Paper Plane Interceptor
Paper Plane Interceptor
Paper Plane Interceptor
This plane has a central vertical stabilizer on the fuselage that helps produce
excellent straight flights. Make sure to complete the final step of the instructions for
good performance.
Orient the template with the “UP” arrow at the top of the
page. Then, flip the paper over onto its backside, so that
you cannot see any of the fold lines.
Pull the top right corner down toward you until fold line
1 is visible and crease along the dotted line. Repeat with
the top left corner.
Fold the right side over again and crease along fold line
2. Repeat with the left side.
30
Fold the nose down toward you along fold line 3.
Fold the tip of the nose back away from you and crease
along fold line 5.
Flip the plane over. Fold the right half of the plane over onto
the left half along fold line 6. Cut along the dotted line 7 for the
vertical stabilizer.
Tuck the flap that was formed by your cut between the two
halves of the plane and crease it along fold lines 8.
Flap
31
When you have completed the step above, your plane will look
like this.
32
UP
1
1
2 2
8 8
7
9 9