Classification of Materials
Classification of Materials
Classification of Materials
Prof A. BALSUBRAMANIAN
CENTRE FOR ADVANCED STUDIES IN EARTH
SCIENCE
UNIVERSITY OF MYSORE
MYSORE-6
1
This module deals with the classification of the
engineering materials and their processing
techniques. The engineering materials can
broadly be classified as:
a) Ferrous Metals
b)Non-ferrous Metals (aluminum, magnesium,
copper, nickel, titanium)
c) Plastics (thermoplastics, thermosets)
d) Ceramics and Diamond
e) Composite Materials & f) Nano-materials.
2
The engineering materials are often primarily
selected based on their mechanical, physical,
chemical and manufacturing properties.
3
Metals :
Metals are usually lustrous, ductile, malleable,
and good conductors of electricity
They are divided into 2 categories:
A)FERROUS: the group which contains
mainly iron (Fe). Iron is the most important
metal in industrialized countries
B)NON-FERROUS: other metallic
materials containing no iron likecopper (Cu)
or
aluminium (Al)
4
Ferrous metals and alloys (irons, carbon
steels, alloy steels, stainless steels, tool and
die steels)
Nonferrous metals and alloys (aluminum,
copper, magnesium, nickel, titanium,
precious metals, refractory metals,
superalloys)
All the elements are broadly divided into metals
and non-metals according to their properties.
5
Metals are element substances which readily
give up electrons to form metallic bonds and
conduct electricity. Some of the important basic
properties of metals are:
(a)metals are usually good electrical and
thermal conductors,
(b)at ordinary temperature metals are usually
solid,
(c)to some extent metals are malleable and
ductile,
6
(d)the freshly cut surfaces of metals are
lustrous,
(e)when struck metal produce typical sound,
and
(f)most of the metals form alloys. When two or
more pure metals are melted together to form a
new metal whose properties are quite different
from those of original metals, it is called an
alloy.
7
Metallic materials possess specific properties
like plasticity and strength.
Few favourable characteristics of metallic
materials are high lustre, hardness, resistance to
corrosion, good thermal and electrical
conductivity, malleability, stiffness, the
property of magnetism, etc.
Metals may be magnetic, non-magnetic in
nature.
8
These properties of metallic materials are due
to:
(i)the atoms of which these metallic materials
are composed and
(ii)the way in which these atoms are arranged
in the space lattice.
Metallic materials are typically classified
according to their use in engineering as under:
Pure Metals and alloys.
9
Pure Metals:
Generally it is very difficult to obtain pure
metal. Usually, they are obtained by refining the
ore. Mostly, pure metals are not of any use to
the engineers. Materials in this group are
composed of one or more metallic elements
(such as iron, aluminum, copper, titanium,
gold, and nickel), and often also nonmetallic
elements (for example, carbon, nitrogen, and
oxygen) in relatively small amounts.
10
Atoms in metals and their alloys are arranged in
a very orderly manner and in comparison to the
ceramics and polymers, are relatively dense.
12
In addition, some of the metals (viz., Fe, Co,
and Ni) have desirable magnetic properties.
Metals
Normally metallic materials are combinations
of metallic elements. Metallic materials have
large number of nonlocalized electrons, i.e.
electrons are not bound to particular atoms.
Many properties of metals are directly
attributable to these electrons.
13
All metals are characterized by metallic
properties, e.g. luster, opacity, malleability,
ductility and electrical conductivity. Although
metals compose about three fourth of the known
elements but few find service in their pure
form.
15
Metallic materials are always crystalline in
nature. Scientists have developed amorphous
(non-crystalline) alloys by very rapid cooling of
a melt or by very high-energy mechanical
milling.
16
These are neither crystalline nor amorphous, but
form an ordered structure somewhere between
two known structures. These materials are
expected to exhibit far reaching electrical
properties.
Inorganic Materials
These materials include metals, clays, sand
rocks, gravels, minerals and ceramics and have
mineral origin.
