User Manual SNH p6410bn English Web 1113
User Manual SNH p6410bn English Web 1113
User Manual SNH p6410bn English Web 1113
0678 !
SPECIFY SERVICE INSTRUCTIONS AND WARRANTY TERMS
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC NOTE:
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE
CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.
SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE
EQUIPMENT.
Operational Description
The operational description shall fulfil the requirements of Rule Part 2.1033(b)(4). The rule
Samsung SmartCam part requires, "A brief description of the circuit functions of the device along with a
statement describing how the device operates. This statement should contain a
User Manual description of the ground system and antenna, if any, used with the device".
The above requirement has been further interpreted by the FCC to mean that the
description shall:
Copyright
a. be an operational or technical description of how the device operates, is modulated
2015 Hanwha Techwin Co., Ltd. All rights reserved. and meets requirements;
b. describe the EUT completely. What is it (in plain English as well as technical terms)?
Trademark
Give a clear, concise functional description of device operation.
Each of trademarks herein is registered. The name of this product and other trademarks c. always describe the signal, such as modulation type, pulse repetition rate, signal type
mentioned in this manual are the registered trademark of their respective company.
and information being sent. Describe all modulation types and all data rates.
01
Remote monitoring
- Whenever and wherever if you are in the Internet enabled environment, remote
monitoring is ready for you.
- PC, laptop or smart phone can be used for monitoring.
Real-time alarm
GETTING STARTED - When a motion and sound are detected, your smartphone will generate real time
alarms.
Cloud Storage
- Users can automatically upload event photos to their Picasa accounts.
- Anytime anywhere you can enjoy the video and images stored in the cloud
storage.
Saving in SD card
Features 4 - When an event occurs, the user can save the video in their SD card.
Two-way Audio
- With the built-in speakers and microphone, you can make Two-way
Whats Included 5 communications.
However, it is available only with the smart phone. (Not applicable to the PC or
laptop computer.)
SNS (Social Networking Service) Alarm supported
Part names and functions 6 - Provide event alerts through Picasa.
Power Supply 7 - Share your photos with your friends.
Connecting the Ferrite Core to the power supply IR LED
adaptor 7 - At low illumination levels, you can use an IR LED for monitoring purposes.
Network connection 7
4 English
Whats Included
Check for components when opening the product package.
01
Getting Started
Camera & Bracket body Power Adaptor Network Cable Quick Start Guide
n ` Keep the packing container. You will need the serial number later to register the camera.
5
Part names and functions
Wi-Fi Direct button
Create a Wi-Fi connection for your camera and
Power / Network status LED smart phone.
Network port
DC 5.0V 2.2A
NETWORK
M/C : SNH-P6410BN/EX
6 English
2. As shown in the figure, place the ferrite core about 10 cm away from the
Power Supply warning tag of your adaptor and roll it up to show the two lines of power
supply outside. Then close the ferrite core.
Plug-in the camera power adapter to the wall outlet and connect the camera as
shown.
n ` Make sure to use the provided power adaptor. If you use an adaptor other than the 01
power supply adaptor provided in our package, the product may not operate properly.
` It will take about 1min for the camera to boot-up completely.
Getting Started
` When the boot-up is complete, the power LED color will change from red to blue.
RESET
M/C : SNH-P6410BN/EX
Network connection
HANWHA TECHWIN CO., LTD. MADE IN CHINA
LED status
Connecting the Ferrite Core to the power supply adaptor
LED indicator shows operational status with colors.
Refer to table below for detailed meaning of the LED indicator.
Ferrite Core can stabilize the power supply.
1. Open the Ferrite Core included in the package. Color Status
Red Booting up
Red Blinking Booting completed / Establishing network connection
Blue Blinking Connecting to the network.
Blue Local connection established
Green Connection to server completed / Normal operation
Purple Updating firmware
7
Installation
Precautions
02
1. Install the camera in a place where the Wi-Fi signal can be reached and
without interference.
INSTALLATION & 2.
3.
Keep it away from humidity such as around the humidifier.
