14/01/2017 787 Propulsion System

AERO Home Archive About AERO Contact Us Subscribe Search AERO Magazine

In This Issue: Download This Article (PDF - 586 KB)

QTR_03.12

AERO QTR_03.12

Enhancing Suppliers’
In-Service Support to
Airlines

787 Propulsion
System

Reducing Runway
Landing Overruns

New Process for

Component Removal
Reduction
The 787 Dreamliner is powered by new-generation
engines from GE and Rolls-Royce that offer improvements
Securing Airline in fuel consumption, noise, and emissions.
Information on the By Stephen F. Clark, Senior Technical Fellow, Propulsion Systems
Ground and in the Air
Engine manufacturers have
developed systems that
Download This Issue (PDF) represent nearly a two-
generation jump in technology.

The 787 uses new engines from GE and Rolls-Royce. Advances in engine technology are the biggest
contributor to the airplane’s overall fuel efficiency improvements. The new engines represent a two-generation
jump in technology over the 767.

This article gives an overview of the basic features of the 787 propulsion system, comparing it to the 767
system it replaces. The article focuses on how the design achieves fuel consumption, noise, and emissions
improvements and discusses operating and maintainability features as well as overall cost-of-ownership
reduction benefits.

THE EVOLUTION OF AIRPLANE ENGINES

Starting in 2002, Boeing’s analysis indicated a strong market demand for a twin-aisle airplane with 767-class
payload capability at significantly enhanced range. This finding was consistent with airline evolution from a hub-
and-spoke to a point-to-point operational model. Enabling enhanced range in this seat class demanded
significant advances in overall airplane design with a large portion of this burden given to the propulsion
system.

Boeing and engine manufacturers approached this challenge by improving fuel burn in three traditional
performance areas and introducing a significant architectural innovation (see fig. 1):

Higher propulsive efficiency through increased bypass ratio.

Higher engine thermal efficiency through increased overall pressure ratio and improved component
efficiencies.
Improved thrust-to-weight ratio through the application of advanced materials.
Introduction of a novel dual-use electrical power generation system that doubled as the engine start system.

Figure 1: 787 Engines

Comparison of GEnx-1B and Rolls-Royce Trent 1000 with a table that compares key characteristics of these engines to 767
engines.

http://www.boeing.com/commercial/aeromagazine/articles/2012_q3/2/ 1/7
14/01/2017 787 Propulsion System
GE GEnx-1B

Rolls-Royce Trent 1000

787 Engines: 767 Engines:

GEnx-1B GE CF6-80C2
Trent 1000 RR RB211-524G/H

Bypass Ratio ~10 ~5

Overall Pressure Ratio ~50 ~33

Thrust Class 53,000–74,000 lbf 53,000–63,000 lbf

Fan Diameter 111–112 in 86–93 in

Specific Fuel
15% lower Base
Consumption
Noise ICAO Chapter 4 ICAO Chapter 3

Emissions CAEP/8 (2014) CAEP/2

In addition to the improved fuel burn requirements, the 787 propulsion system also had to meet more stringent
noise and emissions requirements. Finally, in order to maximize the capital value of the airplane, Boeing
decided that the propulsion systems should be designed for full interchangeability between the two
engine types.

ELECTRICAL POWER SYSTEM

A principal foundation of the 787 architecture was the incorporation of the variable frequency starter generator
(VFSG) system (see fig. 2). The VFSG delivers many benefits:

Replaces the heritage bleed air system used to feed the airplane’s environmental control system, thereby
realizing direct weight savings through the elimination of relatively heavy bleed air components such as
regulation valves, ducting, and coolers.
Eliminates the energy loss of the bleed air system pre-cooler.
Eliminates the throttling losses of bleed air provided from discrete engine compression stages.
Eliminates the single-purpose air turbine starters and their associated oil system and maintenance.
Simplifies the auxiliary power unit (APU) design to be a shaft power-only machine.
Provides high flexibility with existing airport ground support infrastructure.
Is fully self-contained with its own lubrication system and the ability to be disconnected self-protectively,
manually or remotely, through flight deck controls.

