Nothing Special   »   [go: up one dir, main page]

Seppic Simulsol

Download as pdf or txt
Download as pdf or txt
You are on page 1of 9
At a glance
Powered by AI
The text discusses Simulsol, a range of sugar lipids that can be used as surfactants in household and industrial cleaning products. It provides information on their properties, applications, and benefits compared to other surfactants.

Acid, alkaline and neutral cleansers are discussed. The text suggests selecting the appropriate cleanser based on the pH tolerance of the surface to be cleaned as well as the type of pollution.

Properties like foaming power, solubilizing effect, compatibility with electrolytes and polymers, low irritation, and biodegradability make Simulsol TM SL/AG range suitable for uses like degreasing, detergency, and as wetting or foaming agents across a range of pH levels.

Simulsol™ [SL & AS]

Sustainable Partners for HI&I

« Green Surface Active Agents »


Create Innovative & Trend Evolutions.
SIMULSOL™ [SL & AS range] :
Larger range of Sugar Lipids for all HI&I applications.

All sugar lipids SIMULSOL™ [SL & AS range]


are issued from Fisher reaction:

HO
H O

HO O

O R
HO
n

R : from C4H9 ;
C8-10H17-21 ;
Ciso11H23 ;
to C12-16H25-33 ; ...
With n= 1 – 1.5

2015 WARSAW HI&I INT’ CONF


Uses of Simulsol ™ SL/ AG range, acts as:
FEATURES BENEFITS

Low Environment Impact. - Bio souced Derivatives from renewable resources w/o food stuff competition.
- Rapidly and completly biodegradable under aerobic and anaerobic conditions.
- DID listed with favorable Ecotoxicological profiles.

Mildness. - Low skin irritation potentiel as soon as blended with other surfactants (like NaLES.)
- Low systemic toxicity.

High Foaming Power. - Similar to AES.


- Fine creamy foam structure. Better penetration of compounds during cleanings
- Stable foam even in presence of oily soils.
- Foaming power is almost independent of concentration.

No Cloud Point. - Stable Aquous solutions at high temperature.


- Ease of formulation and manufacturing of HI&I.

Low Critical Micelle Concentration - Similarity to anionics likeFAE .


(CMC). - Efficient and effective at a low concentration.
- Good solubility potentiel.

Minimized Gel Formation during Dilution - Ease to blend with other raw material with simple stiring equipment
in Water. - Permit to manufacturate differents technical formulations, in all HI&iI perimeter
- Ideal for manufacturing HI&I products concentrated to be dilute prior to application.
-. Easier dilution of HI&I concentrates in water.

High Solubiliser Effect - Enhance hydrotrope properties in high alkaline formulations


- Stabilise rich formulations with alkaline salts
- Improve stock stability of manufactures
- Improve dissolution .
- Binds tablet s together and works as release agent during washing cycle
- Lower the Krafft point of anionic ingredients
- Enhance sanitizing properties of quatrernium salts and wood cells penetration of fungicides .

Great and Unique Tolerance for High - Accept very high concentration of electrolytes such concentrated caustic, silicate and/or phosphate
Content of Electolytes degreaser formulations or liquid laundry formulations.
- Used in car care products fin cleansers outdoor indoor and polishes.

Synergism and Booster Effect - Fully compatible all surface active agents
- Increase and real booster properties of other surface active agents

Compatible with Plastics and Resins - Behavior near anionics ,


- Reducer stress cracking with different sensible polymers like acrylics, ABS,and Polycarbonates
mainly used in Aeronautic Industries (Permit to formulate safer deiceing products)

2015 WARSAW HI&I INT’ CONF


SIMULSOL™ [SL & AS range] :
Physico properties of Sugar Lipids for all HI&I applications

