Forge burner

How to Build a Gas Forge Burner: First and Foremost, This burner was designed by Mr. Ron Reil. All credit for this design goes to him. Visit Ron Reil’s page at the link below: http://ronreil.abana.org/design1.shtml Also, Fire is Hot. A burner like this puts out a significant amou…

Is old Doc Frankenburner going to lower his standards? Not hardly! But a hot-rod can stand to do without fancy trimmings, as long as it screams, right? Thinking back over recent months, there has been a steady trickle of guys looking for a way to heat up every thing from a Two Brick forge to a co...

Here's my affiliate link to the High Pressure Regulator we Use!https://www.amazon.com/gp/product/B0033JF0GE/ref=as_li_qf_sp_asin_il_tl?ie=UTF8&tag=americanpi...

Brake Drum Forge - Beginning Blacksmithing: About a year ago I decided that I wanted to try blacksmithing. To me, It seemed like an amazing hobby to pick up. The shaping and forming of metal meant that I could make any tool that I would need for any project. It also allowed me to use metal li…

How to Build a Propane Forge Burner: In this Instructable I show how I was able to build a propane burner/torch from scratch using common plumbing fittings from Home Depot or hardware stores. The regulator might be the only part that you will need to source that might be harder to fin…

Part I: Building the Forge Burners A forge is just an insulated shell without a burner (or multiple forge burners in my case). So the first thing I did was set out on building the forge burners. I built them with parts from the plumbing aisle of my local big box hardware store. A rule of thumb

Gas propane burner for blacksmiths forge, furnace. Small. Air compressor fed.. A small gas burner for blacksmiths forge, furnace, foundry. 1 mm gas tip point. Large right angle Small right angle burners 1/4" air connector. Small burners here Large burners here. A small gas burner for blacksmiths forge, furnace, foundry. Images show gradient increase in air supply. Photos are with compressor air, not suitable for oxygen supply. All mild steel/brass parts, no zinc coating. Burns really well…

Dad bought the parts from Jay Hayes back in 2003. I found the shell and burners while cleaning out the barn. Figured it was time to finish it. Made the back side as a cap to make is easier install the Kaowool and to service later. For the doors i used a couple of cheap chipping hammers for the ha...

LSMIITTH Propane Forge Gas Burner，Blacksmith Knifemaking make. Our burners are work with high pressure : Butane, Propane, Butane + Propane Gas, LPG. It is 100,000 BTU. Powerful and efficient. There is a air choke on the top of our burner – it regulates the amount of air that is mixed with the propane during combustion,so you can get different quantity of air on different pressure. Gas Burner for Gas Forges and Metal Melting Furnaces, Efficient and Economical It is 100,000 BTU. Powerful and…

Really stupid blower type gas burner for forges built of iron pipe.