Nothing Special   »   [go: up one dir, main page]

Tle7 Ict

Download as pptx, pdf, or txt
Download as pptx, pdf, or txt
You are on page 1of 9

LESSON 2: SUB-TOPIC 3: Safety

Precautions When Working in


ICT Environments
Fire Safety Guideline
The 3 Major Objectives of Following
Safety Guidelines

Protect people from injury.


Protect equipment from damage.
Protect the environment from
contamination.
Safety Precautions when working in the Computer
Laboratory:

1. Always ground or discharge yourself


before touching any part of the computer.
2. Do not work alone so that there is
someone who can take care of you in
case of accident or emergency.
3. Be careful with the tools that may cause a
short circuit.
4. Always pull the cable
connector on the handle and not
hold on the cable itself.
5. Use only rubber shoes when
standing on the ground or on a
concrete floor.
6. Make sure that the pins are
properly aligned when
connecting a cable connector.
7. Always power off and unplug the
computer before working on it.
8. Take away any liquid such as mineral
water or soft drinks near your
working area or near computers.
9. Contingency measures during
workplace accidents, fire, and other
emergencies are recognized.
10. Personal protective equipment is
correctly used in accordance with
organization procedures and practice.
11. Hazard/risks in the workplace and their
corresponding indicators are identified to
minimize or eliminate risk to co‐workers,
workplace, and environment.
12. Take necessary precautions to protect
the component of the computer from
damage caused by Electrostatic Discharge
(ESD).
13. Hold the components by the
edges and do not touch the ICs.
14. Read and follow instructions in
the manual carefully.
15. Do not use excessive force if
things do not quite slip into place.

You might also like