Vasily A.; Todd, Terry A.; Herbst, R. Scott; Law, Jack D.; Brewer, Ken N. (2001). "The Universal Solvent Extraction (Unex) Process. I. Development of the Unex Process Solvent for the Separation of Cesium, Strontium, and the Actinides from Acidic Radioactive Waste". Solvent Extraction and Ion Exchange. 19: 1. doi:10.1081/SEI-100001370. S2CID 98166395.

[26] [26]
https://archivedproceedings.econference.io/wmsym/2014/papers/14154.pdf ^{[bare URL PDF]}

[27] [27]
J.D. Law; et al. (1 March 2001). "Flowsheet testing of the universal solvent extraction process for the simultaneous separation of caesium, strontium, and the actinides from dissolved INEEL calcine" (PDF). WM 2001 conference proceedings. Archived from the original (PDF) on 28 September 2007. Retrieved 17 June 2006.

[:0-28] [28]
Asanuma, Noriko; et al. (2006). "Andodic dissociation of UO₂ pellet containing simulated fission products in ammonium carbonate solution". Journal of Nuclear Science and Technology. 43 (3): 255–262. doi:10.3327/jnst.43.255.^{[dead link‍]}

[29] [29]
US 4366126, Gardner, Harry E., "Recovery of uranium from uranium bearing solutions containing molybdenum", published 1982-12-28, assigned to Union Carbide Corp.

[30] [30]
Gerber, Michelle. "The plutonium production story at the Hanford Site: processes and facilities history (WHC-MR-0521) (excerpts)". Department of Energy. Archived from the original on 11 May 2006. Retrieved 7 January 2006.

[31] [31]
US 2950166, Seaborg, Glenn T.; Blaedel, Jr., Walter J. & Walling, Matthew T., "Method for separation of plutonium from uranium and fission products by solvent extraction", published 1960-08-23, assigned to United States Atomic Energy Commission

[32] [32]
L.W. Gray (15 April 1999). "From separations to reconstitution—a short history of plutonium in the U.S. and Russia (UCRL-JC-133802)" (PDF). Lawrence Livermore National Laboratory preprint. Archived (PDF) from the original on 29 November 2007. Retrieved 7 January 2006.

[33] [33]
Taylor, Robin (2015). Reprocessing and Recycling of Spent Nuclear Fuel. Woodhead Publishing.

[34] [34]
Foreman, Mark R. St J. (2018). "Reactor accident chemistry an update". Cogent Chemistry. 4 (1). doi:10.1080/23312009.2018.1450944.

[35] [35]
"Processing of Used Nuclear Fuel". World Nuclear Association. December 2020. Archived from the original on 28 September 2022. Retrieved 4 October 2022.

[36] [36]
L.C. Walters (18 September 1998). "Thirty years of fuels and materials information from EBR-II". Journal of Nuclear Materials. 270 (1): 39–48. Bibcode:1999JNuM..270...39W. doi:10.1016/S0022-3115(98)00760-0. Archived from the original on 31 January 2021. Retrieved 17 March 2021.

[37] [37]
"APS - Physics and Society Newsletter - July 2004 - PUREX AND PYRO ARE NOT THE SAME". Archived from the original on 5 August 2020. Retrieved 9 August 2023. PUREX and PYRO are not the same, Hannum, Marsh, Stanford.

[38] [38]
"Pyroprocessing Development". Argonne National Laboratory. Archived from the original on 24 June 2016. Retrieved 6 June 2016.

[39] [39]
"Pyroprocessing Technologies: Recycling used nuclear fuel for a sustainable energy future" (PDF). Argonne National Laboratory. 2012. p. 7. Archived from the original (PDF) on 19 February 2013. Retrieved 6 June 2016.

[40] [40]
T. Inoue. "An Overview of CRIEPI Pyroprocessing Activities" (PDF). Archived from the original (PDF) on 13 July 2017. Retrieved 20 May 2019.

[41] [41]
Tulackova, R., et al. "Development of Pyrochemical Reprocessing of the Spent Nuclear Fuel and Prospects of Closed Fuel Cycle." Atom Indonesia 33.1 (2007): 47–59.

[42] [42]
Nagarajan, K., et al. "Current status of pyrochemical reprocessing research in India." Nuclear Technology 162.2 (2008): 259–263.

