Armor Steel Brochure PDF
Armor Steel Brochure PDF
Armor Steel Brochure PDF
com
DEMAND MORE
FROM YOUR
PROTECTION
STEELS
This ultimate combination is achieved with our unique production process, which also
guarantees a high, unchanging level of quality.
Superior surface quality
through direct quenching
Our perfected manufacturing process includes a unique method of
quenching that guarantees superior surface quality. In addition to
hardness and strength, direct quenching is essential in creating enhanced
uniformity, formability, flatness, and dimensional accuracy.
Blast protection and ballistic resistance
Ramor is a guarantee of reliability and a high grade of professionalism. We take pride in the services
we provide for all our hot-rolled steel products: guaranteed availability, tailored production on order,
and direct delivery straight from our factory.
Ruukki is an expert in metal, with over 50 years of experience. We understand the individual needs of
our clients and put effort into fulfilling them. Our material expertise is a significant benefit in realizing
your design, from the drawing board to end product implementation.
One factory, one responsibility
The product is available when you need it, in the condition of your preference.
We are known for utmost punctuality and a seamless, straightforward way of
operating. Simply put, your order is our priority.
All statements as to the properties and utilization Guarantees in respect of existence of certain
of materials and products mentioned in this data properties or utilization of material mentioned
sheet are for the purpose of description only. are valid only if agreed upon writing.
Table 2
Typical mechanical properties Ramor® 400, 500, 550. Guaranteed values Ramor® 450
Ruukki Yield strength Tensile strength Elongation Hardness Impact strength All directions
Ramor Re MPa Rm MPa As % HBW t °C Charpy V J
Ramor 400 1100 1300 8 360-450 -40°C 20J
Ramor 450 1100 1280 9 420-480 -40°C 35J
Ramor 500 1450 1700 7 480-560 -40°C 20J
Ramor 550 1550 1850 7 540-600 -40°C 16J
The typical impact strength values are results of pieces correspond with the plate thickness and
the Charpy V impact tests in accordance with EN the impact strength values decrease in direct
10045-1. The value 20 J means tests carried out relation to the surface are of the test piece.
with 10 x 10 standard test pieces. When testing
thicknesses less than 10 mm, the width of the test
Table 3
Thickness and thickness tolerances (lower tolerances = 0.00)
Ruukki Metals Oy, Suolakivenkatu 1, FI-00810 Helsinki, Finland, +358 20 5911, www.ruukki.com
Copyright© 2014 Rautaruukki Corporation. All rights reserved. Ruukki, Rautaruukki, Living. Working. Moving. and Ruukki’s
product names are trademarks or registered trademarks of Rautaruukki Corporation.