Volvo Wheel Loader: Steering System Hydraulic System Standard Equipment
Volvo Wheel Loader: Steering System Hydraulic System Standard Equipment
Volvo Wheel Loader: Steering System Hydraulic System Standard Equipment
Low-effort steering gives short work cycle times. Power- Open centre hydraulics with highly efficient vane pumps Engine Warning & monitoring lights: Brake System Hydraulic System
VOLVO WHEEL LOADER
L90C
Air cleaner, dry type, dual element, • engine oil pressure Wet, internal oil circulation cooled, Main valve, 3-Spool, pilot operated
efficient system provides good fuel economy, good directional allows precision control even at low rpm´s together with quick • engine coolant temperature
exhaust aspirated pre-cleaner disc brakes, 4-wheel, dual circuit Pilot valve, 3-spool
stability and smooth ride. movements thanks to the high capacity pumps. Coolant level, sight gauge • air cleaner restriction Brake system, secondary Vane pump
Engine intake manifold preheater • alternator malfunction Parking brake alarm Bucket lever detent
Steering system: Load-sensing hydrostatic articulated Pump: Vane pump fitted to a power take-off on the transmis- Muffler, spark arresting • working lights Bucket leveler, automatic with posi-
steering. sion. The pilot system is supplied from a combined pilot/brake • high beam driving lights tion indicator, adjustable
• direction indicator, hazard Cab boom lever detents
pump. Electrical System Warning flasher: ROPS (SAE J10400C) (ISO 3471), Boom kickout, automatic, adjustable
System supply: The steering system is supplied from a
24V – prewired for optional • transmission oil pressure FOPS (SAE J 231) (ISO 3449). Hydraulic control lever safety latch
separate steering pump. Valve: Double-acting 3-spool valve. The control valve is accessories • transmission oil temperature Acoustical lining Boom lowering system
actuated by a 3-spool pilot valve. Alternator, 24V, 60 A • brake system pressure Ashtray Hydraulic pressure test ports, Quick
Pump: Variable-flow axial piston pump. Battery disconnect switch • parking brake applied Cigarette lighter connect
Lift function: The valve has four functions: raise, hold, lower Fuel gauge Central warning (with buzzer): Door lockable (left side access) Hydraulic fluid level, sight gauge
Cylinders: Two double-acting cylinders. Hourmeter • engine oil pressure Heater/defroster/pressurizer
and float. Inductive/magnetic automatic boom kickout can be Hydraulic oil cooler
Horn, electric • engine coolant temperature 11 kW, 37 500 Btu/h with four
Steering cylinders ................................ 2 switched on and off and is adjustable to any position between Instrument panel with symbols (buzzer) speed blower fan
Bore .................................................... 70 mm maximum reach and full lift height. Lights: • transmission oil pressure Filtered air External Equipment
• driving (2 front), halogen • transmission oil temperature Floor mat Isolation mounts: cab, engine,
Piston rod diameter ......................... 40 mm Tilt function: The valve has three functions: rollback, hold and with high/low beam • brake system pressure Interior light gearbox
Stroke ................................................. 419 mm dump. Inductive/magnetic automatic bucket positioner that • parking lights Interior rearview mirror Lifting lugs
Relief pressure ..................................... 21 MPa • stop/tail combination Mirrors rearview (2), exterior Side panels, engine hood
can be switched on and off. (2 rear) Drivetrain Openable window, right-hand side Steering frame lock
Max. flow ................................................ 91 l / min Transmission: modulated with single
• turn signals with hazard Safety glass, tinted Vandalism lock, provison for:
Articulation ............................................ ± 40° Cylinders: Double-acting warning switch lever control, Automatic Power Seat belt (SAE J386) batteries, engine oil
• working lights, halogen Shift, and operator controlled Seat, heated, ergonomically desig-
Filter: Full-flow filtration through 20 µm (absolute) filter (2 front, 2 rear) declutch ned, suspension adjustable
cartridge. • instrument lighting Differentials: Storage compartment
Contronic Monitoring System, ECU • front 100 % hydraulic Sun visor
Neutral start feature differential lock Windshield wiper, front & rear