17
These materials are formed due to natural
growth and development of living organisms
and are not biological materials.
Rocks are the units which form the crust of the
earth.
The three major groups of rocks are:
(i) Igneous Rocks: These rocks are formed by
the consolidation of semi-liquid of liquid
material (magma).
18
These are called as Plutonic if their
consolidation takes place deep within the earth
and volcanic if lava or magma solidifies on the
earth’s surface.
19
(ii) Sedimentary Rocks:
When broken down remains of existing rocks
are consolidated under pressure, then the rocks
are named as sedimentary rocks, e.g., shale and
sandstone rocks.
20
(iii) Metamorphic Rocks:
These rocks are basically sedimentary rocks
which are changed into new rocks by intense
heat and pressure, e.g., marble and slates. The
structure of these rocks is in between igneous
rocks and sedimentary rocks.
23
Rocks, stone, wood, copper, silver, gold etc. are
the naturally occurring materials exist in nature
in the form in which they are to be used.
24
Obviously, the study of engineering materials is
also related with the manufacturing process by
which the materials are produced to acquire the
properties as per requirement.
Biological Materials
26
Apart from these components a small amount of
gum, starch, resins, wax and organic acids are
also present in wood. One can classify wood as
soft wood and hard wood. Fresh wood contains
high percentage of water and to dry out it,
seasoning is done. If proper seasoning is not
done, defects such as cracks, twist, wrap etc.
may occur. Leather is obtained from the skin of
animals after cleaning and tanning operations.
27
Nowadays, it is used for making belts, boxes,
shoes, purses etc. To preserve the leather,
tanning is used.
30
Organic Materials
31
There are also some materials of biological
origin which do not possess organic
composition, e.g., limestone.
These materials are carbon compounds in
which carbon is chemically bonded with
hydrogen, oxygen and other non-metallic
substances. The structure of these compounds
is complex. Common organic materials are
plastics and synthetic rubbers which are termed
as organic polymers.
32
Other examples of organic materials
are wood, many types of waxes and petroleum
derivatives.
34
(b) Thermosetting plastics: These materials
cannot be resoftened after polymerisation, e.g.,
urea-formaldehyde,
phenol formaldehyde, etc. Due to cross-linking,
these materials are hard, tough, non-swelling
and brittle. These materials are ideal for
moulding and casting into components. They
have good corrosion resistance.
35
The excellent resistance to corrosion, ease of
fabrication into desired shape and size, fine
lusture, light weight, strength, rigidity have
established the polymeric materials and these
materials are fast replacing many metallic
components.
PVC (Polyvinyl Chloride) and polycarbonate
polymers are widely used for glazing, roofing
and cladding of buildings.
36
Plastics are also used for reducing weight of
mobile objects, e.g., cars, aircrafts and rockets.
Polypropylenes and polyethylene are used in
pipes and manufacturing of tanks.
37
Plastics are also used as main ingredients of
adhesives. The lower hardness of plastic
materials compared with other materials makes
them subjective to attack by insects and rodents.
38
These materials are used as thermal insulators
because of lower thermal conductivity.
Plastic materials have low modulus of
rigidity, which can be improved by addition
of filters, e.g., glass fibres.
Natural rubber, which is an organic material
of
biological origin, is an thermoplastic material. It
is prepared from a fluid, provided by the rubber
trees.
39
Rubber materials are widely used for tyres of
automobiles, insulation of metal
components, toys and other rubber products.
Polymers
Polymers include the familiar plastic and rubber
materials. Many of them are organic
compounds that are chemically based on
carbon, hydrogen, and other nonmetallic
elements (viz.O,N, and Si).
40
Furthermore, they have very large molecular
structures, often chain-like in nature that have a
backbone of carbon atoms.
Some of the common and familiar polymers are
polyethylene (PE),
nylon,
poly(vinyl chloride) (PVC),
polycarbonate (PC), polystyrene (PS), and
silicone rubber.