[43] [43]
Lee, Hansoo, et al. "Development of Pyro-processing Technology at KAERI." (2009).

[44] [44]
"PYROPROCESSING PROGRESS AT IDAHO NATIONAL LABORATORY" (PDF). Idaho National Laboratory article. September 2007. Archived from the original (PDF) on 12 June 2011.

[advancedheadend-45] [45]
Guillermo D. Del Cul; et al. "Advanced Head-End Processing of Spent Fuel: A Progress Report" (PDF). 2005 ANS annual meeting. Oak Ridge National Laboratory, U.S. DOE. Archived from the original (PDF) on 7 March 2006. Retrieved 3 May 2008.

[46] [46]
"Limited Proliferation-Resistance Benefits from Recycling Unseparated Transuranics and Lanthanides from Light-Water Reactor Spent Fuel" (PDF). p. 4. Archived (PDF) from the original on 26 March 2013. Retrieved 25 April 2011.

[48] [47]
Morss, L. R. The chemistry of the actinide and transactinide elements. Eds. Lester R. Morss, et al. Vol. 1. Dordrecht: Springer, 2006.

[49] [48]
"Development of pyro-process fuel cell technology" (PDF). CRIEPI News. July 2002. Archived from the original (PDF) on 25 February 2009. Retrieved 22 June 2009.

[50] [49]
Masatoshi Iizuka (12 December 2001). "Development of plutonium recovery process by molten salt electrorefining with liquid cadmium cathode" (PDF). Proceedings of the 6th information exchange meeting on actinide and fission product partitioning and transmutation (Madrid, Spain). Archived from the original (PDF) on 5 September 2009. Retrieved 22 June 2009.

[51] [50]
R. Tulackova (Zvejskova), K. Chuchvalcova Bimova, P. Soucek, F. Lisy Study of Electrochemical Processes for Separation of the Actinides and Lanthanides in Molten Fluoride Media Archived 5 September 2009 at the Wayback Machine (PPT file). Nuclear Research Institute Rez plc, Czech Republic

[52] [51]
Electrochemical Behaviours of Lanthanide Fluorides in the Electrolysis System with LiF-NaF-KF Salt Archived 5 September 2009 at the Wayback Machine. (PDF) . Retrieved 10 December 2011.

[53] [52]
Ionic Liquids/Molten Salts and Lanthanides/Actinides Reference List. Merck.de. Retrieved 10 December 2011.

[54] [53]
"Advanced Fuel Cycle Initiative". U.S. Department of Energy. Archived from the original on 10 May 2012. Retrieved 3 May 2008.

[55] [54]
Wolverton, Daren; et al. (11 May 2005). "Removal of caesium from spent nuclear fuel destined for the electrorefiner fuel treatment process" (PDF). University of Idaho (dissertation?). Archived from the original (PDF) on 29 November 2007.

[56] [55]
Neeb, Karl-Heinz (1997). The radiochemistry of nuclear power plants with light water reactors. Walter de Gruyter. ISBN 978-3-11-013242-7. Archived from the original on 25 January 2022. Retrieved 29 November 2021.

[57] [56]
"Fluorine". essentialchemicalindustry.org. 10 October 2016. Archived from the original on 25 April 2022. Retrieved 4 October 2022.

[58] [57]
"Chlorine Manufacturing Industry in the US". ibisworld.com. 28 June 2022. Archived from the original on 23 February 2022. Retrieved 4 October 2022.

[59] [58]
Vlaskin, Gennady N.; Bedenko, Sergey V.; Polozkov, Sergey D.; Ghal-Eh, Nima; Rahmani, Faezeh (2023). "Neutron and gamma-ray signatures for the control of alpha-emitting materials in uranium production: A Nedis2m-MCNP6 simulation". Radiation Physics and Chemistry. 208: 110919. Bibcode:2023RaPC..20810919V. doi:10.1016/j.radphyschem.2023.110919. S2CID 257588532. Retrieved 9 August 2023.