Keep it away from direct sunlight, strong light or dust; install it in a place with
NETWORK CONNECTION 4.
clear view.
Do not install it in a place where there are a lot of obstacles.
5. Keep the lens clean at all times.
Wipe off the dust with a soft cloth.
Installation 8
Precautions 8
Wall Mounting Using Double-sided adhesive tape 9
Wall Mounting with Screws 11
Desktop mounting 12
8 English
Wall Mounting Using Double-sided adhesive tape Assembling
1. Take out the wall fixing tape.
Separating the wall-mount bracket 2. Remove the rectangular protective film from
the adhesive tape and attach it to the
1. While pulling the button in the back of the bracket, press the bottom of the bottom of the wall-mount bracket.
opposite side of the button to remove the bracket wall.
ET
02
RES
K
OR
NE TW
2.2A
5.0V
DC
CA M
XXX
A
XX
CHIN
XX-
XXX
ART
E IN
XX-
XXX
. MAD
XX-
N
G SM
XXX
N/EX
10B
XX-
: XXX
-P64
10B
, LTD
XX-
UN
SNH
-P64
S:
3 S/N
N CO.
3.
RES
: SNH
SAMS
EL :
HWI
201
MOD
Hold the handle for the wall fixing tape, remove the release paper to attach
ADD
M/C
TEC
Aug
MAC
the tape.
9
4. Firmly insert the bracket from the opposite side of the button until you hear a Adjusting the Angle
clicking sound.
1. Adjust the cameras shooting angle as
appropriate.
5. Connect the adaptors plug to the power terminal on the cameras rear side. 2. Open the cap in the area marked in the figure
and use a driver to turn the screw clockwise to
n ` When done, remove the protective film from the lens. fasten and fix the recording angle.
3. If you turn the screw counterclockwise, it will be
loosened and you can adjust the recording
angle then.
RESET
M/C : SNH-P6410BN/EX
10 English
4. Use drill bit of 5mm diameter and drill on the
Wall Mounting with Screws marked positions, drill to have 3 cm depth
holes. Clean the holes after drilling.
n ` For more information about step of Separating the wall-mount bracket, refer to "Wall
Mounting Using Double-sided adhesive tape". J ` Be careful not to get injured while drilling.
Assembling
1.
2.
Take out screws (M3xL20), and anchors (5x25mm).
On a wooden wall, use screws to fix the
02
wall-mount bracket as shown in the figure. 5. Insert an anchor for each hole. Fully insert
Using a driver on the wall to attach it to, anchors by hammering lightly the anchor
3. If fixing on a concrete wall, use screws and anchors to fix wall-mount bracket. n ` For further steps, refer to the instructions for
First, mark on the wall as shown in the figure below. "Wall Mounting Using Double-sided
adhesive tape".
11
Desktop mounting
Network Connection and Settings
n ` For more information about step of Separating the wall-mount bracket, refer to "Wall
Mounting Using Double-sided adhesive tape". Precautions
M/C : SNH-P6410BN/EX
12 English
Connecting via network cable Wi-Fi connection setting
If you do not have a Wireless Access Point, you must connect the camera using If you want to connect a camera to Wi-Fi, first connect the network cable and try
LAN cable directly to your home router. to make a connection to the Wi-Fi network.
1. When you apply the power, the power status LED is lit red, and it will change 1. When you apply the power, the power status LED is lit red, and it will change
to red blinking when the booting is completed. to red blinking when the booting is completed.
2. Connect the network cable to the camera and to the home router as shown 2. Use the network cable (LAN cable) to connect the LAN port of the unit to the
below. LAN port of the Wireless Access Point.
02
SAMSUNG SMART CAM
MODEL : SNH-P6410BN
M/C : SNH-P6410BN/EX
MADE IN CHINA
2.2A
<Hub>
<Modem>
3. The status LED will become steady blue once the camera is connected to <Modem>
the router. (may take up to 30sec).
If the status LED (blue) is not lit, repeat steps 2 through the end and check it 3. Register and select the camera according to guide of 03. Monitoring.
again.