Vane pump Test function for warning & • rear, conventional Intermittent wiper, front
Relief pressure ..................................... 22,5 MPa monitoring lights Tires 20.5 R25* L2 Goodyear Cab access steps and handrails
Flow ..................................................... 202 l/min Fenders, front & rear with anti-skid-
at .......................................................... 10 MPa tape
and engine speed ............................ 35 r/s (2 100 r/min)
CAB Pilot system
Relief pressure .................................. 3,0 MPa
Care Cab with easy entry and wide door opening. Lined with Cycle times
sound-absorbent material. Sound- and vibration-suppressing Raise* .................................................. 5,5 s
suspension. Good all round visibility, large glass areas. Dump* ................................................. 1,9 s OPTIONAL EQUIPMENT (Standard in certain markets)
Curved windshield of laminated, green-tinted glass. Lower, empty ..................................... 2,3 s
Total cycle time ................................. 9,7 s Service and maintenance Shut down to idle at Hydraulic System Tires
Ergonomically located controls and instruments permit a
• high engine coolant temp Hydraulic control, 3rd function 20.5–25
comfortable operating position. * with load as per ISO 5998 and SAE J818
equipment • low engine oil pressure
Tool box Hydraulic control, 4th function 20.5 R25*
• high transm. oil temp Hydraulic single acting lifting
Instrumentation: All information important to the operator is Tool kit Parking brake applied and
Air pressure equipment function
readily visible in front of him. Cab display for Contronic transmission in forward or Boom Suspension System Protective Equipment
Anti-freeze container reverse (buzzer) Protective grids for front running
monitoring system. Wheel nut wrench kit Biodegradable hydraulic fluid
Hydraulic function 3rd, hydraulic light
hoses Protection guard radiator grille
Heater and defroster: Heating element with filtered fresh air Drivetrain Protective grids for rear working
Engine Forward and reverse switch Servo hoses for separate
and four-speed fan. Defroster outlets for all windows. Coolant filter attachment locking lights
Speed limiter, 3-speed version Window guards for side and rear
Extra fuel filter Limited-slip differentials, front/rear Attachment bracket with separate
Operator’s seat: Spring suspended, adjustable operator’s Cold starting aid, engine locking system window
seat with belt. The seat is mounted on a bracket on the rear coolant preheater (220V/1500 W) Windshield guard
Pre-cleaner, oil bath type Cab Fan protection
wall. The force from the belt is absorbed by the seat rails. External Equipment Protective grids for rear lights
Pre-cleaner, turbo type Installation kit for radio
Fenders, extended Bellyguard rear • Engine output SAE J1349: • Volvo transmission with • Care Cab – pressurized cab
Standards: Tested and approved according to the following LIFTARM SYSTEM Radiator, corrosion protected Hand throttle
Counterweight 1 APS II
standards: ROPS (ISO/CD 3471, SAE J1040), FOPS (ISO
Sliding ventilation window gross 118 kW (160 hp) with high comfort and safety
Counterweight 2
Electrical System Speedometer Attachments net 113 kW (153 hp) – 2nd generation Automatic
3449, SAE J231). Complies with ”Overhead guards for rider TP Linkage combines high breakout torque throughout the Air suspended operator's seat Fenders, axle mounted
• Contronic monitoring system
Reverse alarm (SAE J994) Drawbar with pin Buckets Power Shift with mode
lift trucks” (ISO 6055) and ”Operator Restraint System” (SAE working range with nearly exact parallel lift-arm action. These Retractable seat belt Fork equipment • Operating weight: 14,4–16,1 t
Attachment lights Air conditioner 8 kW, selector
J386). features together with high lift height and long reach make Working lights front, extra Material handling arm • Load-sensing steering system
Working lights rear, extra
Dual service brake pedals Other Equipment Timber grapples • Buckets: 2,2–7,0 m3 – optimises performance
the lift-arm system equally as good in bucket loading as in Armrest (left) Comfort Drive Control (CDC) Diagonal snow blade
Rotating beacon, amber with • Wet disc brakes • Pilot-operated working hydraulics
Emergency exits ................................... 2 work with fork attachments and material handling arms. Contronic display Slow moving vehicle emblem Broom