[60] [59]
Dead link ^{[dead link‍]}

[61] [60]
Kabay, N.; Cortina, J.L.; Trochimczuk, A.; Streat, M. (2010). "Solvent-impregnated resins (SIRs) – Methods of preparation and their applications". React. Funct. Polym. 70 (8): 484–496. Bibcode:2010RFPol..70..484K. doi:10.1016/j.reactfunctpolym.2010.01.005. hdl:2117/10365.

[62] [61]
"Advanced Fuel Cycle Cost Basis" (PDF). Idaho National Laboratory, United States Department of Energy. Archived from the original (PDF) on 28 November 2011. Retrieved 19 December 2010.

[63] [62]
"Recycled Nuclear Fuel Cost Calculator". www.wise-uranium.org. Archived from the original on 16 April 2013. Retrieved 4 April 2018.

[64] [63]
"Waste Management and Disposal". World Nuclear Association. Archived from the original on 27 February 2013. Retrieved 3 May 2008.

[65] [64]
"Radioactive Wastes: Myths and Realities". World Nuclear Association. June 2006. Archived from the original on 2 March 2013. Retrieved 3 May 2008.

[66] [65]
NHK-world (26 October 2011) Nuclear fuel recycling costs Archived 10 August 2011 at the Wayback Machine

[67] [66]
JAIF (26 October 2011) Nuclear fuel recycling costs

[68] [67]
"Cover-up of estimated costs to dispose of radioactive waste raises serious questions". The Mainichi Daily News. 2 January 2012. Archived from the original on 27 February 2021. Retrieved 8 January 2012.

[69] [68]
Mycle, Schneider (2 January 2012). "Japanese mislead about spent fuel reprocessing costs". International Panel on Fissile Materials. Archived from the original on 27 February 2021. Retrieved 8 January 2012.

[EuroNuclear-70] [69]
"Reprocessing plants, world-wide". European Nuclear Society. Archived from the original on 22 June 2015. Retrieved 29 July 2008.

[71] [70]
Wright, David; Gronlund, Lisbeth (2003). "Estimating China's Production of Plutonium for Weapons" (PDF). Science & Global Security. 11 (1): 61–80. Bibcode:2003S&GS...11...61W. doi:10.1080/08929880309007. S2CID 55755131. Archived (PDF) from the original on 19 October 2012. Retrieved 14 January 2011.

[72] [71]
, Jiuquan Atomic Energy Complex All Things Nuclear • China and Reprocessing: Separating Fact from Fiction Archived 18 March 2011 at the Wayback Machine. Allthingsnuclear.org (11 January 2011). Retrieved 10 December 2011.

[Princeton-73] [72]
"Civil Reprocessing Facilities" (PDF). Princeton University. Archived (PDF) from the original on 2 August 2020. Retrieved 30 July 2008.

[74] [73]
"Marcoule – Valrho". Global Security. Archived from the original on 23 September 2020. Retrieved 30 July 2008.

[75] [74]
Dominique Warin (2007). "Status of the French Research Program on Partitioning and Transmutation". Journal of Nuclear Science and Technology. 44 (3): 410. doi:10.3327/jnst.44.410.^{[dead link‍]}

[FranceNucleaire-76] [75]
"BASSE-NORMANDIE- LOWER NORMANDY, La Hague". France Nucleaire. Archived from the original on 16 July 2011. Retrieved 31 July 2008.

[wnalist13-77] [76]
"Processing of Used Nuclear Fuel". World Nuclear Association. September 2013. Archived from the original on 23 January 2016. Retrieved 5 December 2013.

[78] [77]
"CIRUS and DHRUVA Reactors, Trombay". Global Security. Archived from the original on 26 January 2021. Retrieved 30 July 2008.

[GlobalSecurityKARP-79] [78]
"Kalpakkam Atomic Reprocessing Plant [KARP]". Global Security. Archived from the original on 26 January 2021. Retrieved 30 July 2008.

[BusStd-80] [79]
PM to dedicate Tarapur nuke reprocessing unit next week Archived 9 October 2012 at the Wayback Machine. Business-standard.com. Retrieved 10 December 2011.

[GFMR2010-81] [80]
"Global Fissile Material Report 2010" (PDF). International Panel on Fissile Materials. Archived from the original (PDF) on 24 April 2020.

[82] [81]
"Tokai Reprocessing Plant (TRP)". Global Security. Archived from the original on 23 September 2020. Retrieved 30 July 2008.