41
These materials typically have low densities ,
whereas their mechanical characteristics are
generally dissimilar to the metallic and ceramic
materials—they are not as stiff nor as strong
as these other material types.
44
Usually polymers are classified into three
categories: thermoplastic polymers,
thermosetting polymers and elastomers, better
called as rubbers.
Polymers have very large molecular structures.
Most plastic polymers are light in weight and
are soft in comparison to metals.
Polymer materials have typically low densities
and may be extremely flexible and widely used
as insulators, both thermal and electrical.
45
Typical examples of polymers are polyesters,
phenolics, polyethylene, nylon and rubber.
47
Ceramic materials
The word ceramic is derived from the Greek
word keramikos.
The term covers inorganic non -metallic
materials whose formation is due to the action
of heat Clays, bricks, cements, glass are the
most important ones. These are crystalline
compounds between metallic and non-metallic
elements. They are most frequently oxides,
nitrides and carbides.
48
Ceramics are compounds between metallic and
nonmetallic elements; they are most frequently
oxides, nitrides, and carbides.
For example, some of the common
ceramic materials include
aluminum oxide (or
alumina,Al2O3), silicon dioxide (or
silica, SiO2),
silicon carbide (SiC)& silicon
nitride (Si3N4).
49
In addition, some are referred to as the
traditional ceramics—those composed of clay
minerals (i.e., porcelain), as well as cement,
and glass.
51
With regard to optical characteristics, ceramics
may be transparent, translucent, or opaque, and
some of the oxide ceramics (e.g., Fe O )
exhibit magnetic behavior.
54
Composites
56
A composite is composed of two (or more)
individual materials, which come from the
categories discussed above—viz., metals,
ceramics, and polymers. The design goal of a
composite is to achieve a combination of
properties that is not displayed by any single
material, and also to incorporate the best
characteristics of each of the component
materials.
57
A large number of composite types exist that
are represented by different combinations of
metals, ceramics, and polymers. Furthermore,
some naturally-occurring materials are also
considered to be composites—for example,
wood and bone. However, most of those we
consider in our discussions are synthetic (or
man-made) composites.
58
One of the most common and familiar
composites is fiber-glass, in which small glass
fibers are embedded within a polymeric
material (normally an epoxy or polyester).
60
The CFRP composites are used in some aircraft
and aerospace applications, as well as high-
tech sporting equipment (e.g., bicycles, golf
clubs, tennis rackets, and skis/snowboards).
61
These materials as a class of engineering
material provide almost an unlimited potential
for higher strength, stiffness, and corrosion
resistance over the ‘pure’ material systems of
metals, ceramics and polymers.
62
Nowadays, the rapidly expanding field of nano
composites is generating many exciting new
materials with novel properties. The general
class of nano composite organic or inorganic
material is a fast growing field of research.
Significant efforts are going on to obtain
control
of nano composite materials depend not only on
the properties of their individual parents but
also on their morphology and interfacial
characteristics.
63
The lamellar class of intercalated organic/
inorganic nano composites and namely those
systems that exhibit electronic properties in at
least one of the composites offers the possibility
of obtaining well ordered systems some of
which may lead to unusual electrical and
mechanical properties.
64
Polymer-based nano composites are also being
developed for electronic applications such as
thin-film capacitors in integrated circuits and
solid polymer electrolytes for batteries.
No doubt, the field of nano composites is of
broad scientific interest with extremely
impressive technological promise.
Advanced Materials
67
These advanced materials are typically
traditional materials whose properties have been
enhanced, and, also newly developed, high-
performance materials.
68
Advanced materials include semiconductors,
biomaterials, and what we may term “materials
of the future” (that is, smart materials and
nanoengineered materials), which we discuss
below. The properties and applications of a
number of these advanced materials -for
example, materials that are used for lasers,
integrated circuits, magnetic information
storage, liquid crystal displays (LCDs), and
fiber optics.