collapsible mount Cab filter for asbetos contaminated • Volvo high performance- – fully sealed oil-circulation
Sound level in cab Alternator, brushless Secondary steering Cutting edge, 3 pc reversible, bolt-on Optional Equipment
as per ISO 6396, Head lights assym. left
environment 50 km/h sign Bucket teeth, bolt-on low emission engine cooled
Lift cylinder ............................................ 2 Instructor seat
Jump-start connector (Nato) Fuel fill strainer Bucket spillguard – with excellent low rpm – outboard mounted • Hydraulic attachment bracket
max fan position ................................ 72 dBA Bore .................................................... 130 mm Noise reduction kit, cab Electro-hydraulic operated park Bale clamp
Light, registration plate Steering wheel, adjustable tilt, lugging performance
fan position 2 .................................... 69 dBA Piston rod diameter ......................... 70 mm brake Drum rotator • Torque Parallel Linkage
Side marker lights telescopic • Boom Suspension System
Ventilation .............................................. 10 m3/min Stroke ................................................. 710 mm Contronic display – meets all known exhaust – high breakout torque through
Windshield washer, front & rear
Heating capacity .................................. 11 kW (37 500 Btu/h) Tilt cylinder ............................................ 1 emission regulations for off- out the working range • Comfort Drive Control
Air conditioning (optional) ................. 8 kW (27 300 Btu/h) Bore .................................................... 190 mm road vehicles until 2002 – excellent parallel lift-arm
Under our policy of continuous product improvement, we reserve the right to change specifications and design
Piston rod diameter ......................... 90 mm without prior notice. The illustrations do not necessarily show the standard version of the machine. action
Stroke ................................................. 430 mm
General purpose
15 20 25 30 35 2,4 A
2.9 yd3
outboard mounted disc brakes. Transmission declutch during ~ 1,5 2,6 ~ 2,9
D 2 890 mm
ELECTRICAL SYSTEM braking can be preselected by a switch on the instrument Sand/Gravel ~ 105 ~ 1,9
~ 1,7
2,2
2,4
~ 2,3
~ 2,5 2,4 m3 2,6 2,4
panel. Brake performance test by the Contronic system. 3.1 yd3 E 1 310 mm
~ 1,6 2,6 ~ 2,7
Contronic monitoring system with complete information on Aggregate ~ 100 ~ 1,9 2,2 ~ 2,2 1 470 mm
Parking brake: Mechanically operated disc brake on front 2,6 m3 2,9 2,6 F
the status of the machine’s various systems is standard. ~ 1,8 2,4 ~ 2,4 20° I
axle input shaft. ~ 1,6 ~ 2,6
3.4 yd3 45°
Electrical system with circuit board is well protected by fuses. 2,6 G 2 610 mm
≤ 100
material
Rock ~ 1,7 2,2 ~ 2,2
Light-
Prepared for retrofitting of optional equipment. Secondary brake: Either of the service brake circuits or the 4,1m3 4,1 H 4 520 mm H
parking brake fullfills ISO/SAE safety requirements. The size of rock buckets is optimized for optimal penetration andfilling 5.4 yd3 K
Central warning: Central warning lamp for the following capability rather than the density of the material. I 6 260 mm
20° B
J
functions: engine oil pressure, engine coolant temperature Standards: The brake system complies with the requirements Bucket fill D
(with buzzer), hydraulic oil pressure in transmission, transmis- of ISO 3450, SAE J1473 110% 105% 100% 95% J 2 400 mm
sion oil temperature, brake pressure, parking brake (buzzer), F
K 2 590 mm
shut down to idle as standard. Number of discs/wheel ............................................... 1
Number of accumulators ............................................ 2 SUPPLEMENTAL OPERATING DATA L 1 990 mm
E
Voltage ................................................. 24 V Volume, each ............................................................. 1,0 l C
M 8 210 mm L
Batteries .............................................. 2x12 V Excluding Counterweight 2 G
Battery capacity ................................. 2x105 Ah counterweight 1 M
Alternator rating ................................. 1 680 W / 60 A
Starter-motor output ......................... 5,4 kW (7,3 hp) Operating weight kg –300 +500
Tipping Load, full turn kg –500
Counterweight 1 may be used in rehandling and material handling.
