Airsoft Boneyard

This replica's pistol grip and receiver are held together with glue, suggesting that at some point the parts may have split apart or the screws/pins used to keep the frame together no longer retain. Glued body aside, the platform was fully functional in our testing, where we saw a 435 FPS average on 0.20g BBs, meaning you could pick this thing up and get skirmishing straight away!

Note that this platform is also painted in Two-Tone green, meaning a UKARA or other defence will not be required upon purchase.

It's unknown why this beautiful replica ended up in the Boneyard, and even in our testing we couldn't seem to find any problems. Shooting through our chronograph we were seeing a consistent 330 FPS using 0.20g BBs and it sounded perfectly healthy in delivering these shots. As well as being functional in our testing, it's also in incredible external condition, so you're essentially getting a brand new replica with a very generous discount!

Note that whilst we couldn't identify any issues with the platform in our testing, there will be a reason for it to have originally been sent to the Boneyard. Something faulty may become apparent later down the line, or it may not - the gamble is yours...

This SLR AK is in fantastic condition, and is fully functional! The only real problem with it is the tracer unit originally built into the HOP-up is no longer functional. Another slight change that this platform has seen is its top cover, which for unknown reasons has been switched or replaced with a railed one.

If you're wanting a unique platform that's ready to skirmish without any tinkering, you've struck gold in finding this one!

If you're looking for a cheap sniper that is also functional and has been serviced, this may be the one for you! This replica has found its way into our boneyard due to initial issues with the bolt coming loose however it's been repaired under warranty. Alongside this, the hop adjustment arm has fallen off but this was also repaired under the warranty service. Other than these major faults, the replica does have excess wear on the receiver and stock so it does need a bit of TLC to get it looking as good as it did when it was first bought! Running this replica through the chronograph, we were seeing 430 FPS +/- 10% on .2 BB's so this can be happily skirmished - although given how low it is from sniper limits, potentially a stronger spring might be in order to get the full potential out of this sniper with it being close/under DMR limits at some sites.

This KRISS® Vector Gas Blowback Airsoft Replica is in our Boneyard due to an issue with its HOP. No matter any adjustments made, the spread of this thing basically renders it unusable in-game. The platform also shows significant signs of use, with external wear visible across the entire thing. The original flash hider is missing, and has since been replaced with a standard birdcage.

The packaging for this replica is also nowhere to be seen, so you unfortunately won't have a KRYTAC box to add to your under-bed stash...

These CYMA/EMG CM.102 SGR-12 Tri-Shot Shotguns found their way to the Boneyard due to generally poor quality control. These are brand new guns, unused and never shot but we can make no guarantees of proper functionality. As with all Boneyard items, these do not have a warranty and are sold as spare parts, wall hangers or props.

For a detailed product description and more specifications, click HERE to view the original product.

These beautiful Real Wood AKM GBBRs are in the Boneyard due to their very slightly bent barrels. If you don't have an OCD, you won't even notice. There are two of these available, so make sure to tell your best mate that one of the biggest bargains in the history of Airsoft is available now at Patrol Base! We're sure they'll find it as hard to resist the triple combo of AK, Real Wood, and Gas Blowback just as much as you...

Note that there may be further issues with these platforms, but from our inspections, the only apparent issue is their slightly bent barrels as explained above. These are being sold as faulty Boneyard items, which are non-returnable and non-refundable. Please keep this in mind before purchasing.

This replica is suffering from efficiency issues. In testing, we could barely get through 10 rounds before the magazine vented and the replica had already begun sounding sluggish after just 5. Regardless, we were seeing an average of 280 FPS on 0.20g BBs, using ASG ULTRAIR 135 PSI Gas.

This replica was returned to us because of its downward bending handguard and barrel. Due to the nature of this issue, we advise that a replacement is fitted for both, as firing your replica forwards just for your BBs to land right in front of you doesn't sound too fun. Droop aside, shooting this through our chronograph presented us with a 340 FPS reading using 0.20g BBs, so you can skirmish this straight out of the box! But once again, we'd recommend that the drooping issue is resolved.

This GBBR was returned to us with a snapped charging handle, meaning racking the bolt will be quite difficult unless a Western Arms replacement is sourced. The magazine provided with the platform is also rather leaky, and tends to vent out when the replica is shot. Replacing this dysfunctional magazine is advisable. The replica shows some rather heavy external wear, with numerous marks and scratches across it's body. During testing, we measured an average of 330 FPS using 0.20g BBs and ASG ULTRAIR 135 PSI gas.

This replica has landed in our boneyard due to an issue regarding the entirety of the stock - it appears that it has split in half though is retained by a few surviving screws; due to this, one of the weights in the stock to balance the replica has fallen out and only one remains. Ultimately you don't need these weights unless you want a balanced replica as it's fully functional, firing at 345 FPS +/- 10% on .2 BB's when shooting it through our chronograph.

This replica has landed in our boneyard due to a fault revolving around the piston head getting jammed in the barrel and has been pulled out the cylinder ultimately rendering this replica non-functional. This ultimately could be an easy fix however given  the piston head got stuck in the barrel through normal use - there may be a potential QC issues regarding tolerances so even if you were to replace it, you still may end up having this issue regardless. The magazine is also missing so a replacement would have to be sourced in order to use this replica (we believe it's proprietary so you'll have to get magazines specifically designed for this replica) if it was to be fixed. The two-tone paint is also heavily worn across the handguard, especially around the magwell.

This shotgun's action is jammed up - when you are able to free this, regardless of what you do you cannot cock the spring to fire the replica. The feed ramp release linkage is also broken, so you cannot access the chamber of the replica in order to load a shell. Ultimately, this replica may be better suited as a wall hanger / display piece.