4. Set your wireless network environment using the guideline <Wireless
4. The status LED will became steady green once the camera is connected to Network> on page 24.
server.
n ` If you want to connect your camera to Wi-Fi, you need a hub that supports wireless
n ` It is recommended to set the router to DHCP(Dynamic Host Configuration Protocol) networking.
server.
If you want to use static IP address, please refer to <Wired Network> on page 23.
` Using the camera's Wi-Fi Direct function, you can easily make a Wi-Fi connection from
your mobile phone.
` If the routers UPnP is not set, then you might be connected in relay mode.
` When the wireless network settings are completed, remove the LAN cable.
The settings may differ depending on the connected Broadband Router model.
For more information, refer to the user manual of the applicable router. ` If you fail to connect to the Internet service, contact the service provider for details.
13
Registration
Once you register the product with the site, you can monitor the camera video on
the PC or laptop computer.
MONITORING
Registration 14
03
Event Alarm 29
Web browser requirements
Windows
Windows 7 supported
- Internet Explorer 9 or higher
(The 64-bit is not supported.)
- Firefox
- Firefox
- Safari
Mac
Mac OSX 10.7 Lion or higher is
supported
Support 31
Setup 22
Basic Info 22
Network 23
Time 25
Alarm & Notification 26
Alarm Schedule 28
SD card 28
14 English
Plug in installation 3) Click <Install> to begin the installation.
You need to install your plug in to automatically search for cameras connected to
the network and view the video in your camera.
n ` If you login or click <Starting SmartCam> in a PC where the plug in is not installed,
the installation message window will pop up.
` When you install the plug in, the web browser will be terminated and you need to
launch it again.
Monitoring
For Windows
2) Click <Next>.
15
For Mac 4) Enter MAC PC password and click <Install Software>.
2) Click <Continue>.
16 English
5. Enter the requested information, and click <Sign Up>. 6. According to the network connection and setting, click <Next> when the
camera LED turns into green.
ID : Using alphabetical characters and numbers, make a combination 7. Select the serial number of the camera to be added from the camera search
03
using 8 to 14 letters. list.
Password : To strengthen security, create a password with a combination If the camera is not found, enter the serial number manually.
of special characters, numerals and English letters.
Monitoring
8. Click <Next>.
17
9. Create <Camera Name> and <Camera password>. 12. Select your Wireless Network from the list.
10. Click <Next>. 13. Enter the password of your Wireless Network and click <Next>.
n ` The camera password is used to block the unauthorized access to your camera.
` Create camera password using alphanumeric characters between 1 to 8 without any
space.
n ` If your Wireless Network is hidden, select <Other Wi-Fi Networks (not listed)>.
11. After adding the camera, click <Yes> in the wireless network setup pop-up ` Select <Display password> to display the password.
window.
14. Click <OK>.
18 English
15. Unplug the network cable from the camera and the router.
16. Click <Finish> if the <Finish> button is activated. Live Video
1. Select a camera from the camera list at the upper left hand of the screen.
03
17. Once the camera is successfully registered, you can check the camera in the n ` The gray icon indicates the camera is inactive so you cannot monitor it right now.
camera list.
2. Enter the camera password and click <OK>.
Monitoring
n ` Check on <Remember> to access your camera without entering the password next
time.
` If you want to change the Camera password, please refer to <Basic Info> on page
22.
19
Monitoring options Item Description
A dark spot will be brighter and a bright spot will be darker to
WDR
bc compensate for the backlight.
Motion zone setting It detects motion within the range set by a user.
When enabled, you can hear whats happening around the camera.
Sound ` Some internet service providers do not support audio outputs in
relay mode.
Default Camera Set the default camera to monitor in the camera list. ` If you double-click the screen, the full screen mode is terminated.
b Delete Camera Delete the registered camera. m Brightness You can adjust the brightness of the screen image.
Cancel remembering
c camera password
Cancel remembering the camera password.