+800
General purpose
15 20 25 30 35 2,4 A
2.9 yd3
outboard mounted disc brakes. Transmission declutch during ~ 1,5 2,6 ~ 2,9
D 2 890 mm
ELECTRICAL SYSTEM braking can be preselected by a switch on the instrument Sand/Gravel ~ 105 ~ 1,9
~ 1,7
2,2
2,4
~ 2,3
~ 2,5 2,4 m3 2,6 2,4
panel. Brake performance test by the Contronic system. 3.1 yd3 E 1 310 mm
~ 1,6 2,6 ~ 2,7
Contronic monitoring system with complete information on Aggregate ~ 100 ~ 1,9 2,2 ~ 2,2 1 470 mm
Parking brake: Mechanically operated disc brake on front 2,6 m3 2,9 2,6 F
the status of the machine’s various systems is standard. ~ 1,8 2,4 ~ 2,4 20° I
axle input shaft. ~ 1,6 ~ 2,6
3.4 yd3 45°
Electrical system with circuit board is well protected by fuses. 2,6 G 2 610 mm
≤ 100
material
Rock ~ 1,7 2,2 ~ 2,2
Light-
Prepared for retrofitting of optional equipment. Secondary brake: Either of the service brake circuits or the 4,1m3 4,1 H 4 520 mm H
parking brake fullfills ISO/SAE safety requirements. The size of rock buckets is optimized for optimal penetration andfilling 5.4 yd3 K
Central warning: Central warning lamp for the following capability rather than the density of the material. I 6 260 mm
20° B
J
functions: engine oil pressure, engine coolant temperature Standards: The brake system complies with the requirements Bucket fill D
(with buzzer), hydraulic oil pressure in transmission, transmis- of ISO 3450, SAE J1473 110% 105% 100% 95% J 2 400 mm
sion oil temperature, brake pressure, parking brake (buzzer), F
K 2 590 mm
shut down to idle as standard. Number of discs/wheel ............................................... 1
Number of accumulators ............................................ 2 SUPPLEMENTAL OPERATING DATA L 1 990 mm
E
Voltage ................................................. 24 V Volume, each ............................................................. 1,0 l C
M 8 210 mm L
Batteries .............................................. 2x12 V Excluding Counterweight 2 G
Battery capacity ................................. 2x105 Ah counterweight 1 M
Alternator rating ................................. 1 680 W / 60 A
Starter-motor output ......................... 5,4 kW (7,3 hp) Operating weight kg –300 +500
Tipping Load, full turn kg –500
Counterweight 1 may be used in rehandling and material handling.
+800
General purpose
15 20 25 30 35 2,4 A
2.9 yd3
outboard mounted disc brakes. Transmission declutch during ~ 1,5 2,6 ~ 2,9
D 2 890 mm
ELECTRICAL SYSTEM braking can be preselected by a switch on the instrument Sand/Gravel ~ 105 ~ 1,9
~ 1,7
2,2
2,4
~ 2,3
~ 2,5 2,4 m3 2,6 2,4
panel. Brake performance test by the Contronic system. 3.1 yd3 E 1 310 mm
~ 1,6 2,6 ~ 2,7
Contronic monitoring system with complete information on Aggregate ~ 100 ~ 1,9 2,2 ~ 2,2 1 470 mm
Parking brake: Mechanically operated disc brake on front 2,6 m3 2,9 2,6 F
the status of the machine’s various systems is standard. ~ 1,8 2,4 ~ 2,4 20° I
axle input shaft. ~ 1,6 ~ 2,6
3.4 yd3 45°
Electrical system with circuit board is well protected by fuses. 2,6 G 2 610 mm
≤ 100
material
Rock ~ 1,7 2,2 ~ 2,2
Light-
Prepared for retrofitting of optional equipment. Secondary brake: Either of the service brake circuits or the 4,1m3 4,1 H 4 520 mm H
parking brake fullfills ISO/SAE safety requirements. The size of rock buckets is optimized for optimal penetration andfilling 5.4 yd3 K
Central warning: Central warning lamp for the following capability rather than the density of the material. I 6 260 mm
20° B
J
functions: engine oil pressure, engine coolant temperature Standards: The brake system complies with the requirements Bucket fill D
(with buzzer), hydraulic oil pressure in transmission, transmis- of ISO 3450, SAE J1473 110% 105% 100% 95% J 2 400 mm
sion oil temperature, brake pressure, parking brake (buzzer), F
K 2 590 mm
shut down to idle as standard. Number of discs/wheel ............................................... 1
Number of accumulators ............................................ 2 SUPPLEMENTAL OPERATING DATA L 1 990 mm
E
Voltage ................................................. 24 V Volume, each ............................................................. 1,0 l C
M 8 210 mm L
Batteries .............................................. 2x12 V Excluding Counterweight 2 G
Battery capacity ................................. 2x105 Ah counterweight 1 M
Alternator rating ................................. 1 680 W / 60 A
Starter-motor output ......................... 5,4 kW (7,3 hp) Operating weight kg –300 +500
Tipping Load, full turn kg –500
Counterweight 1 may be used in rehandling and material handling.
