Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 19 views

    SK Driven Piles Flyer 8086042

    Uploaded by

    Raakze Movi
    Driven Piles

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    SK Driven Piles Flyer 8086042

    Uploaded by

    Raakze Movi
    19 views2 pages
    Driven Piles

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Driven Piles

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    19 views2 pages

    SK Driven Piles Flyer 8086042

    Uploaded by

    Raakze Movi
    Driven Piles

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    3M Scotchkote Coatings

    ™ ™

    for Driven Piles


    Driven piles are a total engineering solution. The design, installation and quality

    “Fusion bonded epoxy assurance that are part of each driven pile combine to eliminate guesswork and

    coatings have provided the produce a known, reliable and cost-effective product that can accommodate a

    most effective long-term wide variety of subsurface conditions.

    way to protect our marine Driven piles coated with 3M™ Scotchkote™ Fusion Bonded Epoxy are ideally suited
    facilities from the harsh salt for marine and other near-shore applications. This coating is very effective for not
    water environment,” said only pipe pile but also H and sheet pile components as well as for reinforcing steel.
    Paul Pottle formally with The coating system has proven to be very durable and damage to it by handling,
    the Maine Department of transportation or driving is relatively easy to repair and is normally localized at the
    Transportation. point of damage with little or no additional pull off.

    These photos courtesy of Prock Marine.

    3
    3M™ Scotchkote™ Fusion-Bonded Epoxy Coating 6233
    The 3M™ Scotchkote™ Fusion-Bonded Epoxy Coating 6233 is a one-part, heat curable thermosetting epoxy coating powder
    designed for corrosion protection.

    3M™ Scotchkote™ Fusion-Bonded Epoxy Coating 6233 Test Data


    Property Test Description Typical Value
    Impact ASTM G14 (modified)
    1/8 in. (3.2 mm) thick plate 160 in●lbs (18.1 J)
    3/8 in. (9.5 mm) thick plate 59 in●lbs (6.7 J)
    Cathodic Disbondment CAN/CSA-Z245.20-12.8
    48 hours, 1.5 volt, 3% NaCl 149°F/65°C 2.3 mm r
    28 day, 1.5 volt, 3% NaCl 73°F/23°C 2.5 mm r
    28 day, 1.5 volt, 3% NaCl 149°F/65°C 4.9 mm r
    Penetration ASTM G 17 0
    -40° to 200°F/-40°C to 93°C
    Thermal Shock -320° to 310°F/-195° to 154°C No visible effects
    Coated pipe 10 cycles

    3M™ Scotchkote™ Fusion-Bonded Epoxy Dual-Coating System 6352


    The 3M™ Scotchkote™ Fusion-Bonded Epoxy Dual-Coating System 6352 is a hard, mechanically strong top coating for all
    Scotchkite fusion-bonded epoxy corrosion protection coatings.

    3M™ Scotchkote™ Fusion-Bonded Epoxy Dual-Coating 6352 Test Data


    Property Test Description Typical Value
    Impact ASTM G14 (modified) 142 in●lbs (16 J)
    Except with 1”x1/2”x7” bars
    Hardness ASTM D 2240-97 Shore D, run on pucks 86
    ASTM D 2583-95 Barcol, run on pucks 50
    Gouge Resistance TISI with R33 bit 203 um/8 mils gouge depth
    30 kg load 279 um/11 mils gouge depth
    40 kg load 330 um/13 mils gouge depth
    50 kg load
    Abrasion Resistance ASTM D 4060 0.091 g loss
    CS17 1000 g wt
    5000 cycles
    Cathodic Disbondment 28 day, 1.5 volt, 3% NaCl 176°F/80°C 4.8 mm r 226N/6233

    3M and Scotchkote are trademarks of 3M Company.

    Important Notice
    All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not
    guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such
    use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no
    force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.

    Warranty; Limited Remedy; Limited Liability.


    Because conditions of product use are outside of our control and vary widely, the following is made in lieu of all express or implied warranties: this product will conform to 3M’s
    published product specifications and be free from defects in material and manufacture on the date of your purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT
    NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective upon your receipt, your exclusive
    remedy shall be, at 3M’s option, to replace the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any
    indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.

    Electrical Markets Division


    6801 River Place Blvd.
    Austin, TX 78726-9000
    800/722-6721 Please recycle. Printed in USA.
    Fax 877/601-1305 © 3M 2013. All rights reserved.
    www.3M.com/corrosion 80-6111-8604-2 Rev A

    You might also like