Axle
Axle
Axle
Dead Axle
A dead axle is what that is not connected to
engine. It does not turn under its own power or
torque. It move only when vehicle is move due to
drive axle
Application & Function of Dead Axle1. It exist for load bearing purpose
2. It distribute weight of vehicle
3. Heavy transport vehicle contain multiple axle
4. Mostly dead axle contain high load bearing spring.
Drive Axle
A drive axle is what that is connected
to engine. Its working is that it move
or turn the vehicle. Its formation is in
such type that, it is split into 2
halves
FWD ---
RWD---
Construction
1.
2.
3.
4.
5.
Hub
CV Joints (Outer)
Drive Shaft
CV Joints (Inner)
Diffrential / Transaxle
HUB
Construction
Outer CV Joint
Allow wheel to move or revolve
while axle is rotating or
vehicle is turning at an angle.
Construction
Difference b/w
Torsional damper
It is a device which is used to absorb excess torque in shaft.
Working
we can understood the working in the way thatWhen the power is given by power shaft to pinion
gear to ring gear gear of differential then it
transmit the power individually to sun gear of
each halves shaft or drive shaft then this power is
transmitted through CV joint & pass to hub then
wheel.
By the use of this power or torque wheel start
rotating & vehicle is moving.
THANK YOU
SUBMITTED BY:1.AVINASH SINGH
TOMAR
2.NIMESH AGRAWAL
3.UDDHAR OJHA
4.GOPAL SINGH TOMAR