ST-V2 Mach3 Board PDF
ST-V2 Mach3 Board PDF
ST-V2 Mach3 Board PDF
User Manual of
5Axis Breakout Board
5 Axis Breakout Board Interface Adapter ECG-SAVEBASE
Easy Commercial Global is not liable or responsible for any accidents, injuries, equipment
damage, property damage, loss of money or loss of time resulting from improper use of electrical
or mechanical or software products sold on this website or other Easy Commercial Global sales
resources.
Since Easy Commercial Global basically provide OEM machine builders components to build
their machines for their own use or third party use it is their responsibility to maintain certify and
comply the end user products built base on out components sold on this website or other Easy
Commercial Global sales resources.
Assembling electrical CNC machine component like power supplies, motors, drivers or other
electrical components involve dealing with high voltage like AC alternative current or DC direct
current which is extremely dangerous and need high attention & essential experience and
knowledge of software, electricity, electro-mechanics or mechanics.
Contents
2 Specifications ............................................................................................................................ 1
3 Interfaces ................................................................................................................................... 2
1.1 Introduction
The latest upgraded 5 axis breakout board is specially designed for the CNC single axis 2-phase
stepper driver controller, such as M542, M542H, MA860H, 2M542, 2M982, DM542(A),
DM860(A) etc. single axis stepper driver controller series. With this 5 axis breakout board, any
1-5 single axis stepper driver controllers can be directly controlled by the PC via the MACH3,
EMC2, KCAM4, etc.
1.2 Features
Maximum support 5-axis stepper motor driver controllers
Compatible with MACH3, Linux CNC (EMC2) etc. parallel-control CNC software.
USB power supply and peripherals powered phase are separated to protect computer security.
All the signals are opto-isolated which can protect your computer security.
5-input interface to define the Limit, Emergence-Stop, Cutter alignment, etc.
Wide input voltage range: 12-24V, and with anti-reverse function.
One relay output control interface, accessed by the spindle motor or the air pump, water
pump, etc.
Output 0-10V analog voltage for inverter to control the spindle speed.
2 Specifications
1
5 Axis Breakout Board Interface Adapter ECG--SAVEBASE
3 Interfaces
2
5 Axis Breakout Board Interface Adapter ECG--SAVEBASE
Note: The settings on MACH3 below is in condition that breakout board and stepper drivers are
connected in common anode.
3
5 Axis Breakout Board Interface Adapter ECG--SAVEBASE
4
5 Axis Breakout Board Interface Adapter ECG--SAVEBASE
4. Enter in Port Setup and Axis Selection to set Port#1 and Kernel Speed shown as
below.
5
5 Axis Breakout Board Interface Adapter ECG--SAVEBASE
6
5 Axis Breakout Board Interface Adapter ECG--SAVEBASE
7
5 Axis Breakout Board Interface Adapter ECG--SAVEBASE
If you use PWM to control the spindle speed, you have to click Pulley Selection to set it
shown as below.
8
5 Axis Breakout Board Interface Adapter ECG--SAVEBASE
10. Click System HotKeys Setup. Set X, Y, Z axis hotkey shown as below. Then you can
manual control the corresponding axis motor turning via hotkeys.