Valve Selection Guide D 35
Valve Selection Guide D 35
Valve Selection Guide D 35
Ads by Google Steel Pipe Fittings Water Safety Flow Meter Slurry Valve Solar Water Heater
Resources, Tools and Basic Information for Engineering and Design of Technical Applications!
The suitability of a valve for a particular application is decided by the materials used in relation to the conveyed fluid as
well as its mechanical design. The table below can be used as a valve selection guide.
http://www.engineeringtoolbox.com/valve-selection-guide-d_35.html 09.09.2009
Valve Selection Guide Page 2 of 3
On/Off, Diaphragm
Fibrous Suspensions Control valve, Squeeze
modulating Pinch
Gate
Globe
On/Off Rotary ball
Plug
Neutral Diaphragm
(Air, Steam etc) Globe
Needle
Control valve,
Butterfly
modulating
Diaphragm
Gate
Butterfly
Gas
Rotary ball
On/Off
Diaphragm
Corrosive Plug
(Acid vapors, chlorine
etc.) Butterfly
Control valve, Globe
modulating Needle
Diaphragm
Gate
Globe
Vacuum On/Off
Rotary ball
Butterfly
On/Off, Pinch
Abrasive Powder
Control valve, Squeeze
(Silica, etc)
modulating Spiral sock
Solids Pinch
On/Off, Gate
Lubricating powder
Control valve,
(graphite, talcum, etc Spiral sock
modulating
Squeeze
Sponsored Links
Metso's automation Ball Valves-IMT ARMATUREN Free Pipe Marking Book
Smart solutions for valve controlling Valves for heating, sanitary, gas and Comprehensive pipe marking best
www.metso.com industrial application practices guide. Get your copy free
www.imt-ch.com DuraLabel.com
Related Topics
z Piping Systems Dimensions of pipes and tubes - dimensions, materials, capacities - pressure drop calculations
and charts - insulation and heat loss diagrams
Related Documents
z Flow Coefficients - Cv - and Flow Factors - Kv - of Weir Diaphragm Valves Typical flow coefficients - Cv - and flow
factors - Kv - of weir diaphragm valves of "Saunders" type
z Diaphragm Materials in Diaphragm Valves Typical diaphragm materials and their main properties for use in
diaphragm valves
z Slurry Transport and Minimum Flow Velocity Settling of solids in slurry transport pipes or tubes can be avoided
with flow velocities above certain levels
http://www.engineeringtoolbox.com/valve-selection-guide-d_35.html 09.09.2009