Manufacturing Processes and Materials Exercises

ABS-M30
ABS-M30 is up to 25-70 percent stronger than standard Stratasys ABS and is an

ideal material for conceptual modeling, functional prototyping, manufacturing
tools, and end-use-parts. ABS-M30 has greater tensile, impact, and flexural
strength than standard ABS. Layer bonding is significantly stronger than that of
standard ABS, for a more durable part. This results in more realistic functional
tests and higher quality parts for end use. When combined with a Fortus 3D
Production System, ABS-M30 gives you Real Parts™ that are stronger,
smoother, and with better feature detail.
Mechanical Properties1 Test Method English Metric

Tensile Strength (Type 1, 0.125”, 0.2”/min) ASTM D638 5,200 psi 36 Mpa
Tensile Modulus (Type 1, 0.125”, 0.2”/min) ASTM D638 350,000 psi 2413 Mpa
Tensile Elongation (Type 1, 0.125”, 0.2”/min) ASTM D638 4% 4%
Flexural Strength (Method 1, 0.05”/min) ASTM D790 8,800 psi 61 Mpa
Flexural Modulus (Method 1, 0.05”/min) ASTM D790 336,000 psi 2317 Mpa
IZOD Impact, notched (Method A, 23°C) ASTM D256 2.6 ft-lb/in 139 J/m
IZOD Impact, un-notched (Method A, 23°C) ASTM D256 5.3 ft-lb/in 283 J/m
+/- .005 1st in.; +/- .001 +/- .127 1st cm; +/- .025
Typical achievable tolerance -
every in. after every cm after
Thermal Properties3 Test Method English Metric

Heat Deflection (HDT) @ 66 psi, 0.125" unannealed ASTM D648 204°F 110°C
Heat Deflection (HDT) @ 264 psi, 0.125" unannealed ASTM D648 180°F 96°C
Vicat Softening Temp. (Rate B/50) ASTM D1525 210°F 112°C
Coefficient of Thermal Expansion (flow) ASTM E831 4.9E -05 in/in/°F 8.82E-05 mm/mm/°C
Coefficient of Thermal Expansion (xflow) ASTM E381 4.7E -05 in/in/°F 8.46E-05 mm/mm/°C
Glass Transition Temp (Tg) DMA (SSYS) 226°F 108°C
2
Melt Point - Not Applicable Not Applicable2
Other3 Test Method Value → See reverse for color

Specific Gravity ASTM D792 1.04 options and system
Flame Classification UL94 HB (0.06", 1.5mm) availability.
Rockwell Hardness ASTM D785 110%
Dielectric Strength IEC60112 28.0 kV/mm
The information presented are typical values intended for reference and comparison purposes only. They should not be used for design specifi cations or quality control purposes. End-use material performance can be
impacted (+/-) by, but not limited to, part design, end-use conditions, test conditions, etc. Actual values will vary with build conditions. Tested parts were built on Fortus 400mc @ 0.010” (0.254 mm) slice. Product specifi
cations are subject to change without notice.
1
Build orientation is on side long edge. 2Due to amorphous nature, material does not display a melting point. 3Literature value unless otherwise noted.
ABS-M30
System Availability Layer Thickness Capacity Support Structure Available Colors

Fortus 360mc 0.010 inch (0.254 mm) Soluble Supports Ivory
Fortus 900mc 0.007 inch (0.178 mm) White
0.005 inch (0.127 mm) Black
Dark Grey
Red
Blue
At the core: Get your benchmark on the

Advanced FDM Technology Real Accuracy future of manufacturing
Fused Deposition Modeling (FDM) is Because thermoplastics are environmentally Low Cost. Accurate. High Strength. The best
the industry’s leading additive stable, part accuracy (or tolerance) doesn’t way to see the advantages of a FDM part is
manufacturing technology. FDM change with ambient conditions or time. to have your own model built on one of our
systems use a wide range (the largest This enables FDM parts to be among the many FDM systems. Get your parts at
choice of options in the industry) of most dimensionally accurate. www.growit3d.com.
thermoplastics with advanced
mechanical properties so your parts can
endure high heat, caustic chemicals,
sterilization, and high impact
applications.
About GROWit
GROWit™ is a privately held additive manufacturing company located in Irvine, California, dedicated to improving design through
engineering and rapid prototyping. We strive to be at the cutting edge, bringing both knowledge and resources directly to customers.
With our team of engineers, we help guide customers to the process that best suits their specific application, without holding a bias
to a specific platform or technology.
Why do we call ourselves GROWit? Due to the layer-by-layer nature of rapid prototyping, a part often looks like it is growing within
the machine – just like a plant grows from the ground. Rather than using the terms “building” or “fabricating”, the term “growing” is
commonly used within the industry; thus the origin of our name, GROWit.
GROWit
20918 Bake Parkway (p) 949 305 4004
Suite 106 (f) 949 305 4915
Lake Forest, CA www.growit3d.com
92630 sales@growit3d.com

Manufacturing Processes and Materials Exercises

Uploaded by

Copyright:

Available Formats

Manufacturing Processes and Materials Exercises

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Manufacturing Processes and Materials Exercises

Uploaded by

Copyright:

Available Formats

ABS-M30

ABS-M30 is up to 25-70 percent stronger than standard Stratasys ABS and is an

Mechanical Properties1 Test Method English Metric

Thermal Properties3 Test Method English Metric

Other3 Test Method Value → See reverse for color

System Availability Layer Thickness Capacity Support Structure Available Colors

At the core: Get your benchmark on the

You might also like