Nothing Special   »   [go: up one dir, main page]

BEDINI Free Energy

Download as doc, pdf, or txt
Download as doc, pdf, or txt
You are on page 1of 6
At a glance
Powered by AI
The key takeaways are that Bedini has constructed a device that can charge discharged batteries using a process called 'free energy resonant coupling' which taps into the energy of vacuum fluctuations.

Bedini's device aims to provide a simple and affordable way to generate energy by tapping into the zero-point energy of the vacuum using resonance effects, with the goal of reducing home utility costs.

Bedini's device works by shocking an electrolytic battery like lead-acid at its resonant ionic frequency in order to couple the vacuum fluctuations to the charged particles in the battery, allowing energy to be extracted without fully discharging the driving battery.

BEDINI'S FREE ENERGY GENERATOR

FOREWORD
Imagine having a small D.C. electrical motor sitting on your
laboratory bench powered by a common 12 volt battery. Imagine
starting with a fully charged battery and connecting it to the
motor with no other power input. Obviously, the motor is going to
run off the battery, but by conventional thinking it will stop when
the battery runs down.
Impossible, you say. Not at all. That's precisely what I have done
and the motor is running now in my workshop.
It isn't running by the conventional wisdom of electrical physics. It
isn't running by the conventional rules of electric motors and
generators, but it is running.
It isn't something complex. It is pretty simple, once one gets the
hang of the basic idea.
It is running off the principles of electromagnetics that Nikola
Tesla discovered shortly before 1900 in his Colorado Springs
experiments. It is running off the fact that empty vacuum - pure
"emptiness", so to speak - is filled with rivers and oceans of
seething energy, just as Nikola Tesla pointed out.
It is running off the fact that vacuum space-time itself is nothing
but pure massless charge. That is, vcuum has a very high
electrostatic scalar potential - it is greatly stressed. To usefully
tap the enormous locked-in energy of that stress, all one has to
do is crack it sharply and tap the vacuum oscillations that result.
The best way to do that is to hit something resonant that is
imbedded in the vacuum, then tap the resonant stress of the
ringing of the vacuum itself
In other words, we can ring something at its resonant frequency
and, if that something is imbedded in the vacuum, we can tap off
the resonance in vacuum stress, without tapping energy directly
from the embedded system we rang into oscillation, So what we
really need is something that is deeply imbedded in the vacuum,
that is, something that can translate "vacuum" movement to
"mass" movement.
Well, all charged particles and ions are already imbedded in the
vacuum by their charged fluxes, so stressed oscillations - that is,
vacuum oscillations - can be converted into normal energy of
mass movement by charged particles or ions, if the system of
charged particles or ions is made to resonate in phase with our
tapping "potential". For our purpose, let's use a system of ions.
First we will need a big accumulator to hold a lot of the charged
ions in the system that we wish to shock into oscillation. We need
something that has a big capacitance and also contains a lot of
ions.
An ordinary battery filled with electrolyte fits the bill nicely. While
it is not commonly known, ordinary lead-acid storage batteries
have a resonant ionic frequency, usually in the range of from 1-6
MHz. All we have to do is shock-oscillate the ions in the
electrolyte at their resonant frequency and time our
"trigger"potential and "siphon" current correctly. Then if we keep
adding potential to trigger the system we can get all that
"potential" to translate into "free electrical energy".
Look at it this way. Conventionally "electrostatic scalar potential"
is composed of work or energy per column of charged particle
mass. So if we add potential alone, without the mass flow, to a
system of oscillating charged particles, we add "physical energy"
in the entire charged particle system. In other words, the
"potential" we add is converted directly into "ordinary energy" by
the imbedded ions in the system. If we are clever we don't have to
furnish any pushing energy to move pure potential around. (For
proof that this is possible, see Bearden's "Toward a New
Electromagnetics; Part IV; Vectors and Mechanisms Clarified",
Tesla Book Co,, 1983, Slide 19, page 43, and the accompanying
write-up, pages 10,11. Also see Y. Aharonov and V. Bohm,
"Significance of Electromagnetic Potentials in the Quantum
Theory", "Physical Review", Second Series, Vol. 115, No. 3, Aug 1,
1959, pages 485-491. On page 490 you will find that it's possible
to have a field-free region of space, and still have the potential
determine the physical properties of the system.)
Now this "free energy resonant coupling" can be done in a simple,
cheap system. You don't need big cyclotrons and huge
laboratories to do it; you can do it with ordinary D.C. motors,
batteries, controllers and trigger circuits.
And that's exactly what I have done. It's real. It works. It is
running now on my laboratory bench in prototype form.
But that's not all. I am also a humanitarian. I am concerned for
that little old widow lady at the end of the lane, stretching her
meager Social Security check as far as she can, shivering in the
cold winter and not daring to turn up her furnace because she
can't afford the frightful utility bills.
That's simply got to change and I may well be the fellow who
changes it. By openly releasing my work in this paper, I am
providing enough information for all the tinkerers and
independent inventors around the world to have at it. If I can get
a thousand of them to duplicate my device, it simply can't be
suppressed as so many others have been.
So here it is. I have deliberately written my paper for the tinkerer
and experimenter, not for the scientist. You must be careful, for
the device is a little tricky to adjust in and synchronize all the
resonances. You'll have to fiddle with it, but it will work. Keep at
it.
Also, we warn you not to play with this unless you know what you
are doing. The resonating battery electrolyte produces hydrogen,
and if you hit it too hard with a "voltage spike" you can get an
electrical spark inside the battery. If that happens, the battery
will explode, so don't mess with it unless you are qualified and
use the utmost caution.
But it does work. So all you experimenters and pioneers, now's
your chance. Have at it. Build it. Tinker with it. Fiddle it into
resonant operation. Then let's build this thing in quantity, sell it
widely, and get those home utilities down to where we can all
afford them - including the shivering little old lady at the end of
the lane.
And when we do, let's give men like me the credit and
appreciation they so richly deserve.

The Institute Of Electrical And Electronics Engineers, Inc


John C Bedini has constructed a laboratory model of a machine in
which output energy exceeds input. It consists of a lead-acid
battery which powers a small DC motor, which turns a magneto-
like dynamo, which provides output energy to an electronics
package, which in turn feeds timed (scalar?) pulses back to the
battery terminals for recharging. As a demonstration, Bedini then
removes the good battery and sequentially inserts fully
discharged, dead batteries. Each of the dead batteries eventually
receives a full charge. Stated differently, He starts with one good
battery and four discharged batteries. At the end of the
demonstration all five batteries are fully charged. This author has
personally visited Bedini's lab many times , in company with
technicians and professors of Physics and Electrical Engineering.
None of us has been able to fault Bedini's findings. Each of my
professorial friends, however, has requested that their names not
be used for attribution, the inference being that their respective
universities would not be understanding of heretical concepts.

You might also like