+800
L90C
Air cleaner, dry type, dual element, • engine oil pressure Wet, internal oil circulation cooled, Main valve, 3-Spool, pilot operated
efficient system provides good fuel economy, good directional allows precision control even at low rpm´s together with quick • engine coolant temperature
exhaust aspirated pre-cleaner disc brakes, 4-wheel, dual circuit Pilot valve, 3-spool
stability and smooth ride. movements thanks to the high capacity pumps. Coolant level, sight gauge • air cleaner restriction Brake system, secondary Vane pump
Engine intake manifold preheater • alternator malfunction Parking brake alarm Bucket lever detent
Steering system: Load-sensing hydrostatic articulated Pump: Vane pump fitted to a power take-off on the transmis- Muffler, spark arresting • working lights Bucket leveler, automatic with posi-
steering. sion. The pilot system is supplied from a combined pilot/brake • high beam driving lights tion indicator, adjustable
• direction indicator, hazard Cab boom lever detents
pump. Electrical System Warning flasher: ROPS (SAE J10400C) (ISO 3471), Boom kickout, automatic, adjustable
System supply: The steering system is supplied from a
24V – prewired for optional • transmission oil pressure FOPS (SAE J 231) (ISO 3449). Hydraulic control lever safety latch
separate steering pump. Valve: Double-acting 3-spool valve. The control valve is accessories • transmission oil temperature Acoustical lining Boom lowering system
actuated by a 3-spool pilot valve. Alternator, 24V, 60 A • brake system pressure Ashtray Hydraulic pressure test ports, Quick
Pump: Variable-flow axial piston pump. Battery disconnect switch • parking brake applied Cigarette lighter connect
Lift function: The valve has four functions: raise, hold, lower Fuel gauge Central warning (with buzzer): Door lockable (left side access) Hydraulic fluid level, sight gauge
Cylinders: Two double-acting cylinders. Hourmeter • engine oil pressure Heater/defroster/pressurizer
and float. Inductive/magnetic automatic boom kickout can be Hydraulic oil cooler
Horn, electric • engine coolant temperature 11 kW, 37 500 Btu/h with four
Steering cylinders ................................ 2 switched on and off and is adjustable to any position between Instrument panel with symbols (buzzer) speed blower fan
Bore .................................................... 70 mm maximum reach and full lift height. Lights: • transmission oil pressure Filtered air External Equipment
• driving (2 front), halogen • transmission oil temperature Floor mat Isolation mounts: cab, engine,
Piston rod diameter ......................... 40 mm Tilt function: The valve has three functions: rollback, hold and with high/low beam • brake system pressure Interior light gearbox
Stroke ................................................. 419 mm dump. Inductive/magnetic automatic bucket positioner that • parking lights Interior rearview mirror Lifting lugs
Relief pressure ..................................... 21 MPa • stop/tail combination Mirrors rearview (2), exterior Side panels, engine hood
can be switched on and off. (2 rear) Drivetrain Openable window, right-hand side Steering frame lock
Max. flow ................................................ 91 l / min Transmission: modulated with single
• turn signals with hazard Safety glass, tinted Vandalism lock, provison for:
Articulation ............................................ ± 40° Cylinders: Double-acting warning switch lever control, Automatic Power Seat belt (SAE J386) batteries, engine oil
• working lights, halogen Shift, and operator controlled Seat, heated, ergonomically desig-
Filter: Full-flow filtration through 20 µm (absolute) filter (2 front, 2 rear) declutch ned, suspension adjustable
cartridge. • instrument lighting Differentials: Storage compartment
Contronic Monitoring System, ECU • front 100 % hydraulic Sun visor
Neutral start feature differential lock Windshield wiper, front & rear
Vane pump Test function for warning & • rear, conventional Intermittent wiper, front
Relief pressure ..................................... 22,5 MPa monitoring lights Tires 20.5 R25* L2 Goodyear Cab access steps and handrails
Flow ..................................................... 202 l/min Fenders, front & rear with anti-skid-
at .......................................................... 10 MPa tape
and engine speed ............................ 35 r/s (2 100 r/min)
CAB Pilot system
Relief pressure .................................. 3,0 MPa
Care Cab with easy entry and wide door opening. Lined with Cycle times
sound-absorbent material. Sound- and vibration-suppressing Raise* .................................................. 5,5 s
suspension. Good all round visibility, large glass areas. Dump* ................................................. 1,9 s OPTIONAL EQUIPMENT (Standard in certain markets)
Curved windshield of laminated, green-tinted glass. Lower, empty ..................................... 2,3 s
Total cycle time ................................. 9,7 s Service and maintenance Shut down to idle at Hydraulic System Tires
Ergonomically located controls and instruments permit a
• high engine coolant temp Hydraulic control, 3rd function 20.5–25
