Data Sheet: Thin Film Chip Resistors
Data Sheet: Thin Film Chip Resistors
Data Sheet: Thin Film Chip Resistors
Telecom L = ± 0.01%
P = ± 0.02%
Consumer
W = ± 0.05%
B = ± 0.1%
FEATURES C = ± 0.25%
Halogen Free Epoxy D = ± 0.5%
RoHS compliant F = ± 1%
Reducing environmentally (3) PACKAGING TYPE
hazardous wastes
R = Paper/PE taping reel K = Embossed taping reel
High component and
equipment reliability (4) TEMPERATURE COEFFICIENT OF RESISTANCE
Saving of PCB space A = 5 ppm/°C
None forbidden-materials used B = 10 ppm/°C
in products/production C = 15 ppm/°C
D = 25 ppm/°C
E = 50 ppm/°C
(5) TAPING REEL
www.yageo.com
Sep. 12, 2017 V.9
Product specification 3
9
Chip Resistor Surface Mount RT SERIES 0201 to 2512 (RoHS Compliant)
www.yageo.com
Sep. 12, 2017 V.9
Product specification 4
9
Chip Resistor Surface Mount RT SERIES 0201 to 2512 (RoHS Compliant)
MARKING
RT0201 / RT0402 / RESISTANCE VALUE IS NOT IN E-24 / E96 SERIES
No marking
Fig. 4
RT0603
E-24 series: exception values 10/11/13/15/20/75 of E -24 series, one short bar
563 under marking letter
Fig. 2 Value = 56 kΩ
For further marking information, please see special data sheet “Chip resistors marking”.
CONSTRUCTION
The resistors are constructed out of a high-grade ceramic OUTLINES
body. Internal metal electrodes are added at each end and
connected by a resistive layer. The resistive layer is adjusted For dimension see Table 1
DIMENSION
Table 1 For outlines see fig. 5
TYPE L (mm) W (mm) H (mm) I1 (mm) I2 (mm)
RT0201 0.60 ± 0.03 0.30 ± 0.03 0.23 ± 0.03 0.10 ± 0.05 0.15 ± 0.05
RT0402 1.00 ± 0.10 0.50 ± 0.05 0.30 ± 0.05 0.20 ± 0.10 0.25 ± 0.10
RT0603 1.60 ± 0.10 0.80 ± 0.10 0.45 ± 0.10 0.25 ± 0.15 0.25 ± 0.15
RT0805 2.00 ± 0.10 1.25 ± 0.10 0.50 ± 0.10 0.35 ± 0.20 0.35 ± 0.20
RT1206 3.10 ± 0.10 1.60 ± 0.10 0.55 ± 0.10 0.45 ± 0.20 0.40 ± 0.20
RT1210 3.10 ± 0.10 2.60 ± 0.15 0.55 ± 0.10 0.50 ± 0.20 0.50 ± 0.20 Fig. 5 Chip resistor outlines
RT2010 5.00 ± 0.10 2.50 ± 0.15 0.55 ± 0.10 0.60 ± 0.20 0.50 ± 0.20
RT2512 6.35 ± 0.10 3.20 ± 0.15 0.55 ± 0.10 0.60 ± 0.20 0.50 ± 0.20
www.yageo.com
Sep. 12, 2017 V.9
Product specification 5
9
Chip Resistor Surface Mount RT SERIES 0201 to 2512 (RoHS Compliant)
ELECTRICAL CHARACTERISTICS
Table 2
Operating Max. Max. Dielectric Resistance Range (E-24/E-96 series)(2) & Tolerance
Power Work T.C.R.
TYPE Temperature Overload Withstand
Rating (ppm/°C)
Range Vol. (1) Vol. Vol.
± 0.01% ± 0.02% ± 0.05% ± 0.1% ± 0.25% ± 0.5% ± 1.0%
± 50 --- --- --- 22 ~75K 22 ~75K 22 ~75K 22 ~75K
NOTE
1. The maximum working voltage that may be continuously applied to the resistor element, see “IEC publication 60115-8”
2. Value of E-192 series is on request
www.yageo.com
Sep. 12, 2017 V.9
Product specification 6
9
Chip Resistor Surface Mount RT SERIES 0201 to 2512 (RoHS Compliant)
NOTE
1. For Paper/Embossed tape and reel specification/dimensions, please see the special data sheet “Chip resistors packing”
FUNCTIONAL DESCRIPTION
POWER RATING
Each type rated power at 70°C:
RT0201=1/20W, RT0402=1/16W, RT0603=1/10W,
RT0805=1/8W, RT1206=1/4W, RT1210=1/4W,
RT2010=1/2W, RT2512=3/4W.
