A. Usage of Feed Mill equipment
- Requesters who wish to use the Feed Mill equipment for grinding/milling of their own ingredients should complete the Feed Mill Request Form and indicate the type and amount of ingredients to be processed.
- The processing fee will be computed based on prevailing rates of power consumption, labor, equipment depreciation, and overhead cost (15 %).
- Milled ingredients will be released only upon full payment through SEAFDEC/AQD cashiering or by bank transfer to the SEAFDEC/AQD Bank of Commerce account 023-00-001593-8.
- Only authorized SEAFDEC/AQD staff will be allowed to operate the grinding and milling equipment.
B. Request for Feed Ingredients
- Requesters are required to fill-out the Feed Mill Request Form and indicate the type and amount of ingredients they need.
- Requesters should provide their own containers for: (a) dry ingredients weighing less than 25 kg, and (b) oils of any volume.
- The Feed Mill will only provide dry ingredients that pass through mesh #40 (~420 microns).
- Requested ingredients will be prepared and released only upon full payment through SEAFDEC/AQD cashiering or by bank transfer to the SEAFDEC/AQD Bank of Commerce account 023-00-001593-8.
C. Request for Extruded Feeds
- Requesters are required to fill out the Feed Mill Request Form and indicate the type, amount, and pellet size of extruded feeds.
- Feed Mill will only produce pellets with diameters of 2, 3, 6, and 9 mm for sinking feeds and at least 3 mm for floating feeds.
- Requested feeds will be prepared and released only upon full payment through SEAFDEC/AQD cashiering or by bank transfer to the SEAFDEC/AQD Bank of Commerce account 023-00-001593-8.
NOTES:
- Feed mill prepares feeds on a per order basis following a first-order-first-served scheme.
- Feeds are usually ready for pick-up two to three weeks upon receipt of confirmation of the order.
- Prices are computed based on the actual amount of ingredients used. The weight of the finished product may be less than the total weight of the ingredients by about 5 % due to losses during feed processing.
| Feed Mill: Products and Services Brochure Download here — File Size: 2.22 MB |