comfortable operating position. * with load as per ISO 5998 and SAE J818
equipment • low engine oil pressure
Tool box Hydraulic control, 4th function 20.5 R25*
• high transm. oil temp Hydraulic single acting lifting
Instrumentation: All information important to the operator is Tool kit Parking brake applied and
Air pressure equipment function
readily visible in front of him. Cab display for Contronic transmission in forward or Boom Suspension System Protective Equipment
Anti-freeze container reverse (buzzer) Protective grids for front running
monitoring system. Wheel nut wrench kit Biodegradable hydraulic fluid
Hydraulic function 3rd, hydraulic light
hoses Protection guard radiator grille
Heater and defroster: Heating element with filtered fresh air Drivetrain Protective grids for rear working
Engine Forward and reverse switch Servo hoses for separate
and four-speed fan. Defroster outlets for all windows. Coolant filter attachment locking lights
Speed limiter, 3-speed version Window guards for side and rear
Extra fuel filter Limited-slip differentials, front/rear Attachment bracket with separate
Operator’s seat: Spring suspended, adjustable operator’s Cold starting aid, engine locking system window
seat with belt. The seat is mounted on a bracket on the rear coolant preheater (220V/1500 W) Windshield guard
Pre-cleaner, oil bath type Cab Fan protection
wall. The force from the belt is absorbed by the seat rails. External Equipment Protective grids for rear lights
Pre-cleaner, turbo type Installation kit for radio
Fenders, extended Bellyguard rear • Engine output SAE J1349: • Volvo transmission with • Care Cab – pressurized cab
Standards: Tested and approved according to the following LIFTARM SYSTEM Radiator, corrosion protected Hand throttle
Counterweight 1 APS II
standards: ROPS (ISO/CD 3471, SAE J1040), FOPS (ISO
Sliding ventilation window gross 118 kW (160 hp) with high comfort and safety
Counterweight 2
Electrical System Speedometer Attachments net 113 kW (153 hp) – 2nd generation Automatic
3449, SAE J231). Complies with ”Overhead guards for rider TP Linkage combines high breakout torque throughout the Air suspended operator's seat Fenders, axle mounted
• Contronic monitoring system
Reverse alarm (SAE J994) Drawbar with pin Buckets Power Shift with mode
lift trucks” (ISO 6055) and ”Operator Restraint System” (SAE working range with nearly exact parallel lift-arm action. These Retractable seat belt Fork equipment • Operating weight: 14,4–16,1 t
Attachment lights Air conditioner 8 kW, selector
J386). features together with high lift height and long reach make Working lights front, extra Material handling arm • Load-sensing steering system
Working lights rear, extra
Dual service brake pedals Other Equipment Timber grapples • Buckets: 2,2–7,0 m3 – optimises performance
the lift-arm system equally as good in bucket loading as in Armrest (left) Comfort Drive Control (CDC) Diagonal snow blade
Rotating beacon, amber with • Wet disc brakes • Pilot-operated working hydraulics
Emergency exits ................................... 2 work with fork attachments and material handling arms. Contronic display Slow moving vehicle emblem Broom
collapsible mount Cab filter for asbetos contaminated • Volvo high performance- – fully sealed oil-circulation
Sound level in cab Alternator, brushless Secondary steering Cutting edge, 3 pc reversible, bolt-on Optional Equipment
as per ISO 6396, Head lights assym. left
environment 50 km/h sign Bucket teeth, bolt-on low emission engine cooled
Lift cylinder ............................................ 2 Instructor seat
Jump-start connector (Nato) Fuel fill strainer Bucket spillguard – with excellent low rpm – outboard mounted • Hydraulic attachment bracket
max fan position ................................ 72 dBA Bore .................................................... 130 mm Noise reduction kit, cab Electro-hydraulic operated park Bale clamp
Light, registration plate Steering wheel, adjustable tilt, lugging performance
fan position 2 .................................... 69 dBA Piston rod diameter ......................... 70 mm brake Drum rotator • Torque Parallel Linkage
Side marker lights telescopic • Boom Suspension System
Ventilation .............................................. 10 m3/min Stroke ................................................. 710 mm Contronic display – meets all known exhaust – high breakout torque through
Windshield washer, front & rear
Heating capacity .................................. 11 kW (37 500 Btu/h) Tilt cylinder ............................................ 1 emission regulations for off- out the working range • Comfort Drive Control
Air conditioning (optional) ................. 8 kW (27 300 Btu/h) Bore .................................................... 190 mm road vehicles until 2002 – excellent parallel lift-arm
Under our policy of continuous product improvement, we reserve the right to change specifications and design
Piston rod diameter ......................... 90 mm without prior notice. The illustrations do not necessarily show the standard version of the machine. action
Stroke ................................................. 430 mm