20 English
Item Description Motion Zone Setting
Network Speed
3)
Profile Name Resolution Frame rate
Recommended
bandwidth
Click on <OK>.
If you want to delete the set area, click on <Delete All>. 03
Low Speed Network VGA 20 fps 0.7Mbps n ` The <Motion Detection> function needs to be activated in order to use the motion
zone function.
Monitoring
Mid Speed Network HD(720P) 15 fps 1Mbps
` When the motion detection function is activated, any motion will be detected, even if
High Speed Network Full HD(1080P) 30 fps 2.8Mbps no motion zone is set.
21
Setup
Item Description
c Camera Name Click the <Modify>, you can change the camera name.
You can check the current version and the latest version of your
Firmware Version
camera S/W.
You can turn on/off the LED in your camera.
Status LED
` The LED will illuminate when the power supply is reconnected.
You can reduce the occurrence of screen shaking due to the frequency
mismatches with the neighboring lighting.
Flickerless
b ` If you use the flickerless function outdoors (in a bright environment),
image saturation may occur.
c
This encrypts the image transmitted.
Image encrypting ` The image encryption function may affect the image transmission
function.
n ` If you change the camera password, you will be logged out and return to the camera
password input page.
` Keep the camera password in a safe place as it is used for viewing the live screen of
the camera or for changing the display settings.
22 English
Firmware update
Network
If the currently used S/W is not of the latest version, update it.
If you are using the latest version, then the firmware will not be activated.
1) Click <Firmware>. <Wired Network>
Monitoring
3) When the firmware update is finished, the camera will reboot.
23
n ` If any of the manual settings is wrong, the network settings will not be applied. Item Description
` If you have both cable and wireless network connections simultaneously, the cable Wireless On/ You can select to activate or deactivate the wireless network
network connection is prioritized. Wireless Off connection.
` If you switch from the current wireless connection to the cable connection, the network You will see a list of APs (Access Point) available. Select a desired one
will switch to cable connection accordingly. b AP (Access Point) list
from the list of APs (Access Point).
` For more information about the router or the wireless connection, refer to the If you select a secured AP (Access Point), you must enter the
AP (Access Point)
documentation of the router or contact the router manufacturer. c password
password before you can access the network.
For the password, contact your network administrator.
<Wireless Network>
If your SSID is hidden, select the type of security you have. Enter the
Hidden SSID
name of the SSID and the password.
n ` If you select a non-secured AP (Access Point), you just can access the network without
providing a specific password.
` If you entered a wrong password, you cannot access the network whatsoever.
` When the wireless network settings are completed, remove the LAN cable. If you do
not remove the LAN cable, the wireless network will not be available.
24 English
n ` The time will synchronize with the NTP(Network Time Protocol) server automatically.
Time For this, Internet connection is required.
` You need to set the timezone correctly to obtain the exact time setting.
` The time displayed without Internet connection may not be accurate.
b
c
03
Monitoring
Item Description
25
Alarm & Notification <Gmail> Notification
The event alarm is sent through Gmail.
Camera has ability to send event notifications when motion or audio is detected. 1. Select the Google.
2. Enter your Gmail address and password.
3. Select <Use> of "Send alarms".
4. Enter your email address to receive the notification e-mail and click <Add>.
Now, the receiver full email address will be shown in the List Box. If you want
to register more than one email address, you can just repeat the same
procedure.
5. Click <Save>.
Item Description
You can set motion or audio alerts. Sensitivity level can also be set.
The higher the sensitivity, the more accurate motion and audio events <Receiver
Alarm notification can be detected. email address>
n ` In the following case, it may fail to derive the proper results for basic events and
`
motion detection. n `
If your Google email ID/password are saved, only check "Send alarms".
If the email address for the recipient entered is incorrect, event alerts will not be sent.
- The object color or brightness is similar to the background.
- Multiple movements continue occurring at random due to a scene change or other reasons. ` Even if you entered a correct google account ID, if the ID/password confirmation pop up
window appears, click on <Go to the google page.> and check the google account.
- A fixed object continues moving in the same position.