69
These are new engineering materials which
exhibit high strength, great hardness, and
superior thermal, electrical, optical and
chemical properties.
Advanced materials have dramatically
altered
communication technologies, reshaped data
analysis, restructured medical devices,
advanced space travel and transformed
industrial production process.
70
These materials are often synthesized from the
biproducts of conventional commodity
materials and often possess following
characteristics:
•These materials are created for specific
purposes,
•These materials are highly processed and
possess a high value-to weight ratio,
71
•These materials are developed and replaced
with high frequency, and
•These materials are frequently combined into
new composites.
Nowadays, there is considerable interest in
making advanced materials that are
usually
graded by chemical composition, density or
coefficient of thermal expansion of material or
based on microstructural features, e.g. a
72
particular arrangement of second-phase
particles or fibres in a matrix.
73
Such gradual change will reduce the chances of
mechanical and thermal stresses, generally
present otherwise.
74
Semiconductors
These materials have electrical properties that
are intermediate between electrical conductors
and insulators.
Moreover, the electrical characteristics of
semiconducting materials are extremely
sensitive to the presence of minute
concentrations of impurity atoms; these
75
concentrations may be controlled over very
small spatial regions.
Silicon, Germanium and some more
compounds
form the vast majority of semiconducting
crystals.
77
Semiconductors have made possible the advent
of integrated circuitry that has totally
revolutionized the electronics and computer
industries (not to mention our lives) over the
past three decades.
These semiconducting materials are used in a
number of solid state devices, e.g. diodes,
transistors, photoelectric devices, solar
batteries, radiation detectors, thermistors and
lasers.
78
The semiconductors have made possible the
advent of integrated circuitary that has
completely revolutionized the electronics and
computer industries.
Biomaterials
Biomaterials are employed in components
implanted into the human body for replacement
of diseased or damaged body parts.These
materials must not produce toxic substances and
79
must be compatible with body tissues (i.e., must
not cause adverse biological reactions).
All of the above materials—metals, ceramics,
polymers, composites, and semiconductors—
may be used as biomaterials.
Some biomaterials that are utilized in artificial
hip replacements.
80
Materials of the Future: Smart Materials
Smart (or intelligent) materials are a group of
new and state-of-the-art materials now being
developed that will have a significant influence
on many of our technologies.
The adjective “smart” implies that these
materials are able to sense changes in their
environments and then respond to these changes
in predetermined manners traits that are also
found in living organisms.
81
In addition, this “smart” concept is being
extended to rather sophisticated systems that
consist of both smart and traditional materials.
function).
83
Shape memory alloys are metals that, after
having been deformed, revert back to their
original shapes when temperature is changed.
84
The behavior of magnetostrictive materials is
analogous to that of the piezoelectrics,
except that they are responsive to magnetic
fields.
Also, electrorheological and
magnetorheological fluids are liquids that
experience dramatic changes in viscosity upon
the application of electric and magnetic fields,
respectively.
85
Materials/devices employed as sensors include
optical fibers, piezoelectric materials (including
some polymers), and microelectromechanical
devices.
86
Piezoelectric sensors inserted into the blades
monitor blade stresses and deformations;
feedback signals from these sensors are fed into
a computer-controlled adaptive device, which
generates noise-canceling antinoise.
Smart or intelligent materials form a group of
new and state of art materials now being
developed that will have a significant influence
on many of present-day technologies.
87
The adjective ‘smart’ implies that these
materials are able to sense changes in their
environments and then respond to these changes
in predetermined manners—traits that are also
found in living organisms. In addition, the
concept of smart materials is being extended to
rather sophisticated systems that consist of both
smart and traditional materials.
88
The field of smart materials attempts to
combine the sensor (that detects an input
signal), actuator (that performs a responsive and
adaptive function) and the control circuit or as
one integrated unit.
Acutators may be called upon to change shape,
position, natural frequency, or mechanical
characteristics in response to changes in
temperature, electric fields, and or magnetic
fields.