This replica has found its way into our boneyard due to its lack of willingness to cock. Someone very familiar with springers may be able to fix this issue like it's nothing, but as far we're concerned, it's non-functional. Due to the severity of the issue, we could not perform any tests, so we're unsure of any other potential issues it may have.

This replica is in the Boneyard as it doesn't work for unknown reasons. We have attempted to test it with several different batteries, but it just doesn't fire. This could be a good husk to pillage remaining functional parts from, or a prop for those wanting a MAC-10 in their collection - after all, the Two-Tone green means a UKARA or other defence will not be required upon purchase!

This replica is in the Boneyard as it doesn't work for unknown reasons. We have attempted to test it with several different batteries, but it just doesn't fire. This could be a good husk to pillage remaining functional parts from, or a prop for those wanting a MAC-10 in their collection - after all, the Two-Tone red means a UKARA or other defence will not be required upon purchase!

This replica is in the Boneyard as it doesn't work for unknown reasons. We have attempted to test it with several different batteries, but it just doesn't fire. This could be a good husk to pillage remaining functional parts from, or a prop for those wanting a MAC-10 in their collection.

This replica is in the Boneyard as it doesn't work for unknown reasons. We have attempted to test it with several different batteries, but it just doesn't fire. This could be a good husk to pillage remaining functional parts from, or a prop for those wanting a MAC-10 in their collection.

The rear of this pistol's slide is cracked - this shouldn't directly affect performance, though the take-down pin/slide lock and slide safety being missing do render the pistol non-functional. The grip safety also doesn't retain (see tape holding it together in images), however the safety itself alongside the leaf spring seem to be fine.

Note that the slide lock pin seen in the images is from another replica and was only used for imaging purposes. It is not included.

This replica is dead. We're unsure why this is exactly, but if you've got some quiet rainy evenings coming up this winter, maybe you can find out! There is a rip on the negative wire insulation, so this would be need to be repaired to avoid shorting the replica if it were to contact anything metallic. Another fault with this replica are the snapped front tabs on its upper receiver.

We recommend this iconic SMG replica serve as a wall-hanger, prop, or a husk to pull spare parts from.

This MAC-10 is dead. We have attempted to test it with several different batteries, but it simply won't fire. Without a further deep-dive into the platform, it's unknown to us exactly what's going on internally. This could be a good husk to pillage remaining functional parts from, or a prop for those wanting a MAC-10 in their collection - after all, the Two-Tone blue means a UKARA or other defence will not be required upon purchase!

This replica was returned to us with a cracked receiver. The crack is located towards the end of the receiver on the right side, and is significant enough to where the barrel assembly wobbles. We advise against using the replica as the damage is likely to worsen, and the rifle may break entirely. This thing would work better as a display piece or prop for the SVD fans out there...

This replica is in the Boneyard with a snapped receiver. It is unrepairable, so is recommended to those who could benefit from having some spare SVD parts...

This replica is in the Boneyard due to a stiff slide action. The trigger pull is also unusually hard, and we discovered that the provided magazine leaks. Quite a few problems that will need a good tinker to get sorted.

Note that this replica comes in a Pre Two-Tone blue, meaning a UKARA or other defence will not be required upon purchase.

A hop rubber in one of this shotgun's barrels is torn, ultimately freeing the associated barrel which has fallen out. This could be an easy fix and/or potential upgrade if the other 2 barrels get a fresh rubber too. The shotgun is still fully functional and in good external condition. It is however also missing the shells required to shoot though, so replacements for those would have to be sourced.

This replica has various external problems, the first of which is its loose upper handguard caused by the lack of a retaining pin. The pin to hold the dust cover in place is also missing, so both of these pieces of furniture will need replacement pins if you fancy having an ergonomically stable replica. The retaining latch for the folding stock is also rather sticky, so this will also need a look into if you intend to be regularly collapsing the platform.

Aside from those problems, the replica was fully functional in our testing - including the blowback mechanism! Firing into our chronograph gave us a 325 FPS average using 0.20g BBs, so you could quite happily skirmish this thing straight out of the box without much issue if new furniture/pins are sourced to stop the rattling.

This replica has been brought back to us with a sear issue. In conducting a field strip, we were unable to see excessive wear on any component including the blowback housing, suggesting internal damage within the trigger mechanism that will require further breakdown to take care of. During testing, for the shots that we managed to consistently shoot in semi by lightly tapping the trigger, we were seeing 275 FPS out of this pistol, meaning it'll be skirmish-ready once the sear issue is resolved.

This replica is in the Boneyard due to its missing magazine and rear iron sight. We cannot immediately identify any other faults and are unable to test functionality due to the lack of a magazine, though it is assumed to be working fine. It isn't in the best of external conditions, showing signs of previous use. A replacement magazine will need sourcing to get this thing shooting again.

Note that this replica comes in a Pre Two-Tone blue, this means a UKARA or other defence will not be required upon purchase.

This replica is in the Boneyard with a missing slide lock, a replacement of which will need to be sourced to get this pistol back in working order. Note that the magazine originally provided with this pistol is nowhere to be seen, so a replacement for that will be needed to get shooting too.

This pistol has a sticky slide. We attempted to use lubricant when testing, however this provided little to no benefit. Potential fixes may include a stronger recoil spring or shaving contact points where there appears to be high resistance. In testing, we were seeing an average of 150 FPS using 0.20g BBs and ASG ULTRAIR 135 PSI Gas, a result that unfortunately indicates that there may be more issues at play than just the sticky slide.