Figure 2: Starter generator

http://www.boeing.com/commercial/aeromagazine/articles/2012_q3/2/ 2/7
14/01/2017 787 Propulsion System
The variable frequency starter generator delivers many benefits, including the replacement of the heritage bleed air system.

Variable Frequency Starter Generator

The 787 main electrical power generation and start system is a four-channel variable frequency system with
two 250 kVA VFSGs on each of the two main engines. The power from these generators is supplied to the
main load buses through generator feeders and generator circuit breakers (see fig. 3).

Figure 3: 787 Engine start system schematic—GEnx

The variable frequency starter generator is a six-pole machine within an aluminum housing driven directly from the main engine
gearbox. The generator is a brushless, three-phase, alternating current, and variable frequency synchronous machine. It has a
nominal rating of 235 volts alternating current (VAC), 250 kVA, three phases, and 360–800 Hz output.

Controlling each VFSG is a dedicated generator control unit (GCU). The GCU is a line replaceable unit (LRU)
housed inside the aft electrical equipment bay. The GCU’s principal function is to provide voltage regulation
and fault current limiting while in the generate mode. The GCU also supports the main engine start function.

Managing the power distribution between the VFSGs is the bus power control unit (BPCU). The BPCU
performs several functions:

Controls bus configuration and engine health monitoring.

Provides standby system control, generating source load management, and main and APU engine
horsepower load management.
Acts as the electrical power system communication gateway with other systems and flight deck.

Built-in redundancy in the BPCU enhances system reliability and operational flexibility.

http://www.boeing.com/commercial/aeromagazine/articles/2012_q3/2/ 3/7
14/01/2017 787 Propulsion System
The common motor start controllers (CMSCs) are used to control the VFSG start function and properly regulate
torque during the start sequence. Once the engine is started, the CMSC switches over to controlling the cabin
air compressors, thereby performing a second function.

The electric start system affords maximum flexibility from a variety of power sources: APU generators, external
power cart, and cross engine (opposite engine VFSGs). The VFSG system provides full maintenance
diagnostics for both the entire system and all LRUs.

ENGINE DESIGN HIGHLIGHTS

Both 787 engine manufacturers incorporated the latest technology offerings from their extensive research and
product maturation programs.

The GE engines:

Leverage the highly successful GE90 composite fan blades with the latest swept aerodynamics.
Incorporate an entirely new composite fan case for significant weight savings.
Field the enhanced twin annular pre-swirl combustion system that achieves significant emission reductions
while preserving low pattern factor for turbine durability as well as excellent re-light characteristics.
Introduce surface air-oil coolers to compactly reject the VFSG and engine oil heat.
Incorporate state-of-the-art titanium aluminide (Ti-Al) blades in the last two stages of the seven-stage low
pressure turbine. Ti-Al achieves significant weight savings over traditional nickel alloy.

The Rolls-Royce engines:

Incorporate the latest swept aero hollow-fan-blade technology evolved from the predecessor Trent 900
engine.
Utilize the proven benefit of the Trent three-spool engine architecture. In the case of the Trent 1000, the
three-spool design affords intermediate pressure power off-take with demonstrated benefits in engine
operability and fuel consumption.
Incorporate surface coolers for compact and efficient rejection of VFSG and engine oil heat.
Design the Trent 1000 with the latest computational fluid dynamics-enabled 3D aerodynamics for high
efficiency and low noise.
Allow power to be extracted for each VFSG through the second of the three engine shafts. This unique
solution using the Trent 1000 engine architecture brings with it lower engine idle speeds, which reduce fuel
burn and noise on the 787.

NEW NACELLE FEATURES IMPROVE ON LEGACY DESIGNS

The nacelle design (see fig. 4) maximizes composite and weight-saving materials to improve maintenance cost
and fuel burn. Highlights include:

A single-piece inlet barrel construction for low noise.

Lightweight composite fan cowls.
A proven translating sleeve thrust reverser system that utilizes compact state-of-the-art 5,000 pounds per
square inch (psi) hydraulic actuation.
Advanced titanium alloy exhaust system components.
A single-piece aft fairing.
Composite diagonal brace.
Advanced titanium alloy strut.