SL 4 AS48 SL 26 C SL 55W SL 7 G SL 8 SL 826 B 825 SL 10 SL 11W


SIMULSOL GRADE
C8-C10;
C4 C8 (2EH) C12-C16 C11;C 12-C16 C7 C8-C10 C8-C10 10 11
ALKYL CHAIN C12-C16

16.3 14.4 11.6 12.1 13.8 13.8 13 13.8 12.6 12.4


HLB
N/A 1105 80 105 5831.1 1530 131.5 5831.1 625 1350
CMC mg/l
SURF TENS @CMC
6970% 30.5 28.4 28.5 27.9 25.5 27 27.3 26.2 26
(dynes/ cm2)

2015 WARSAW HI&I INT’ CONF


- Solubilizer
- Hydrotrope
Uses Simulsol ™ [SL/As range] , acts as : - co-Surfactant
- co-Solvent

Simulsol™ SL 4 Simulsol ™ AS48 Simulsol ™ SL7G

2014 Pierre POTIER Price awarded by


Industry French Minister for
Solubilizer& co-Solvent Sustainable Development.
Hydrotrope.
co -surfactant . Bio based Hydrotrope
Non foaming
& Booster.
Facilitate solubilization of tablets Low foaming.
Low foaming and clarifier Acceptance high level of
in automatic machines ( dish & laundry)
Ideal for Alkaline formulas electrolytes and alkalinity;
High hydrophilic ,could replaced short
alcohols for reducing Flash point of Polyvalent
formulas Workability in all range of pH

Main uses : Clarifier for Cleansers Main uses : Low Foam Cleansers Main uses : Improves
the detergency properties.

2015 WARSAW HI&I INT’ CONF


Uses of Simulsol ™ [SL/AS range], acts as : - Degreasers
- Foam stability

Simulsol ™ SL 8 Simulsol ™ SL 10 Simulsol ™ SL 55

Detergency Efficient Degreaser Degreaser

& &

Solubiliser Wetting

Main uses : foaming cleansers Main uses :Degreasing power Main uses : foam multi purpose
(accept high fragrance level) and foaming cleansers surface cleansers for industries

2015 WARSAW HI&I INT’ CONF


Uses of Simulsol ™ [SL/AS range], acts as : - Wetting agent
- Foaming agent
- Emulsifier

Simulsol™ SL 11W Simulsol™ SL 826 Simulsol ™SL 26 C

.
.

Polyvalent Detergent Emulsifier &


Wetting agent Foaming agent foaming

Main uses : increase of wet ability Main uses :Degreaser & solubilizer Main uses :solubilizer and foamer
in multi purpose surface cleansers and foamer cleansers with cleansers with good emulsifying
emulsifying power power

2015 WARSAW HI&I INT’ CONF


Uses of Simulsol ™ SL/ AG range, acts as : - Low foam Wetting agent
- Foam Reducer agent
- Emulsifier
IN SPECIFIC BLENDS

Simulsol™ NW 523 Simulsol™ SLFR 520 Montaline™ AG1004

Detergent with low Foam control Wetting agent


foaming property co-Detergent

Main uses :Recommended Main uses :Recommended Main uses: Multi purpose
in all mechanical applications in all mechanical applications cleansers in acidic & oxidizing
Applications anti-scale remover

2015 WARSAW HI&I INT’ CONF


Uses of Simulsol ™ SL/ AG range,
in “ green” and innovative formulations.

SURFACE
to TREAT or CLEAN?
Chemical resistance or compatibility of
Metals: Al, SS.......... substrate?
Plastics (PU,ABS,...) With : pH – solvents-bactericides-insecticides-fungi....
Woods
Leathers
Fabrics &textiles
Paints and Varnishes
Ceramics...... Simulsol ™
SL/ AG range

Nature of pollutions?
Minerals or Organics or Micro-organisms?

NEUTRAL CLEANSERS
ACID CLEANSERS ALKALINE CLEANSERS

pH= 0 pH= 7 pH= 14


2015 WARSAW HI&I INT’ CONF

You might also like