- An object hides other objects behind.
- Two or more objects overlap or one object divides in multiple portions.
- A moving object comes close to the camera.
26 English
<Picasa> Notification Push alarm Notification
Automatically uploads a image to your private Picasa account. The push alarm is provided through the web viewer and mobile app in which the
camera is registered.
1. Select the Google.
2. Enter your Gmail address and password.
3. Click <Save>.
4. Check <Use> of Picasa.
5. Click <Authentication requests.>
6. Sign in with your Google account.
7. Click <Access>.
8. Copy the code on the authority request page, then click <Apply>.
If you activated Use, then image links uploaded into Picasa will be sent to the
03
friends listed in real time.
Push alert list shows the list of IDs of users who registered cameras.
When an alarm occurs, the web site will send push alerts to each smart phone.
Monitoring
n ` If your Google email ID and password are saved, check the use of Picasa only.
` Refer to the policy of Picasa for the maximum number of uploaded images.
27
Alarm Schedule SD card
When the user designates a desired day and time, the alarm works only at the When an event occurs, it is saved in an SD card.
designated time.
b
b
c
c
Item Description
If you set motion/audio, video will be automatically saved in your SD
Use the SD card
card.
b Continuous Recording Saves the video without being interrupted by events that may occur.
Item Description
If the SD card capacity is insufficient, it will start overwriting the oldest
Alarm function will only operate for the time/day designated by the data.
Only Scheduled Time c Overwrite
user. ` When there is storage capacity of 10% remaining, the top
notification window will show an alarm.
b Always Alarm function always operates.
You can click and drag to set the motion time in hours. SD Card Status Check the remaining capacity of your SD card and delete all the data.
c Motion time settings Example) When you select 00, an event will occur and remain from
00 to 00:59
28 English
n ` Turn off the camera power or set it to <Off> before removing the micro SD card. If you
`
fail to do this, the data in the micro SD camera may be damaged.
Please note that the content of a micro SD card used for other purposes may be
Event Alarm
deleted when it is mounted in the camera.
You can check the event alarm that occurred.
` The following micro SD cards are recommended for this camera.
Manufacturer : Sandisk, Transcend
Class 6 or higher, MLC type
` Micro SD card of max 32GB is supported and a FAT32 file system is supported. c
` It is recommended to use the micro SD card after formatting it. Regularly formatting
the memory card will help extend its life.
03
b
Monitoring
Item Description
Select and click on the desired event. You can view an image.
b Image displays
` Image is displayed only if Picasa is activated.
c Delete All Delete all the event alarms for thirty days.
Display Events Displays the number of events occurred in the 30 day list.
n ` Even if you delete an event in the event notification page, the Picasa event will not be
deleted.
29
Playback Information
You can play the video recorded in your SD card.
b
c
Item Description
Type Set the event type to search for during the search period.
b Date Set the search date for the data saved in your SD card.
Timeline Use the timeline to play the video in the desired time.
30 English
My Account Support
You can download the Samsung SmartCam mobile app and user guide.
03
Monitoring
n ` If you want to change the member information, click on <Account>. Select the item
(password, or email address) and enter your information.
31
Specifications
Specifications
APPENDIX
Specifications
04 32
Video
Imaging Device
Effective Pixels
Scanning System
Synchronization
Item
Progressive
Internal
Description
0.3Lux(Color), 0Lux(Black/White)
Specifications 32 Lens
Product Appearance 35 Focal Length (Zoom Ratio) 2.8mm
32 English
Item Description Item Description
TCP/IP, DHCP, SMTP, DNS, RTSP, RTCP, RTP, HTTP, TCP, UDP,
04
Protocol
Digital Zoom (viewer support) 4X (Mobile), 10X (Web) STUN, TURN, XMPP, SIP, uPNP, SNTP, IPv4, ICMP, Bonjour
Appendix
Flip / Mirror Support Streaming Method Unicast
Booting time Max 1 minutes Max. User Access 5 users at Unicast Mode
33
Item Description
Fun
Environmental
Electrical
Mechanical
Weight 293g
34 English
Product Appearance
04
Appendix
35
Troubleshooting
Problem Action
- Move to Setup Alarm & Notification and adjust the sensitivity as
necessary.
