Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 99 views

    General Spec EG D16C5

    Uploaded by

    Yasin Noer Huda P
    Spec Engine

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    General Spec EG D16C5

    Uploaded by

    Yasin Noer Huda P
    99 views2 pages
    Spec Engine

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Spec Engine

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    99 views2 pages

    General Spec EG D16C5

    Uploaded by

    Yasin Noer Huda P
    Spec Engine

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    IMPACT 4.01.

    10 27/04/16

    Chassis ID Path
    A 781358 20/Specifications//General

    Model Identity
    FH (4) 132304043

    Publish date ID/Operation


    10/10/13

    General
    Note: As the illustrations in the service literature are used for several different engine variants, certain details may differ
    from the variant you are working with. The essential information in the illustrations is, however, always correct.

    Contents
    General
    Tightening torques

    General

    Type designation Max power output1 Max torque

    at 1450–1800 rpm for D16C 550 at 1000–1450 rpm for D16C 550
    and D16C 610 and D16C 610

    D16C 550 404 kW (550 hp) 2550 Nm

    D16C 610 449 kW (610 hp) 2800 Nm

    1
    Net output as per ISO 1585. Smoke requirements comply with ECE regulation 24 Federal Register and Swedish
    requirements.

    Number of cylinders.....6 

    Cylinder bore.....144 mm

    Stroke.....165 mm

    Swept volume.....16.1 dm³

    Firing order.....1-5-3-6-2-4

    Compression ratio.....17,0:1 

    Slow idling.....600 rpm

    Fast idling.....2200 rpm

    Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
    the Volvo Group
    The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.

    1/2
    IMPACT 4.01.10 27/04/16

    Maximum rotation speed.....1800 rpm

    Weight, engine (production engine without vehicle details).....1312 kg

    Maximum length.....1450 mm

    Maximum width.....870 mm

    Maximum height.....1290 mm

    Back to Contents.

    Tightening torques

    General tightening torques

    M6 standard bolt/nut 8.8.....10±1.5 Nm


    M8 standard bolt/nut 8.8.....24 ± 4 Nm
    M10 standard bolt/nut 8.8.....48±8 Nm 
    M12 standard bolt/nut 8.8.....85±15 Nm
    M14 standard bolt/nut 8.8.....140±25 Nm
    M16 standard bolt/nut 8.8.....220±35 Nm

    Only torque-tightened bolts can be refitted.

    Torque and angle tightened/yield limit tightened bolts:


    8.8.....shall not be reused
    10.9.....can be refitted
    12.9.....can be refitted

    Note: Check bolts before refitting. Damaged bolts, for example with cut marks on the underside, should be
    discarded.

    General tightening torques for clamping nuts

    pipe diameter 12 mm.....80±10 Nm


    pipe diameter 18 mm.....110 ±15 Nm
    pipe diameter 20 mm.....130 ±15 Nm
    pipe diameter 22 mm.....170 ±20 Nm
    pipe diameter 28 mm.....200 ±20 Nm

    Back to Contents.

    Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
    the Volvo Group
    The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.

    2/2

    You might also like