R ATED VOLTAGE
The DC or AC (rms) continuous working voltage
corresponding to the rated power is determined by
the following formula:
V= (PxR)
or max. working voltage whichever is less Fig. 6 Maximum dissipation (P) in percentage of rated power as a
function of the operating ambient temperature (T amb )
Where
V=Continuous rated DC or
AC (rms) working voltage (V)
P=Rated power (W)
R=Resistance value (Ω)
www.yageo.com
Sep. 12, 2017 V.9
Product specification 7
9
Chip Resistor Surface Mount RT SERIES 0201 to 2512 (RoHS Compliant)
Where
t1=+25 °C or specified room temperature
t2=–55 °C or +125 °C test temperature
R1=resistance at reference temperature in ohms
Life/Endurance IEC 60115-1 4.25.1 At 70± 5 °C for 1,000 hours, RCWV applied for ± (0.5%+0.05 Ω)
MIL-STD-202 Method 108A 1.5 hours on, 0.5 hour off, still air required
Moisture MIL-STD-202 Method 106G Each temperature / humidity cycle is defined at 8 ± (0.5%+0.05 Ω)
Resistance hours, 3 cycles / 24 hours for 10d. with 25 °C /
65 °C 95% R.H, without steps 7a & 7b,
unpowered
Parts mounted on test-boards, without
condensation on parts
Measurement at 24± 2 hours after
test conclusion
Humidity IEC 60115-1 4.24.2 Steady state for 1000 hours at 40 °C / 95% R.H. ± (0.5%+0.05 Ω)
(steady state)
RCWV applied for 1.5 hours on and
0.5 hour off
www.yageo.com
Sep. 12, 2017 V.9
Product specification 8
9
Chip Resistor Surface Mount RT SERIES 0201 to 2512 (RoHS Compliant)
Board Flex/ IEC 60115-1 4.33 Chips mounted on a 90mm glass epoxy resin ± (0.25%+0.05 Ω)
Bending PCB (FR4) No visible damage
Bending: see table 6 for each size
Bending time: 60± 5 seconds
Insulation Resistance IEC 60115-1 4.6 Rated continuous overload voltage (RCOV) ≥10 GΩ
for 1 minute
Details see below table 5
Dielectric Withstand IEC 60115-1 4.7 Maximum voltage (Vrms) applied for 1 minute No breakdown or flashover
Voltage
Solderability
Electrical Test not required Well tinned (≥95%
- Wetting J-STD-002 test B
Magnification 50X covered)
No visible damage
SMD conditions:
1st step: method B, aging 4 hours at 155°C
dry heat
2nd step: leadfree solder bath at 245± 3°C
Dipping time: 3± 0.5 seconds
- Leaching J-STD-002 test D Leadfree solder, 260 °C, 30 seconds No visible damage
immersion time
www.yageo.com
Sep. 12, 2017 V.9
Product specification 9
9
Chip Resistor Surface Mount RT SERIES 0201 to 2512 (RoHS Compliant)
REVISION HISTORY
REVISION DATE CHANGE NOTIFICATION DESCRIPTION
Version 9 Sep. 12, 2017 - - Add ± 0.02% tol. for 0402 to 1206
Version 7 Jan. 17, 2017 - - Add ± 0.01% tol. for 0402 to 1206
Version 3 Jul 11, 2008 - - Change to dual brand datasheet that describe RT0402 to RT2512 with
RoHS compliant
- Description of "Halogen Free Epoxy" added
- Define global part number
- Modify electrical characteristic
Version 2 Dec 26, 2005 - - New datasheet for thin film high precision - high stability chip resistors
sizes of 0201/0402/0603/0805/1206/1210/2010/2512, 1%, 0.5%, 0.25%,
0.1%, 0.05%, TC25/50 with lead-free terminations
- Replace the 0402 to 1210 parts of pdf files: TFx10_1_1, TFx11_.5_2,
TFx12_.25_2, TFx13_.1_3, TFx14_.05_1, TFx20_1_2, TFx21_.5_2,
TFx22_.25_2, TFx23_.1_2, TFx24_.05_1, and combine into a document.
- Test method and procedure updated
- PE tape added (paper tape will be replaced by PE tape)
“ Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any
product change will be announced by PCN.”
www.yageo.com
Sep. 12, 2017 V.9