L90C
Air cleaner, dry type, dual element, • engine oil pressure Wet, internal oil circulation cooled, Main valve, 3-Spool, pilot operated
efficient system provides good fuel economy, good directional allows precision control even at low rpm´s together with quick • engine coolant temperature
exhaust aspirated pre-cleaner disc brakes, 4-wheel, dual circuit Pilot valve, 3-spool
stability and smooth ride. movements thanks to the high capacity pumps. Coolant level, sight gauge • air cleaner restriction Brake system, secondary Vane pump
Engine intake manifold preheater • alternator malfunction Parking brake alarm Bucket lever detent
Steering system: Load-sensing hydrostatic articulated Pump: Vane pump fitted to a power take-off on the transmis- Muffler, spark arresting • working lights Bucket leveler, automatic with posi-
steering. sion. The pilot system is supplied from a combined pilot/brake • high beam driving lights tion indicator, adjustable
• direction indicator, hazard Cab boom lever detents
pump. Electrical System Warning flasher: ROPS (SAE J10400C) (ISO 3471), Boom kickout, automatic, adjustable
System supply: The steering system is supplied from a
24V – prewired for optional • transmission oil pressure FOPS (SAE J 231) (ISO 3449). Hydraulic control lever safety latch
separate steering pump. Valve: Double-acting 3-spool valve. The control valve is accessories • transmission oil temperature Acoustical lining Boom lowering system
actuated by a 3-spool pilot valve. Alternator, 24V, 60 A • brake system pressure Ashtray Hydraulic pressure test ports, Quick
Pump: Variable-flow axial piston pump. Battery disconnect switch • parking brake applied Cigarette lighter connect
Lift function: The valve has four functions: raise, hold, lower Fuel gauge Central warning (with buzzer): Door lockable (left side access) Hydraulic fluid level, sight gauge
Cylinders: Two double-acting cylinders. Hourmeter • engine oil pressure Heater/defroster/pressurizer
and float. Inductive/magnetic automatic boom kickout can be Hydraulic oil cooler
Horn, electric • engine coolant temperature 11 kW, 37 500 Btu/h with four
Steering cylinders ................................ 2 switched on and off and is adjustable to any position between Instrument panel with symbols (buzzer) speed blower fan
Bore .................................................... 70 mm maximum reach and full lift height. Lights: • transmission oil pressure Filtered air External Equipment
• driving (2 front), halogen • transmission oil temperature Floor mat Isolation mounts: cab, engine,
Piston rod diameter ......................... 40 mm Tilt function: The valve has three functions: rollback, hold and with high/low beam • brake system pressure Interior light gearbox
Stroke ................................................. 419 mm dump. Inductive/magnetic automatic bucket positioner that • parking lights Interior rearview mirror Lifting lugs
Relief pressure ..................................... 21 MPa • stop/tail combination Mirrors rearview (2), exterior Side panels, engine hood
can be switched on and off. (2 rear) Drivetrain Openable window, right-hand side Steering frame lock
Max. flow ................................................ 91 l / min Transmission: modulated with single
• turn signals with hazard Safety glass, tinted Vandalism lock, provison for:
Articulation ............................................ ± 40° Cylinders: Double-acting warning switch lever control, Automatic Power Seat belt (SAE J386) batteries, engine oil
• working lights, halogen Shift, and operator controlled Seat, heated, ergonomically desig-
Filter: Full-flow filtration through 20 µm (absolute) filter (2 front, 2 rear) declutch ned, suspension adjustable
cartridge. • instrument lighting Differentials: Storage compartment
Contronic Monitoring System, ECU • front 100 % hydraulic Sun visor
Neutral start feature differential lock Windshield wiper, front & rear
Vane pump Test function for warning & • rear, conventional Intermittent wiper, front
Relief pressure ..................................... 22,5 MPa monitoring lights Tires 20.5 R25* L2 Goodyear Cab access steps and handrails
Flow ..................................................... 202 l/min Fenders, front & rear with anti-skid-
at .......................................................... 10 MPa tape
and engine speed ............................ 35 r/s (2 100 r/min)
CAB Pilot system
Relief pressure .................................. 3,0 MPa
Care Cab with easy entry and wide door opening. Lined with Cycle times
sound-absorbent material. Sound- and vibration-suppressing Raise* .................................................. 5,5 s
suspension. Good all round visibility, large glass areas. Dump* ................................................. 1,9 s OPTIONAL EQUIPMENT (Standard in certain markets)
Curved windshield of laminated, green-tinted glass. Lower, empty ..................................... 2,3 s
Total cycle time ................................. 9,7 s Service and maintenance Shut down to idle at Hydraulic System Tires
Ergonomically located controls and instruments permit a
• high engine coolant temp Hydraulic control, 3rd function 20.5–25