Figure 4: Nacelle design: expanded view

This view of the nacelle shows the inlet, fan cowls, thrust reverser, exhaust plug, and nozzle.

http://www.boeing.com/commercial/aeromagazine/articles/2012_q3/2/ 4/7
14/01/2017 787 Propulsion System

EXTENSIVE ENGINE AND FLIGHT TESTING

The 787 propulsion system was rigorously tested, both to achieve basic certification and to demonstrate full
service readiness and extended operations (ETOPS) capability when the 787 entered service (see fig. 5).

Figure 5: Engine test program

Intense engine development and 787 flight test programs contribute to the engines’ service readiness and durability.

Accumulated Experience at Entry into Service (EIS)

>12,000 >15,000 >4,800 >1,800

Engine Test Hours Engine Cycle Flight Test Hours Flights

http://www.boeing.com/commercial/aeromagazine/articles/2012_q3/2/ 5/7
14/01/2017 787 Propulsion System

The engine test program incorporated more than 20 dedicated test engines between the two engine
manufacturers. Beyond testing for basic engine certification, each engine type completed 3,000 cycles of
ETOPS flight testing. The engine test program was started far in advance of the Boeing flight test program.
Multiple flying test beds identified necessary modifications prior to the Boeing flight test program. A two-year,
six-airplane 787 flight test program led to type certification in August 2011 and entry into service in
October 2011.

FLIGHT DECK CONTROLS AND DISPLAYS

The 787 propulsion controls are designed for maximum commonality with the 777 architecture, while
incorporating the latest customer-driven improvements.

The cockpit provides engine-starting controls, forward and reverse thrust manual control, autothrottle control,
and engine-indicating and crew-alerting system (EICAS).

During normal operation of the airplane, the flight crew monitors engine data on the primary flight display (see
fig. 6). The display can be set to show the full normal display, both primary and secondary engine parameters,
or an abbreviated compact display with only primary parameters.

Figure 6: Flight deck displays

The flight deck displays can be set to show the full normal display with both primary and secondary engine parameters (left) or an
abbreviated compact display with only primary parameters (center). A normal display (right) shows the location of engine-
indicating and crew-alerting system (EICAS) messages.

Normal Display Compact Display Normal Display with Alerts

The normal display is the default display. The flight crew may select the compact display when both engines
are operating normally. When the compact display has been selected, the normal display appears if:

An engine is starting.
An engine has failed.
An engine is shut down.
http://www.boeing.com/commercial/aeromagazine/articles/2012_q3/2/ 6/7
14/01/2017 787 Propulsion System
A secondary parameter goes out of normal operating range.
The display is selected by the flight crew.

To the right of the engine parameter display on the EICAS primary display is the location for displaying flight
crew alerting messages. The text of warning, caution, and advisory messages is displayed to alert the flight
crew to non-normal conditions.

ENGINE HEALTH MANAGEMENT SYSTEM

The 787 propulsion system incorporates the latest generation of central maintenance and engine health
management systems.

Central maintenance system. Through centralized fault reporting, the 787 onboard maintenance system (OMS)
aids the airline mechanic in rapidly isolating faults and guiding the appropriate maintenance action (see fig. 7).
The OMS is an essential tool in maintaining rapid airplane turnaround rates and maximizing dispatchability.

Figure 7: Onboard maintenance system

The 787 onboard maintenance system helps mechanics rapidly isolate faults and guides appropriate maintenance action.

Engine health management system. Each engine manufacturer provides a dedicated engine health monitor
that has vibration monitoring and fan trim balancing functions and sophisticated engine parameter trending for
maintenance planning.

SUMMARY

The new-generation engines powering the 787 airplane offer operators improvements in fuel consumption,
noise, and emissions. Both GE and Rolls-Royce have developed advanced engine systems that deliver nearly
a two-generation jump in technology.

Back to top | Continue to next article

Boeing Home | Commercial Airplanes | Contact AERO | AERO Copyright © 2012 The Boeing Company. All rights reserved.

http://www.boeing.com/commercial/aeromagazine/articles/2012_q3/2/ 7/7