89
Usually, four types of materials are commonly
used for actuators: shape memory alloys,
piezoelectric ceramics, magnetostrictive
materials, and electrorheological/
magnetorheological fluids. Shape memory
alloys are metals that, after having been
deformed, revert back to their original shapes
when temperature is changed.
90
Piezoelectric ceramics expand and contract in
response to an applied electric field (or
voltage); conversely these materials also
generate an electric field when their dimensions
are altered. The behaviour of magnetostrictive
materials is analogous to that of the
piezoelectric ceramic materials, except that they
are responsive to magnetic fields.
91
Also, electrorheological and
magnetorheological fluids are liquids that
experience dramatic changes in viscocity upon
application of electric and magnetic fields,
respectively. The combined system of sensor,
actuator and control circuit or as one IC unit,
emulates a biological system.
These are known as smart sensors, microsystem
technology (MST) or micromechanical
systems
(MEMS).
92
Materials/devices employed as sensors include
optical fibres, piezoelectric materials (including
some polymers) and MEMS.
93
Piezoelectric sensors inserted into the blades,
monitor blade stresses and deformations;
feedback signals from these sensors are fed into
a computer controlled adaptive device, which
generates noise cancelling antidose.
94
They generally consist of sensors that gather
environmental information such as
pressure, temperature, acceleration, etc.,
integrated electronics to process the data
collected and actuators to influence and
control the environment in the desired
manner.
96
Nano Materials
97
Usually, the clusters of atoms consisting of
typically hundreds to thousands on the
nanometer scale are called as nanoclusters.
These small group of atoms, in general, go by
different names such as nano particles,
nanocrystals, quantum dots and quantum boxes.
Significant work in being carried out in the
domain of nano-structured materials and nano
tubes since they were found to have potential
for high technology engineering applications.
98
Nano-structured materials exhibit properties
which are quite different from their bulk
properties. These materials contain a controlled
morphology with atleast one nano scale
dimension. Nano crystals, nano wires and nano
tubes of a large number of inorganic materials
have been synthesized and characterized in the
last few years.
99
Some of the nano materials exhibit properties of
potential technological value. This is
particularly true for nano-structures of
semiconducting materials such as metal
chalcogenides and nitrides.
The mixing of nano-particles with polymers to
form composite materials has been practiced for
decades.
100
For example, the clay reinforced resin known as
Bakelite is the first mass-produced polymer-
nanoparticle composites and fundamentally
transformed the nature of practical household
materials. Even before bakelite, nano
composites were finding applications in the
form of nano particle-toughened automobile
tires prepared by blending carbon black, zinc
oxide, and/or magnesium sulfate particles with
vulcanized rubber.
101
Despite these early successes, the broad
scientific community was not galvanized by
nano composites until the early 1990s, when
reports revealed that adding mica to nylon
produced a five-fold increase in the yield and
tensile strength of the material.
Subsequent developments have further
contributed to the surging interest in polymer–
nano particle composites.
102
Nanoengineered Materials
104
This ability to carefully arrange atoms provides
opportunities to develop mechanical,
electrical, magnetic, and other properties that
are not otherwise possible.
111
Material scientists are interested in green
approaches, by entering the field of
environmental—biological science, by
developing environmentally friendly processing
techniques and by inventing more recyclable
materials.
112
The following table shows the properties of materials to be considered for different
applications:
Manufacturing Functional Cost considerations Operating
processes requirements parameters
Plasticity Strength Raw material Pressure
Malleability Hardness Processing Temperature
Ductility Rigidity Storage Flow
Machinability Toughness Manpower Type of material
Casting properties Thermal Special treatment Corrosion
conductivity requirements
Weldability Fatigue Inspection Environment
Heat Electrical treatment Packaging Protection from
fire
properties
Tooling Creep Inventory Weathering
Surface finish Aesthetic look Taxes and custom Biological effects
duty
113