Technical Data Sheet: Super Glue
Technical Data Sheet: Super Glue
Technical Data Sheet: Super Glue
DESCRIPTION:
Loctite® Super Glue Professional has proven superior performance over ordinary super glues. It works
faster and holds stronger on more surfaces than ordinary instant adhesives thanks to a patented
additive. The liquid formula works well on a variety of porous and non-porous surfaces and close fitting
repairs. Loctite® Super Glue Professional’s super strength formula is ideal for heavy-duty projects and
repairs. It dries clear and sets without clamping. Loctite® Super Glue Professional is resistant to
moisture, most chemicals and freezing temperatures.
RECOMMENDED FOR:
Use for repairing figurines, costume jewelry, cameras, toys, metal car parts, wiper blades, rubber seals
and O-rings. Bonds leather, cork, paper, cardboard, wood, chipboard, fabric, metal, ceramic, rubber
and hard plastics such as Plexiglas®, polycarbonate, polystyrene and PVC.
Dries transparent….….………….…………………………..
Invisible repairs
No clamping required
Sets in seconds………….………..…………………………
Item # Package Size
Super strength formula…………….………………………Ideal for heavy duty projects and repairs
Carded
1365882 20 g
Bottle Precise application
Pin-point nozzle……………………………………………...
DIRECTIONS:
Tools Typically Required:
Tissue paper
Safety Precautions:
Well-ventilated area, gloves
Preparation:
Surfaces must be clean, dry and free from oil, wax and paint. Protect work area. Lightly roughen smooth surfaces for better adhesion. Pre-fit
parts to be joined.
Application:
Twist the cap counter clockwise from the nozzle and pull off. Apply the adhesive sparingly to one surface only using approximately one drop
per square inch of surface. Press surfaces together immediately. Hold in place for 5 to 30 seconds until bond sets. Do not reposition parts.
Clean tip of tube immediately after use with tissue and replace the cap by twisting clockwise. Leave parts undisturbed for at least 10 minutes for
increased strength. For full bond strength, leave parts to cure for 24 hours.
Clean-up
After cleaning, wet any tissue used for wiping off glue with water and dispose of. When cleaning up larger quantities of uncured adhesive, apply
water and allow to cure and then scrape up. Note this may result in damage to the surfaces. Cured adhesive may be cut away with caution
using a sharp blade, removed with acetone or with boiling water. Note: Acetone is highly flammable and may not be suitable for use on all
materials, test surface first. Follow manufacturer’s instructions.
Loctite® Super Glue Professional
Page 1 of 3
Revision: March 5, 2014
Supersedes: September 27, 2013
Ref. #: 158594
Bulk: 924089
WARNING! Contains Cyanoacrylate. Can cause severe eye injury. Bonds skin instantly.
May cause allergic skin reaction. Skin contact may cause burns. Use in a well ventilated
area. Avoid contact with skin and eyes. FIRST AID: In case of eye contact, flush with
water for 15 minutes, call a physician. For skin contact, flush with water. For ingestion, do
not induce vomiting, call a physician. If spilled on clothing, flush with large quantities of
water. KEEP OUT OF THE REACH OF CHILDREN.
Refer to the Material Safety Data Sheet (MSDS) for further information
DISCLAIMER
The information and recommendations contained herein are based on our research and are believed to be accurate, but no warranty, express or
implied, is made or should be inferred. Purchasers should test the products to determine acceptable quality and suitability for their own intended
use. Nothing contained herein shall be construed to imply the nonexistence of any relevant patents or to constitute a permission, inducement or
recommendation to practice any invention covered by any patent, without authority from the owner of the patent.
TECHNICAL DATA
Shelf Life: From date of manufacture (unopened): *Cure time is dependent upon the
Stored at 2-8°C: 21 months temperature, humidity and amount of
Stored at 20°C: 21 months adhesive used.
Time to achieve a shear strength of 14.5 psi (0.1 N/mm²) on various substrates at 72°F/50% RH
Steel (degreased) 20 to 45
Aluminum 2 to 10
Zinc Dichromate 10 to 30
Neoprene <5
ABS 1 to 2
PVC 3 to 10
Polycarbonate 5 to 10
Phenolic <2
Wood (Oak) 10 to 30
Wood (Pine) 10 to 20
Chipboard 5 to 10
Fabric 10 to 20
Leather 5 to 10
Shear Strength
Substrates
2
psi N/mm