www.1proline.

com
email:Bench@1proline.com

THE #1 MANUFACTURER OF WIRE HARNESS ASSEMBLY STATIONS

The EWH Electric Height Adjustable Wire Harness assembly benches are designed for the ergonomic assembly of wire
harnesses. The unit comes with a 72" x 36" platform capable of holding boards from 24" wide to 24" long up to 48" wide
x 96" long. The platform comes with an adjustable front rail that captivates boards from .250" thick to .750" thick. The
EWH features a 60 degree electric foot pedal operated tilt with 600 pounds capacity. When the EWH is fully tilted the
front edge of the board adjusts from 24.5" to 40.5" via foot pedal.
List
PART NO. DESCRIPTION Wgt.(lbs) Price
EWH7236 Wire harness table with a 72"L x x36" W platform to hold wire harness assembly
327 2,434
72"Lx36"W boards. With electric height adjustment and electric tilt.

Our EWH and MWH Wire Harness benches also ship as part
of our “Bench in a Box”Series. Each bench is packaged
individually with it’s own set of assembly instructions,
hardware kit and harness bench.

Use Part # BIB21 for MWH7236

Bar coded inventory for your warehouse.
With the bench in a box series you can easily inventory the units until you need them. Use Part # BIB22 for EWH7236
The bench in the box series has each bench packaged separately and complete.
Pre-kitted units take the guess work out of configuring the bench you need.
Wire Harness Station 84" long x 42" deep when 3" high front and rear lip are
flat. Solid Maple Work surface pivots up to 90 degrees locks in five
positions. Work surface adjusts via pull pin from 32" to 44" high in 4"
increments when in the flat position. Horizontal leg slides in 7" on either
side for storage.

THE #1 MANUFACTURER OF WIRE HARNESS ASSEMBLY STATIONS

List
PART NO. DESCRIPTION Wgt.(lbs) Price
WH8442/SK Wire harness table with a 84"L x 42" deep platform to hold wire harness assembly
286 2,434
84"Lx42"Deep boards. With manual tilt and manual pull pin height adjustment. 3” folding lip front and rear

The FLWH4880 Allows you to

adjust the surface height from 28”
Painted steel frames are 80” high
to 34” via pull-pin adjustment.
Adjustable front lip can be bolted
x 48” wide. Cantilever arms
to the end of the cantilever extend 27”from frame.
support or adjusted inwards in 1” Open frame chanel accepts
increments to change the pitch of Pro-Line modular accessories.
the board.
Single sided or double sided

List
PART NO. DESCRIPTION Wgt.(lbs) Price
FLWH4880S Flexline wire harness bench. 80”high x 48” wide x 30.25” deep. Cantilever arms 110 2,434
48"Lx80"Hx30.25" adjust from 28” to 34” on 1” increments. Front lip adjusts in on 1” increments. Single Sided
FLWH4880S Flexline wire harness bench. 80”high x 48” wide x 30.25” deep. Cantilever arms 145
48"Lx80"Hx57.75" adjust from 28” to 34” on 1” increments. Front lip adjusts in on 1” increments. Double Sided

Pro-Line Ergoline hand crank height adjustable work bench, with built in
90 degree electric tilt. Included with the tilt is our adjustable front lip to
captivate the wire harness board.

The work surface adjusts up and down via hand crank and the tilt works
via foot pedal.

Shown with optional, louvered bin arms, uprights, overhead light with tool
balancer, personal fan and steel board to attach drawings with magnets.

List
PART NO. DESCRIPTION Wgt.(lbs) Price
EL6030/WH48/90 Hand crank height adjustable work bench 60”L x 30”D to 42”H. Price includes
195 2,434
60”x30”x30”/42 48”x 30” 90 degree electric tilt section with front lip.
ABH-1/E Articulating Bin Arm, painted steel louvered panel 17”H x18”W extends up to 35
17”x18”x30” 30” from upright with extra arm to extend past harness frame.
 ELECTRIC HEIGHT ADJUSTABLE WIRE HARNESS BENCH 96" LONG X 36" DEEP and 48" deep. WHEN FULLY TILTED
FRONT EDGE OF FRAME IS 24.5" FROM FLOOR AND ADJUSTS UP TO 40.5". PRICE INCLUDES FRONT LIP TO
CAPTIVATE BOARD. FOOT PEDAL OPERATION HEIGHT ADJUSTABLE.

The 36" deep model features a dual motor tilt system and the 48" model features dual motor tilt and quad motor lift.
List
PART NO. DESCRIPTION Wgt.(lbs) Price
EWH9636 Wire harness table with a 96”L x 36”W platform to hold wire harness assembly boards. 436 2,434
96"Long x 36" With electric height adjustment and electric tilt.
EWH9648 Wire harness table with a 96”L x 48”W platform to hold wire harness assembly boards. 489
96"Long x 48" deep With electric height adjustment and electric tilt.

Up to 40’ long wire harness bench

Joinable Wire Harness Station 96" long x 48" deep x 29.250" high when in the flat. Unit adjusts via an electric lead
screw. Price includes an 80 degree electric tilt. Both height and tilt adjustment to work via foot pedal. Price includes
Master control box that allows benches to be bolted together, any of the connected benches can be designated as
master and the balance of the connected benches to work in unison with the master.
THIS UNIT SHIPS ASSEMBLED ONLY.
List
PART NO. DESCRIPTION Wgt.(lbs) Price
WHJ9648/80/EX Wire harness table with a 96"L x 48" W platform to hold wire harness assembly 286 2,434
84"Lx42"Deep boards. Electric height adjustment with 80 degree tilt, can be connected together.
The MWH Manual Height Adjustable Wire Harness assembly benches are designed for the ergonomic assembly of wire
harnesses. The unit comes with a 72" x 36" platform capable of holding boards from 24" wide to 24" long up to 48"
wide x 96" long. The platform comes with an adjustable front rail that captivates boards from .250" thick to .750" thick.
The MWH7236 features a 60 degree 13 position 150 pound capacity tilt. The MWH9636 features a 250 pound capacity.
List
PART NO. DESCRIPTION Wgt.(lbs) Price
MWH7236 Wire harness table with a 72"L x x36" W platform to hold wire harness assembly 240 2,434
72"Lx36"W boards. With hand crank height adjustment and manual tilt.
MWH9636 Wire harness table with a 96"L x x36" W platform to hold wire harness assembly 240
96"Lx36"W boards. With hand crank height adjustment and manual tilt.
PCN6696TR Pivoting tool tray counter balanced to stay level as frame is tilted. 96" long x 6" 65
96"Lx6"Dx6"H deep x 6" high. Painted steel to match frame
PCN6672TR Pivoting tool tray counter balanced to stay level as frame is tilted. 72" long x 6" 65
72"Lx6"Dx6"H deep x 6" high. Painted steel to match frame
CPMWH Connecting Bracket for the Manual Wire Harness bench, allows for the MWH 2
2"x4"x.090 to be bolted together. Set of 4. MUST BE ORDERED INITIALLY, CANNOT BE AN ADD ON

Email: Bench@1proline.com www.1proline.com

Pro-Line 10 Avco Rd Haverhill MA 01835 PH (800) 739-9067 FX (978) 374 4885