[kramer2012-83] [82]
Kramer, D. (2012). "Is Japan ready to forgo nuclear reprocessing?". Physics Today. 65 (3): 25–42. Bibcode:2012PhT....65c..25K. doi:10.1063/PT.3.1469.

[wnn-20171228-84] [83]
"Further delay to completion of Rokkasho facilities". World Nuclear News. 28 December 2017. Archived from the original on 29 December 2017. Retrieved 28 December 2017.

[85] [84]
"Rawalpindi / Nilhore". Federation of American Scientists. Archived from the original on 4 March 2016.

[86] [85]
"Pakistan's Indigenous Nuclear Reactor Starts Up". The Nation. 13 April 1998.

[87] [86]
"Chelyabinsk-65". Global Security. Archived from the original on 3 September 2010. Retrieved 29 July 2008.

[88] [87]
S. Guardini; et al. (16 June 2003). "Modernization and Enhancement of NMAC at the Mayak RT-1 Plant". INMM. Archived from the original on 28 July 2014. Retrieved 9 August 2008.

[89] [88]
"Tomsk-7 / Seversk". Global Security. Archived from the original on 29 July 2020. Retrieved 1 June 2020.

[90] [89]
"Krasnoyarsk-26 / Zheleznogorsk". Global Security. Archived from the original on 31 July 2020. Retrieved 1 June 2020.

[91] [90]
"T Plant overview". Department of energy. Archived from the original on 18 March 2021. Retrieved 9 April 2011.

[Fernandez-92] [91]
LeVerne Fernandez. "Savannah River Site Canyons—Nimble Behemoths of the Atomic Age (WSRC-MS-2000-00061)" (PDF). Archived (PDF) from the original on 3 March 2016. Retrieved 9 April 2011.

[BFNP1995-93] [92]
Plutonium Consumption Program, CANDU Reactor Project: Feasibility of BNFP Site as MOX Fuel Supply Facility. Final report (Report). 30 June 1995. p. 3-1. doi:10.2172/82369.

[94] [93]
"West Valley Demonstration Project", Wikipedia, 1 December 2018, archived from the original on 25 January 2022, retrieved 13 April 2020

[47] radioisotope with a two year half life will retain 0.5^0.5 or over 70% of its power after a year - all those isotopes have half lives longer than two years and would thus retain even more power. Even if the yearly refueling window were to be missed, over half the power would still remain for the second refueling window

[95] Construction completed in 1976^[92]

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[8]

[9]

[10]

[11]

[12]

[13]

[14]

[15]

[16]

[17]

[18]

[19]

[20]

[21]

[22]

[23]

[24]

[25]

[26]

[27]

[28]

[29]

[30]

[31]

[32]

[33]

[34]

[35]

[36]

[37]

[38]

[39]

[40]

[41]

[42]

[43]

[44]

[45]

[46]

[a]

[47]

[48]

[49]

[50]

[51]

[52]

[53]

[54]

[55]

[56]

[57]

[58]

[59]

[60]

[61]

[62]

[63]

[64]

[65]

[66]

[67]

[68]

[69]

[70]

[71]

[72]

[73]

[74]

[75]

[76]

[77]

[78]

[79]

[80]

[81]

[82]

[83]

[84]

[85]

[86]

[87]

[88]

[89]

[90]

[91]

[92]

[93]

[b]

Water and organic solvents

PUREX

Modifications of PUREX

UREX

TRUEX

DIAMEX

SANEX

UNEX

Electrochemical and ion exchange methods

Obsolete methods

Bismuth phosphate

Hexone or REDOX

Butex, β,β'-dibutyoxydiethyl ether

Sodium acetate

Pyroprocessing

Advantages of pyroprocessing

Disadvantages of pyroprocessing

Electrolysis

PYRO-A and -B for IFR

Voloxidation

Advantages

Disadvantages

Volatilization in isolation

Advantages

Disadvantages

Fluoride volatility

Chloride volatility and solubility

Advantages of halogen volatility

Disadvantages of halogen volatility

Radioanalytical separations

Separated components and disposition

History

Separation technologies

Alternatives to PUREX

Economics

List of sites

See also

References

Notes

Further reading

External links