C903IP Quick Installation
C903IP Quick Installation
C903IP Quick Installation
Wired/Wireless IP Camera
After this done, the icon “IP Camera Tool” will be displayed on desktop.
More Security, More Convenience
4. Sign in.
Click Sign In, then can get video on real-time.
More Security, More Convenience
If use IE browser to connect the camera for the 1st time, maybe there is no image displayed, there will be an
ActiveX prompt, please click the prompt and choose Run Add-on, refresh the IE interface, and login the
camera again, then will see live video.
If there is still no live video after run ActiveX, please try to enable the ActiveX options of IE security settings,
please do the follow steps:
1. Close the firewall of your computer.
2. Change the ActiveX settings, “IE” browser > “Tool” > “Internet Options” > “Security”> “Custom
Level” > “ActiveX control and Plug-ins”, all the ActiveX options set to be “Enable”: Especially:
Enable: Download unsigned ActiveX controls
More Security, More Convenience
In Addition: you can also click “start” menu->“Internet Explorer”, choose “Internet attributes “ to enter, or via
“Control Panel” ->“Internet Explorer”, enter to Security setting.
3. If there is still no image, please close your anti-virus software, and then try step 1 & 2 again.
You have to register an account firstly, keep the user, password, host, then fill in it.
Note: Only one DDNS can be chosen, for example, if you use manufacturer’s DDNS, the 3rd one
More Security, More Convenience
won’t work, if use the 3rd DDNS, the manufacturer’s one won’t work.
Make sure the “Subnet Mask”, “Gateway”, “DNS Server” is the same as your router.
TP-LINK:
(1) Login the router.
Fill the service port (except 80), IP address of the camera, then click Save
The port and IP address should be the same as Camera.
BELKIN:
(1) Login the router.
(2) Choose “Firewall”, select “Virtual Servers”
(3) Input the port (except 80) and IP address, then click save.
Note: The port and IP address should be the same as Camera.
DLINK:
(1) Login the router.
(2) Choose “Advanced”, select “Virtual Servers”
(3) Input the port, IP address, Protocol, then click save.
Note: The “public port” & “private port” should be the same as camera’s port, choose the protocol to be
“both”.
More Security, More Convenience
After all these 4 steps done, then you can use the DDNS freely, check the DDNS status from the camera as
below, and get the link of DDNS for internet view.
Step: “Login”>”System”>”Device Info”:
More Security, More Convenience
2. From router.
You can also get the WAN IP address from your router.
After these settings have been done, it will send an email to your mailbox to active this account.
5. Please login your email box, and open the active link you get by email, then it will go to the activate
page to get this account active.
You will get all the details of your DDNS, such as hostname, WAN IP address etc.
Thanks for your support and attention, for further operation details, please check the full version
user manual of our IP Cameras!