If you encounter a problem with your system, see the table below to solve the problem - From the Alarm & Notification setup, configure the Picasa notification
as quickly and easily as possible. Please follow the instruction below: settings. (See page 27 of the manual)
The capture images in
- Picasa has different service policies according to the country. The policy for
the camera will not be
your country may prohibit uploading to Picasa. Please first check the Picasa
Problem Action uploaded to Picasa.
policy for your country.
- Move to "Log-in page Forgot your ID/Password?", and enter the - According to the Picasa policy, it may limit the uploading size. Check the
registered e-mail address to which we will send you the user ID and/or a allowable free space of your Picasa account, and if insufficient, delete the
I forgot my user ID/ exiting images.
new password.
password.
It can be spammed out depending on the policy of the email server.
The video from the - The video from the camera can be delayed according to a network delay.
After logged in, it is advisable to change the temporary password provided.
camera is temporarily Please check if the camera is installed in a place of proper wireless Internet
- If the camera's wireless internet indication LED goes off too often, then it lost. communications.
Camera is not means that the camera installation location is not optimal for the wireless
- Click the Voice icon in the video playback page, or check if the voice is
connected to the internet environment, so in this case, locate the camera close to the wireless No sound is output
turned On in your smart phone app.
wireless hub. hub and try to connect again. from the video.
- Some internet service providers do not support audio outputs in relay mode.
- Check the password for the wireless hub and try again.
- You must create a new camera password.
- Check that the serial number entered matches the label on the back of the
- Press the initialization button on the back of the product for more than 10
camera. I forgot my Camera
seconds to reset to factory settings.
- Enter the correct password for the camera registered again and try to password.
- After factory initialization, when you access the camera, you can reset the
register the camera again.
password for the camera.
After logged in, - Check the camera LED to see if it is green. If not, then check the network
I failed to register the connection. I want to change my
camera. - If you are still unable to register the camera after this, then reset the camera - After logging in, click on the <Account>. Select the item (password, or
password and/or
to factory settings and begin again. email address) and enter your information.
email address.
(If you want to reset to factory settings, press and hold the initialize button
on the back for 10 sec. Once initialized to factory settings, the camera will - Check the UPnP setting of the router.
Camera will be
be restarted.) - Using a network upload speed of 500Kbps or higher is recommended.
connected in a relay
- Depending on the policy of your service provider, you can access in relay
mode.
mode.
36 English
Samsung cares for the environment at all product manufacturing stages, and is taking
measures to provide customers with more environmentally friendly products.
The Eco mark represents Samsung devotion to creating environmentally friendly
products, and indicates that the product satisfies the EU RoHS Directive.
(Applicable in the European Union and other European countries with separate
collection systems)
This marking on the product, accessories or literature indicates that the product and
its electronic accessories (e.g. charger, headset, USB cable) should not be disposed
of with other household waste at the end of their working life. To prevent possible
harm to the environment or human health from uncontrolled waste disposal, please
separate these items from other types of waste and recycle them responsibly to
promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this
product, or their local government office, for details of where and how they can take
these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions
of the purchase contract. This product and its electronic accessories should not be
mixed with other commercial wastes for disposal.
SALES NETWORK
HEAD OFFICE
6, Pangyo-ro 319beon-gil, Bundang-gu, Seongnam-si, Gyeonggi-do, 463-400 Rep. of KOREA
Tel : +82-70-7147-8753, 8764 Fax : +82-31-8018-3740
www.samsungsecurity.com
SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE LTD.
100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Samsung House, 1000 Hillswood Drive, Hillswood Business Park Chertsey,
Customer support : +1-877-349-3149 Surrey, UNITED KINGDOM KT16 OPS
www.samsungsv.com Customer support : 00800-8010-8022
www.samsungsecurehome.eu