Sproces
Sproces
Sproces
CHOPPER PUMPS
SUBMERSIBLE
MIXERS
Silage of fish waste
in process tank
Fish waste in mixing tank: Silage mass after cutting and mixing with
the pump:
The pump is an integral part of the tank. The inlet opening in the pump casing is thus as
even with the tank bottom as possible. This design ensures that what enters the tank will
also get through the knife system and the pump. The bottom valve ensures that the tank
can be cleaned and emptied completely.
Complete solutions for mixing and
homogenization of fish silage in
storage tanks
Landia has many years of experience within the field of mixing and homogenization of
fish silage. Our engineers will design customized solutions which are based on short
and heavy mixing. At the same time the power consumption and the wear of the
mixer will be kept at a minimum.
The sealing system of the Landia mixers applied for the mixing of fish silage consists of
lip seals, wear bushes and a grease chamber against the medium, as well as a mechani-
cal seal between the grease chamber and the motor. Thus maximum resistance in
connection with the harsh operating conditions is ensured.
Submersible
mixer
Type: POPR-I 300 rpm
Motor size: 1.1-18.5 kW
Please contact:
AK09A.C15 - 010703
Landia A/S
273 . Videbæk Bogtrykkeri . 97 17 11 22
Industrivej 2
DK-6940 Lem St.
Tel.: +45 97 34 12 44
Fax: +45 97 34 16 98
e-mail: info@landia.dk
www.landia.dk