comfortable operating position. * with load as per ISO 5998 and SAE J818
equipment • low engine oil pressure
Tool box Hydraulic control, 4th function 20.5 R25*
• high transm. oil temp Hydraulic single acting lifting
Instrumentation: All information important to the operator is Tool kit Parking brake applied and
Air pressure equipment function
readily visible in front of him. Cab display for Contronic transmission in forward or Boom Suspension System Protective Equipment
Anti-freeze container reverse (buzzer) Protective grids for front running
monitoring system. Wheel nut wrench kit Biodegradable hydraulic fluid
Hydraulic function 3rd, hydraulic light
hoses Protection guard radiator grille
Heater and defroster: Heating element with filtered fresh air Drivetrain Protective grids for rear working
Engine Forward and reverse switch Servo hoses for separate
and four-speed fan. Defroster outlets for all windows. Coolant filter attachment locking lights
Speed limiter, 3-speed version Window guards for side and rear
Extra fuel filter Limited-slip differentials, front/rear Attachment bracket with separate
Operator’s seat: Spring suspended, adjustable operator’s Cold starting aid, engine locking system window
seat with belt. The seat is mounted on a bracket on the rear coolant preheater (220V/1500 W) Windshield guard
Pre-cleaner, oil bath type Cab Fan protection
wall. The force from the belt is absorbed by the seat rails. External Equipment Protective grids for rear lights
Pre-cleaner, turbo type Installation kit for radio
Fenders, extended Bellyguard rear • Engine output SAE J1349: • Volvo transmission with • Care Cab – pressurized cab
Standards: Tested and approved according to the following LIFTARM SYSTEM Radiator, corrosion protected Hand throttle
Counterweight 1 APS II
standards: ROPS (ISO/CD 3471, SAE J1040), FOPS (ISO
Sliding ventilation window gross 118 kW (160 hp) with high comfort and safety
Counterweight 2
Electrical System Speedometer Attachments net 113 kW (153 hp) – 2nd generation Automatic
3449, SAE J231). Complies with ”Overhead guards for rider TP Linkage combines high breakout torque throughout the Air suspended operator's seat Fenders, axle mounted
• Contronic monitoring system
Reverse alarm (SAE J994) Drawbar with pin Buckets Power Shift with mode
lift trucks” (ISO 6055) and ”Operator Restraint System” (SAE working range with nearly exact parallel lift-arm action. These Retractable seat belt Fork equipment • Operating weight: 14,4–16,1 t
Attachment lights Air conditioner 8 kW, selector
J386). features together with high lift height and long reach make Working lights front, extra Material handling arm • Load-sensing steering system
Working lights rear, extra
Dual service brake pedals Other Equipment Timber grapples • Buckets: 2,2–7,0 m3 – optimises performance
the lift-arm system equally as good in bucket loading as in Armrest (left) Comfort Drive Control (CDC) Diagonal snow blade
Rotating beacon, amber with • Wet disc brakes • Pilot-operated working hydraulics
Emergency exits ................................... 2 work with fork attachments and material handling arms. Contronic display Slow moving vehicle emblem Broom
collapsible mount Cab filter for asbetos contaminated • Volvo high performance- – fully sealed oil-circulation
Sound level in cab Alternator, brushless Secondary steering Cutting edge, 3 pc reversible, bolt-on Optional Equipment
as per ISO 6396, Head lights assym. left
environment 50 km/h sign Bucket teeth, bolt-on low emission engine cooled
Lift cylinder ............................................ 2 Instructor seat
Jump-start connector (Nato) Fuel fill strainer Bucket spillguard – with excellent low rpm – outboard mounted • Hydraulic attachment bracket
max fan position ................................ 72 dBA Bore .................................................... 130 mm Noise reduction kit, cab Electro-hydraulic operated park Bale clamp
Light, registration plate Steering wheel, adjustable tilt, lugging performance
fan position 2 .................................... 69 dBA Piston rod diameter ......................... 70 mm brake Drum rotator • Torque Parallel Linkage
Side marker lights telescopic • Boom Suspension System
Ventilation .............................................. 10 m3/min Stroke ................................................. 710 mm Contronic display – meets all known exhaust – high breakout torque through
Windshield washer, front & rear
Heating capacity .................................. 11 kW (37 500 Btu/h) Tilt cylinder ............................................ 1 emission regulations for off- out the working range • Comfort Drive Control
Air conditioning (optional) ................. 8 kW (27 300 Btu/h) Bore .................................................... 190 mm road vehicles until 2002 – excellent parallel lift-arm
Under our policy of continuous product improvement, we reserve the right to change specifications and design
Piston rod diameter ......................... 90 mm without prior notice. The illustrations do not necessarily show the standard version of the machine. action
Stroke ................................................. 430 mm